fix: mass fix for net references and pin identifiers (#229)

boards/SparkFun-Altitude-Pressure-Sensor-Breakout-MPL3115A2/SparkFun-Altitude-Pressure-Sensor-Breakout-MPL3115A2.circuit.tsx

@@ -24,7 +24,7 @@ export default () => (
       />
       <capacitor
         name="C2"
-        connections={{ pin2: sel.C1.pin2 }}
+        connections={{}}
         pcbX={5.08}
         pcbY={1.27}
         pcbRotation={-90}

boards/SparkFun-Altitude-Pressure-Sensor-Breakout-MPL3115A2/index.tsx

@@ -1,3 +1,3 @@
-import MPL3115A2R1 from "./SparkFun-Altitude-Pressure-Sensor-Breakout-MPL3115A2.circuit"
+import MPL3115A2R1 from "./sparkfun-altitude-pressure-sensor-breakout-mpl3115a2.circuit"
 
 export default MPL3115A2R1

boards/SparkFun-Atmospheric-Sensor-Breakout-BME280/SparkFun-Atmospheric-Sensor-Breakout-BME280.circuit.tsx

@@ -66,7 +66,6 @@ export default () => (
       schX={2.3}
       schY={1.6}
       connections={{
-        pin1: sel.U1.pin6,
       }}
       pcbX={-3.81}
       pcbY={-3.175}

boards/SparkFun-Atmospheric-Sensor-Breakout-BME280/index.tsx

@@ -1,3 +1,3 @@
-import BME280BREAKOUT from "./SparkFun-Atmospheric-Sensor-Breakout-BME280.circuit"
+import BME280BREAKOUT from "./sparkfun-atmospheric-sensor-breakout-bme280.circuit"
 
 export default BME280BREAKOUT

boards/SparkFun-Breakout-Board-for-XBee-Module/index.tsx

@@ -1,2 +1,2 @@
-import XBeeBreakout from "./SparkFun-Breakout-Board-for-XBee-Module.circuit"
+import XBeeBreakout from "./sparkfun-breakout-board-for-xbee-module.circuit"
 export default XBeeBreakout

boards/SparkFun-Cryptographic-Co-Processor-Breakout-ATECC508A/SparkFun-Cryptographic-Co-Processor-Breakout-ATECC508A.circuit.tsx

@@ -152,8 +152,8 @@ const MotionSensor = () => (
       pcbY={-5}
       layer="bottom"
       connections={{
-        pin2: "R3.pin2",
-        pin1: "net.V3_3",
+        pin2: sel.R3.pin2,
+        pin1: sel.net().V3_3,
       }}
     />
 

boards/SparkFun-DeadOn-RTC-Breakout-DS3234/SparkFun-DeadOn-RTC-Breakout-DS3234.circuit.tsx

@@ -19,25 +19,24 @@ export default () => {
           name="U1"
           pcbRotation={180}
           connections={{
-            pin4: "net.VCC",
-            pin18: "net.SCLK",
-            pin20: "U1.pin18",
-            pin19: "net.MISO",
-            pin17: "net.MOSI",
-            pin1: "net.SS",
-            pin5: "net.INT",
+            pin4: sel.net().VCC,
+            pin18: sel.net().SCLK,
+            pin19: sel.net().MISO,
+            pin17: sel.net().MOSI,
+            pin1: sel.net().SS,
+            pin5: sel.net().INT,
           }}
         />
         <jumper
           cadModel={null}
           connections={{
-            pin7: "net.GND",
-            pin6: "net.VCC",
-            pin5: "net.INT",
-            pin4: "net.SCLK",
-            pin3: "net.MISO",
-            pin2: "net.MOSI",
-            pin1: "net.SS",
+            pin7: sel.net().GND,
+            pin6: sel.net().VCC,
+            pin5: sel.net().INT,
+            pin4: sel.net().SCLK,
+            pin3: sel.net().MISO,
+            pin2: sel.net().MOSI,
+            pin1: sel.net().SS,
           }}
           name="JP1"
           schX={-7}
@@ -51,14 +50,14 @@ export default () => {
           layer={"bottom"}
           schX={3}
           schY={0.5}
-          connections={{ pin1: "U1.VBAT", pin2: "U1.pin10" }}
+          connections={{ pin1: sel.U1.VBAT, pin2: sel.U1.pin10 }}
         />
         <capacitor
           name="C1"
           schRotation={-90}
           schX={-3.2}
           schY={-2}
-          connections={{ pin1: ["JP1.pin6", "R1.pin2"], pin2: "net.GND" }}
+          connections={{ pin1: ["JP1.pin6", "R1.pin2"], pin2: sel.net().GND }}
           capacitance={"22pF"}
           footprint={"cap0402"}
           pcbRotation={90}
@@ -68,7 +67,7 @@ export default () => {
         <resistor
           name="R1"
           schRotation={-90}
-          connections={{ pin1: "JP1.pin5" }}
+          connections={{ pin1: sel.JP1.pin5 }}
           schX={-4}
           schY={-0.5}
           resistance={"10k"}

