feat: add Kurihara n-of-m threshold XOR secret-sharing core

i18n/translations/de-DE.json

@@ -19,6 +19,7 @@
     "Additional entropy from camera required for %s": "Zusätzliche Entropie von der Kamera erforderlich für %s",
     "Address": "Adresse",
     "Align camera and backup plate properly.": "Richte Kamera und Sicherungsplatte richtig aus.",
+    "All shares must have the same number of words.": "Alle Teile müssen gleich viele Wörter haben.",
     "Anti-glare mode": "Blendschutzmodus",
     "Appearance": "Aussehen",
     "Are you sure?": "Bist Du sicher?",
@@ -48,8 +49,10 @@
     "Confirm Tamper Check Code": "Bestätigen Sie den Tamper Check Code",
     "Convert Datum": "Datum konvertieren",
     "Could not determine change address.": "Änderungsadresse konnte nicht ermittelt werden.",
+    "Could not reconstruct. Check the share numbers and retry.": "Wiederherstellung fehlgeschlagen. Teilnummern prüfen und erneut versuchen.",
     "Create QR Code": "QR Code erstellen",
     "Create QR code from text?": "QR-Code aus Text erstellen?",
+    "Create m shares (m from 2 to 5) and need n of them to restore (n from 2 to m). For example 2-of-3 or 3-of-5.": "Erstelle m Teile (m von 2 bis 5); n davon zum Wiederherstellen nötig (n von 2 bis m). Zum Beispiel 2 von 3 oder 3 von 5.",
     "Created:": "Erstellt:",
     "Current Tamper Check Code": "Aktueller Tamper Check Code",
     "Custom QR Code": "Benutzerdefinierter Link QR-Code",
@@ -121,11 +124,13 @@
     "Go": "Go",
     "Good entropy": "Gute Entropie",
     "Hardware": "Hardware",
+    "Have you written down all %d shares? They will not be shown again.": "Haben Sie alle %d Teile notiert? Sie werden nicht erneut angezeigt.",
     "Head type": "Kopfart",
     "Hex Public Key:": "Hex öffentlicher Schlüssel:",
     "Hexadecimal": "Hexadezimal",
     "Hide Mnemonics": "Mnemonics ausblenden",
     "High fees!": "Hohe Gebühren!",
+    "I saved all shares": "Ich habe alle Teile notiert",
     "ID": "ID",
     "ID already exists": "ID existiert bereits",
     "If your device display does not work after this change, it will automatically reboot with previous settings after 5 seconds.": "Wenn Ihr Gerätedisplay nach dieser Änderung nicht funktioniert, wird es nach 5 Sekunden automatisch mit den vorherigen Einstellungen neu gestartet.",
@@ -232,6 +237,7 @@
     "Remove firmware files from SD Card?": "Firmware-Dateien von der SD-Karte entfernen?",
     "Res. - Format": "Res. - Format",
     "Restore factory settings and reboot?": "Werkseinstellungen wiederherstellen und neu starten?",
+    "Restore from shares": "Aus Teilen wiederherstellen",
     "Result": "Ergebnis",
     "Return to QR Viewer": "Zurück zum QR-Viewer",
     "Review Again": "Erneut Überprüfen",
@@ -265,6 +271,10 @@
     "Settings stored internally on flash.": "Die Einstellungen werden intern auf Flash gespeichert.",
     "Settings stored on SD card.": "Einstellungen auf SD-Karte gespeichert.",
     "Shannon's entropy:": "Shannons Entropie:",
+    "Share %d of %d": "Teil %d von %d",
+    "Share number (1 to m)": "Teilnummer (1 bis m)",
+    "Shares needed to restore (n), 2 to m": "Zum Wiederherstellen nötige Teile (n), 2 bis m",
+    "Shares you have (n), 2 to m": "Vorhandene Teile (n), 2 bis m",
     "Show Datum": "Datum anzeigen",
     "Shutdown": "Ausschalten",
     "Shutdown Time": "Abschaltzeit",
@@ -284,6 +294,7 @@
     "Some nodes are not hardened:": "Einige Knoten sind nicht gehärtet:",
     "Spend (%d):": "Ausgabe (%d):",
     "Spend:": "Ausgaben:",
+    "Split into %d shares, any %d restore the seed?": "In %d Teile aufteilen; beliebige %d stellen die Seed wieder her?",
     "Standard": "Standard",
     "Standard mode": "Standardmodus",
     "Static": "Statisch",
@@ -308,9 +319,12 @@
     "Text": "Text",
     "Theme": "Thema",
     "Thermal": "Thermisch",
+    "Threshold Split": "Schwellenwert-Aufteilung",
     "To ensure data is unrecoverable use Wipe Device feature": "Um sicherzustellen, dass die Daten nicht wiederhergestellt werden können, verwenden Sie die Funktion 'Gerät löschen'",
     "Toggle Brightness": "Helligkeit umschalten",
     "Tools": "Werkzeuge",
+    "Total shares created (m), 2 to 5": "Erstellte Teile (m), 2 bis 5",
+    "Total shares to create (m), 2 to 5": "Zu erstellende Teile (m), 2 bis 5",
     "Touch Threshold": "Berühre Schwellenwert",
     "Touchscreen": "Touchscreen",
     "Try more?": "Weiter versuchen?",

