added sensirion connector board

[hydronics2]

eagle files and 3d renderings

[Burhan-Q]

@hydronics2 A couple of thoughts/questions:
1 - I believe @capsulecorplab has enabled branch protection for the repo Master branch, so not sure if a direct merge will work, you may need to make a branch of the master repo to merge??
2 - Looking at the connector_board_w_parts.step vs the image of the pogo pins dimensions (specific model indicated by arrows I believe), it seems like the solid pins are significantly longer than the pogo pins; so are the solid pins just a placeholder? Just want to make sure I follow 100%.

Looking at a model @mechatroniks-git made, it looks like the pin dimensions are close to those on the spec sheet, so I may see if I can blend the two models, if you think they're good.

[hydronics2]

@burhan, that's right it's just a placeholder. The dimension of the pogo pins is 5mm proud of the PCB (uncompressed).

[hydronics2]

@Burhan-Q I can also try to dig up the exact pogo pins and re-export the step file if you all think it's necessary. Just let me know!

[Burhan-Q]

@Burhan-Q I can also try to dig up the exact pogo pins and re-export the step file if you all think it's necessary. Just let me know!

I'll check with @mechatroniks-git to see if he has the model of the pins readily available, but I should be good to go with what I have otherwise. Thanks for getting back to me

[hydronics2]

@Burhan-Q Yea I can't readily find or make those exact pins so if @mechatroniks-git has the pogo pins and the connector (step files) that would be super helpful.

[Burhan-Q]

FYI using Part Number P-TET-000029-0 for this version of the PCB in Fusion and added to the Hardware Parts List

[Burhan-Q]

@hydronics2 looks like there's an issue with the pins for the phoenix-style connector. @mechatroniks-git mentioned that the mockup model has them placed in a safe location, could you update your model to have the same location for these pins?

[hydronics2]

@Burhan-Q check it out.. I moved the phoenix connector outboard by 5mm.

https://github.com/hydronics2/project-tetra/tree/master/02_Development/FlowMeter/Sensirion_connector_board

I based the original off of @mechatroniks-git dwg file and it imported correctly into my CAD software so not sure what happened! but see if you can work with this model.

[capsulecorplab]

@hydronics2 do you mind re-titling the pull request to use a closing keyword as specified in how to make design changes?

Also, for future pull requests, it's preferable to create a branch in the main repo as opposed to pulling from a forked repo.

[capsulecorplab]

Responding to @Burhan-Q's question: Yes, branch protection is enabled for the master branch on the main repo, wherein pull requests should be made to after adding commits to a working branch in the main repo, but in this particular instance, the PR was created from the master branch on a forked repo.

[Burhan-Q]

Is this PR ready to be merged or closed? This is part of an issue (#67), but it does not close said issue. @capsulecorplab if you're okay with how things stand, could you please review and merge?

[capsulecorplab]

Is it necessary to add the i2c_extender_p82b715.pdf datasheet?

[capsulecorplab]

Looking at #67 I'm not quite sure what should constitute "closing" the issue, so @Burhan-Q I trust your judgement

[capsulecorplab]

Also, please use a closing keyword in the PR title, if PR closes an issue