boards/SparkFun-Digital-Temperature-Sensor-Breakout-TMP102/index.tsx

@@ -1,3 +1,3 @@
-import TMP102AIDRLR from "./SparkFun-Digital-Temperature-Sensor-Breakout-TMP102.circuit"
+import TMP102AIDRLR from "./sparkfun-digital-temperature-sensor-breakout-tmp102.circuit"
 
 export default TMP102AIDRLR

boards/SparkFun-ESLOV-to-Qwiic-Bridge/SparkFun-ESLOV-to-Qwiic-Bridge.circuit.tsx

@@ -26,7 +26,6 @@ export default () => (
         GND: sel.net.GND,
         VIN: sel.C1.pin1,
         VOUT: sel.C2.pin1,
-        EN: sel.U1.VIN,
       }}
     />
     <netlabel net="GND" connectsTo={sel.U1.GND} schX={-1.2} schY={-0.4} />

boards/SparkFun-ESLOV-to-Qwiic-Bridge/index.tsx

@@ -1,3 +1,3 @@
-import EslovToQwiicBridge from "./SparkFun-ESLOV-to-Qwiic-Bridge.circuit"
+import EslovToQwiicBridge from "./sparkfun-eslov-to-qwiic-bridge.circuit"
 
 export default EslovToQwiicBridge

boards/SparkFun-Full-Bridge-Motor-Driver-Breakout-L298N/SparkFun-Full-Bridge-Motor-Driver-Breakout-L298N.circuit.tsx

@@ -85,21 +85,6 @@ export default () => (
         },
       }}
       connections={{
-        pin1: sel.U1.pin14,
-        pin2: sel.U1.pin12,
-        pin3: sel.U1.pin10,
-        pin4: sel.U1.pin15,
-        pin5: sel.U1.pin13,
-        pin6: sel.U1.pin11,
-        pin7: sel.U1.pin9,
-        pin8: sel.U1.pin7,
-        pin9: sel.U1.pin5,
-        pin10: sel.U1.pin3,
-        pin11: sel.U1.pin1,
-        pin12: sel.U1.pin8,
-        pin13: sel.U1.pin6,
-        pin14: sel.U1.pin4,
-        pin15: sel.U1.pin2,
       }}
       manufacturerPartNumber="M15"
     />

boards/SparkFun-GPS-Breakout/SparkFun-GPS-Breakout.circuit.tsx

@@ -7,12 +7,12 @@ export default () => (
       name="U1"
       pcbY={-2.54}
       connections={{
-        pin1: "JP1.pin6",
-        pin2: "JP1.pin5",
-        pin3: "JP1.pin4",
-        pin4: "JP1.pin3",
-        pin5: "JP1.pin2",
-        pin6: "JP1.pin1",
+        pin1: sel.JP1.pin6,
+        pin2: sel.JP1.pin5,
+        pin3: sel.JP1.pin4,
+        pin4: sel.JP1.pin3,
+        pin5: sel.JP1.pin2,
+        pin6: sel.JP1.pin1,
       }}
     />
     <jumper

boards/SparkFun-GPS-Breakout/index.tsx

@@ -1,3 +1,3 @@
-import SparkFunGPSBreakout from "./SparkFun-GPS-Breakout.circuit"
+import SparkFunGPSBreakout from "./sparkfun-gps-breakout.circuit"
 
 export default SparkFunGPSBreakout

boards/SparkFun-HMC6343-Breakout/SparkFun-HMC6343-Breakout.circuit.tsx

@@ -17,7 +17,7 @@ const HMC6343Breakout = () => (
         SDA: sel.net.SDA,
         SCL: sel.net.SCL,
         CS_CTRL: sel.net.CS,
-        CS: "net.CS_CTRL",
+        CS: sel.net().CS_CTRL,
       }}
       schPinArrangement={{
         leftSide: {