i18n/translations/es-MX.json

@@ -19,6 +19,7 @@
     "Additional entropy from camera required for %s": "Se requiere entropía adicional de la cámara para %s",
     "Address": "Dirección",
     "Align camera and backup plate properly.": "Alinea la cámara y la placa de respaldo correctamente.",
+    "All shares must have the same number of words.": "Todas las partes deben tener el mismo número de palabras.",
     "Anti-glare mode": "Modo antirreflejo",
     "Appearance": "Apariencia",
     "Are you sure?": "¿Estás seguro?",
@@ -48,8 +49,10 @@
     "Confirm Tamper Check Code": "Confirmar el código de verificación",
     "Convert Datum": "Convertir dato",
     "Could not determine change address.": "No se pudo determinar la dirección de cambio.",
+    "Could not reconstruct. Check the share numbers and retry.": "No se pudo reconstruir. Verifica los números de parte y reintenta.",
     "Create QR Code": "Crear código QR",
     "Create QR code from text?": "¿Crear código QR a partir de texto?",
+    "Create m shares (m from 2 to 5) and need n of them to restore (n from 2 to m). For example 2-of-3 or 3-of-5.": "Crea m partes (m de 2 a 5); necesitas n para restaurar (n de 2 a m). Por ejemplo 2 de 3 o 3 de 5.",
     "Created:": "Creado:",
     "Current Tamper Check Code": "Código de verificación actual",
     "Custom QR Code": "Código QR personalizado",
@@ -121,11 +124,13 @@
     "Go": "Ir",
     "Good entropy": "Buena entropía",
     "Hardware": "Hardware",
+    "Have you written down all %d shares? They will not be shown again.": "¿Anotaste las %d partes? No se mostrarán de nuevo.",
     "Head type": "Tipo de cabezal",
     "Hex Public Key:": "Clave Pública Hexadecimal:",
     "Hexadecimal": "Hexadecimal",
     "Hide Mnemonics": "Ocultar Mnemónicos",
     "High fees!": "¡Tarifas altas!",
+    "I saved all shares": "Guardé todas las partes",
     "ID": "Identificador",
     "ID already exists": "ID ya existe",
     "If your device display does not work after this change, it will automatically reboot with previous settings after 5 seconds.": "Si la pantalla de su dispositivo no funciona después de este cambio, se reiniciará automáticamente con la configuración anterior después de 5 segundos.",
@@ -232,6 +237,7 @@
     "Remove firmware files from SD Card?": "¿Eliminar archivos de firmware de la tarjeta SD?",
     "Res. - Format": "Res. - Formato",
     "Restore factory settings and reboot?": "¿Restablecer a la configuración de fábrica y reiniciar?",
+    "Restore from shares": "Restaurar desde partes",
     "Result": "Resultados",
     "Return to QR Viewer": "Volver al QR",
     "Review Again": "Revisar nuevamente",
@@ -265,6 +271,10 @@
     "Settings stored internally on flash.": "Ajustes almacenados internamente en flash.",
     "Settings stored on SD card.": "Configuración almacenada en la tarjeta SD.",
     "Shannon's entropy:": "Entropía de Shannon:",
+    "Share %d of %d": "Parte %d de %d",
+    "Share number (1 to m)": "Número de parte (1 a m)",
+    "Shares needed to restore (n), 2 to m": "Partes necesarias para restaurar (n), 2 a m",
+    "Shares you have (n), 2 to m": "Partes que tienes (n), 2 a m",
     "Show Datum": "Mostrar dato",
     "Shutdown": "Apagar",
     "Shutdown Time": "Tiempo de Apagado",
@@ -284,6 +294,7 @@
     "Some nodes are not hardened:": "Algunos nodos no están endurecidos:",
     "Spend (%d):": "Gastos (%d):",
     "Spend:": "Gasto:",
+    "Split into %d shares, any %d restore the seed?": "¿Dividir en %d partes; %d cualesquiera restauran la seed?",
     "Standard": "Estándar",
     "Standard mode": "Modo estándar",
     "Static": "Estático",
@@ -308,9 +319,12 @@
     "Text": "Texto",
     "Theme": "Tema",
     "Thermal": "Térmico",
+    "Threshold Split": "División por umbral",
     "To ensure data is unrecoverable use Wipe Device feature": "Para garantizar que los datos no se puedan recuperar, utiliza la función de borrar dispositivo",
     "Toggle Brightness": "Alternar Brillo",
     "Tools": "Herramientas",
+    "Total shares created (m), 2 to 5": "Partes creadas (m), 2 a 5",
+    "Total shares to create (m), 2 to 5": "Partes a crear (m), 2 a 5",
     "Touch Threshold": "Umbral Táctil",
     "Touchscreen": "Pantalla Táctil",
     "Try more?": "¿Intentar con mas?",