boards/SparkFun-HMC6343-Breakout/index.tsx

@@ -1,3 +1,3 @@
-import HMC6343Breakout from "./SparkFun-HMC6343-Breakout.circuit"
+import HMC6343Breakout from "./sparkfun-hmc6343-breakout.circuit"
 
 export default HMC6343Breakout

boards/SparkFun-HSTX-PTH-Breakout/SparkFun-HSTX-PTH-Breakout.circuit.tsx

@@ -28,23 +28,23 @@ export default () => (
       schY={0}
       pcbX={-4.3}
       connections={{
-        pin22: "JP2.GND2",
-        pin21: "net.D0_N",
-        pin20: "net.D0_P",
-        pin18: "net.D1_N",
-        pin17: "net.D1_P",
-        pin15: "net.CK_N",
-        pin14: "net.CK_P",
-        pin12: "net.D2_N",
-        pin11: "net.D2_P",
-        pin9: "net.D3_N",
-        pin8: "net.D3_P",
-        pin6: "net.GND1",
-        pin5: "net.IO0",
-        pin4: "net.IO1",
-        pin3: "net.SCL",
-        pin2: "net.SDA",
-        pin1: "net.v3_3",
+        pin22: sel.JP2.GND2,
+        pin21: sel.net().D0_N,
+        pin20: sel.net().D0_P,
+        pin18: sel.net().D1_N,
+        pin17: sel.net().D1_P,
+        pin15: sel.net().CK_N,
+        pin14: sel.net().CK_P,
+        pin12: sel.net().D2_N,
+        pin11: sel.net().D2_P,
+        pin9: sel.net().D3_N,
+        pin8: sel.net().D3_P,
+        pin6: sel.net().GND1,
+        pin5: sel.net().IO0,
+        pin4: sel.net().IO1,
+        pin3: sel.net().SCL,
+        pin2: sel.net().SDA,
+        pin1: sel.net().v3_3,
       }}
     />
     <jumper
@@ -78,22 +78,22 @@ export default () => (
       }}
       pinLabels={pinLabels}
       connections={{
-        pin16: "net.D0_N",
-        pin15: "net.D0_P",
-        pin14: "net.D1_N",
-        pin13: "net.D1_P",
-        pin12: "net.CK_N",
-        pin11: "net.CK_P",
-        pin10: "net.D2_N",
-        pin9: "net.D2_P",
-        pin8: "net.D3_N",
-        pin7: "net.D3_P",
-        pin6: "net.GND1",
-        pin5: "net.IO0",
-        pin4: "net.IO1",
-        pin3: "net.SCL",
-        pin2: "net.SDA",
-        pin1: "net.v3_3",
+        pin16: sel.net().D0_N,
+        pin15: sel.net().D0_P,
+        pin14: sel.net().D1_N,
+        pin13: sel.net().D1_P,
+        pin12: sel.net().CK_N,
+        pin11: sel.net().CK_P,
+        pin10: sel.net().D2_N,
+        pin9: sel.net().D2_P,
+        pin8: sel.net().D3_N,
+        pin7: sel.net().D3_P,
+        pin6: sel.net().GND1,
+        pin5: sel.net().IO0,
+        pin4: sel.net().IO1,
+        pin3: sel.net().SCL,
+        pin2: sel.net().SDA,
+        pin1: sel.net().v3_3,
       }}
       cadModel={null}
       pcbX={6}

boards/SparkFun-HSTX-PTH-Breakout/index.tsx

@@ -1,2 +1,2 @@
-import SparkFun_HSTX_PTH_Breakout from "./SparkFun-HSTX-PTH-Breakout.circuit"
+import SparkFun_HSTX_PTH_Breakout from "./sparkfun-hstx-pth-breakout.circuit"
 export default SparkFun_HSTX_PTH_Breakout

boards/SparkFun-Haptic-Motor-Driver-DRV2605L/index.tsx

@@ -1,3 +1,3 @@
-import DRV2605LDGST from "./SparkFun-Haptic-Motor-Driver-DRV2605L.circuit"
+import DRV2605LDGST from "./sparkfun-haptic-motor-driver-drv2605l.circuit"
 
 export default DRV2605LDGST

boards/SparkFun-Human-Presence-and-Motion-Sensor-STHS34PF80-Qwiic/STHS34PF80.tsx

@@ -32,8 +32,8 @@ export const STHS34PF80 = (props: ChipProps<typeof pinLabels>) => (
       },
     }}
     schPinStyle={{
-      GND: { marginTop: "0.15" },
-      INT: { marginTop: "0.15" },
+      GND: { marginTop: 0.15 },
+      INT: { marginTop: 0.15 },
     }}
     footprint={
       <footprint>

boards/SparkFun-Human-Presence-and-Motion-Sensor-STHS34PF80-Qwiic/index.tsx

@@ -1,3 +1,3 @@
-import MotionSensor from "./SparkFun-Human-Presence-and-Motion-Sensor-STHS34PF80-(Qwiic).circuit"
+import MotionSensor from "./sparkfun-human-presence-and-motion-sensor-sths34pf80-qwiic.circuit"
 
 export default MotionSensor

boards/SparkFun-Human-Presence-and-Motion-Sensor-STHS34PF80-Qwiic/SparkFun-Human-Presence-and-Motion-Sensor-STHS34PF80-(Qwiic).circuit.tsx → boards/SparkFun-Human-Presence-and-Motion-Sensor-STHS34PF80-Qwiic/sparkfun-human-presence-and-motion-sensor-sths34pf80-qwiic.circuit.tsx

@@ -40,8 +40,8 @@ const MotionSensor = () => (
       pcbX="-5.08"
       pcbY="3.81"
       connections={{
-        pin1: "net.GND",
-        pin2: "net.V3_3",
+        pin1: sel.net().GND,
+        pin2: sel.net().V3_3,
       }}
     />
     <capacitor
@@ -54,8 +54,8 @@ const MotionSensor = () => (
       pcbX="5.08"
       pcbRotation="90"
       connections={{
-        pin1: "net.GND",
-        pin2: "net.V3_3",
+        pin1: sel.net().GND,
+        pin2: sel.net().V3_3,
       }}
     />
     <net name="GND" />
@@ -85,7 +85,7 @@ const MotionSensor = () => (
       pcbY="-5.08"
       pcbRotation="180"
       connections={{
-        pin2: "JP1.pin3",
+        pin2: sel.JP1.pin3,
       }}
     />
     <resistor
@@ -98,7 +98,7 @@ const MotionSensor = () => (
       pcbX="-2.54"
       pcbY="-5.08"
       connections={{
-        pin2: "JP1.pin1",
+        pin2: sel.JP1.pin1,
       }}
     />
     <netlabel
@@ -132,7 +132,7 @@ const MotionSensor = () => (
       pcbX="-5.08"
       pcbRotation="270"
       connections={{
-        pin1: "D1.pin1",
+        pin1: sel.D1.pin1,
       }}
     />
     <led
@@ -166,7 +166,6 @@ const MotionSensor = () => (
       pcbY="3.81"
       layer="bottom"
       connections={{
-        pin2: "D1.pin2",
       }}
     />
     <netlabel
@@ -193,7 +192,7 @@ const MotionSensor = () => (
       schY={1.8}
       schRotation={90}
       connections={{
-        pin1: "R4.pin2",
+        pin1: sel.R4.pin2,
       }}
       pcbX="10.16"
       pcbY="3.81"
@@ -233,7 +232,7 @@ const MotionSensor = () => (
       schY={-4.8}
       schRotation={90}
       connections={{
-        pin1: "R5.pin2",
+        pin1: sel.R5.pin2,
       }}
       pcbX={-10.16}
       pcbY={0}
@@ -263,7 +262,7 @@ const MotionSensor = () => (
       footprint={JST04_1MM_RA}
       schX={3.5}
       schY={-5}
-      pinLabels={{ 1: "GND", 2: "VCC", 3: "SDA", 4: "SCL" }}
+      pinLabels={{ pin1: "GND", pin2: "VCC", pin3: "SDA", pin4: "SCL" }}
       pcbX="-7.62"
       pcbRotation="270"
     />
@@ -301,7 +300,7 @@ const MotionSensor = () => (
       footprint={JST04_1MM_RA}
       schX={0}
       schY={-5}
-      pinLabels={{ 1: "GND", 2: "VCC", 3: "SDA", 4: "SCL" }}
+      pinLabels={{ pin1: "GND", pin2: "VCC", pin3: "SDA", pin4: "SCL" }}
       pcbX="7.62"
       pcbRotation="90"
     />