i18n/translations/fr-FR.json

@@ -19,6 +19,7 @@
     "Additional entropy from camera required for %s": "Entropie supplémentaire de la caméra requise pour %s",
     "Address": "Adresse",
     "Align camera and backup plate properly.": "Alignez correctement la caméra et plaque de sauvegarde.",
+    "All shares must have the same number of words.": "Toutes les parts doivent avoir le même nombre de mots.",
     "Anti-glare mode": "Mode anti-reflets",
     "Appearance": "Apparence",
     "Are you sure?": "Es-tu sûr ?",
@@ -48,8 +49,10 @@
     "Confirm Tamper Check Code": "Confirmer le code de non compromis",
     "Convert Datum": "Convertir le datum",
     "Could not determine change address.": "Impossible de déterminer l'adresse de monnaie.",
+    "Could not reconstruct. Check the share numbers and retry.": "Reconstruction impossible. Vérifiez les numéros de part et réessayez.",
     "Create QR Code": "Créer un QR Code",
     "Create QR code from text?": "Créer un code QR à partir de texte ?",
+    "Create m shares (m from 2 to 5) and need n of them to restore (n from 2 to m). For example 2-of-3 or 3-of-5.": "Créez m parts (m de 2 à 5) ; il en faut n pour restaurer (n de 2 à m). Par exemple 2 sur 3 ou 3 sur 5.",
     "Created:": "Créé :",
     "Current Tamper Check Code": "Code de non compromis actuel",
     "Custom QR Code": "Code QR personnalisé",
@@ -121,11 +124,13 @@
     "Go": "OK",
     "Good entropy": "Bonne entropie",
     "Hardware": "Matériel",
+    "Have you written down all %d shares? They will not be shown again.": "Avez-vous noté les %d parts ? Elles ne seront plus affichées.",
     "Head type": "Type de tête",
     "Hex Public Key:": "Clé publique hexadécimale :",
     "Hexadecimal": "Hexadécimal",
     "Hide Mnemonics": "Masquer les mnémoniques",
     "High fees!": "Frais élevés !",
+    "I saved all shares": "J'ai noté toutes les parts",
     "ID": "ID",
     "ID already exists": "Id existe déjà",
     "If your device display does not work after this change, it will automatically reboot with previous settings after 5 seconds.": "En cas d'échec d'affichage, l'appareil redémarrera automatiquement après 5 secondes utilisant les paramètres précédents.",
@@ -232,6 +237,7 @@
     "Remove firmware files from SD Card?": "Supprimer les fichiers micrologiciel de la carte SD ?",
     "Res. - Format": "Rés. - Format",
     "Restore factory settings and reboot?": "Restaurer les paramètres d'usine et redémarrer ?",
+    "Restore from shares": "Restaurer depuis les parts",
     "Result": "Résultat",
     "Return to QR Viewer": "Retour au visualiseur QR",
     "Review Again": "Revérifier",
@@ -265,6 +271,10 @@
     "Settings stored internally on flash.": "Paramètres stockés en interne sur flash.",
     "Settings stored on SD card.": "Paramètres stockés sur la carte SD.",
     "Shannon's entropy:": "Entropie de Shannon :",
+    "Share %d of %d": "Part %d sur %d",
+    "Share number (1 to m)": "Numéro de part (1 à m)",
+    "Shares needed to restore (n), 2 to m": "Parts nécessaires pour restaurer (n), 2 à m",
+    "Shares you have (n), 2 to m": "Parts en votre possession (n), 2 à m",
     "Show Datum": "Afficher le datum",
     "Shutdown": "Éteindre",
     "Shutdown Time": "Delai d'Arrêt",
@@ -284,6 +294,7 @@
     "Some nodes are not hardened:": "Certains nœuds ne sont pas durcis :",
     "Spend (%d):": "Dépense (%d) :",
     "Spend:": "Dépense :",
+    "Split into %d shares, any %d restore the seed?": "Diviser en %d parts ; %d suffisent à restaurer la seed ?",
     "Standard": "Standard",
     "Standard mode": "Mode standard",
     "Static": "Statique",
@@ -308,9 +319,12 @@
     "Text": "Texte",
     "Theme": "Thème",
     "Thermal": "Thermique",
+    "Threshold Split": "Partage à seuil",
     "To ensure data is unrecoverable use Wipe Device feature": "Pour assurer que les données soient irrécupérables, utilisez la fonctionnalité 'Effacer l'appareil'",
     "Toggle Brightness": "Ajuster la luminosité",
     "Tools": "Outils",
+    "Total shares created (m), 2 to 5": "Nombre de parts créées (m), 2 à 5",
+    "Total shares to create (m), 2 to 5": "Nombre de parts à créer (m), 2 à 5",
     "Touch Threshold": "Sensibilité",
     "Touchscreen": "Écran Tactile",
     "Try more?": "Réessayer ?",

i18n/translations/ja-JP.json

@@ -19,6 +19,7 @@
     "Additional entropy from camera required for %s": "%sにはカメラからの追加エントロピーが必要です",
     "Address": "アドレス",
     "Align camera and backup plate properly.": "カメラとバックプレートを正しく整列させてください.",
+    "All shares must have the same number of words.": "すべてのシェアは同じ単語数でなければなりません。",
     "Anti-glare mode": "アンチグレアモード",
     "Appearance": "外観",
     "Are you sure?": "よろしいですか?",
@@ -48,8 +49,10 @@
     "Confirm Tamper Check Code": "改ざんチェックコードの確認",
     "Convert Datum": "データムの変換",
     "Could not determine change address.": "変更先住所を特定できませんでした.",
+    "Could not reconstruct. Check the share numbers and retry.": "復元できませんでした。シェア番号を確認して再試行してください。",
     "Create QR Code": "QRコードを作成",
     "Create QR code from text?": "テキストからQRコードを作成しますか?",
+    "Create m shares (m from 2 to 5) and need n of them to restore (n from 2 to m). For example 2-of-3 or 3-of-5.": "m 個のシェアを作成し (m は 2〜5)、復元には n 個が必要です (n は 2〜m)。例: 3 個中 2 個、または 5 個中 3 個。",
     "Created:": "作成されました:",
     "Current Tamper Check Code": "現在の改ざんチェックコード",
     "Custom QR Code": "カスタムQRコード",
@@ -121,11 +124,13 @@
     "Go": "行く",
     "Good entropy": "良いentropy",
     "Hardware": "ハードウェア",
+    "Have you written down all %d shares? They will not be shown again.": "%d 個のシェアをすべて控えましたか？ 再表示されません。",
     "Head type": "ヘッドタイプ",
     "Hex Public Key:": "Hex公開キー:",
     "Hexadecimal": "エクサデシマル",
     "Hide Mnemonics": "Mnemonicsを隠す",
     "High fees!": "高い手数料！",
+    "I saved all shares": "すべてのシェアを保存しました",
     "ID": "ID",
     "ID already exists": "IDはすでに存在します",
     "If your device display does not work after this change, it will automatically reboot with previous settings after 5 seconds.": "この変更後にデバイスのディスプレイが動作しない場合、5秒後に以前の設定で自動的に再起動します.",
@@ -232,6 +237,7 @@
     "Remove firmware files from SD Card?": "SDカードからファームウェアファイルを削除しますか?",
     "Res. - Format": "Res. - フォーマット",
     "Restore factory settings and reboot?": "初期化を復元して再起動しますか?",
+    "Restore from shares": "シェアから復元",
     "Result": "結果",
     "Return to QR Viewer": "QRビューワーに戻る",
     "Review Again": "もう一度確認する",
@@ -265,6 +271,10 @@
     "Settings stored internally on flash.": "設定はフラッシュメモリに内部保存されています.",
     "Settings stored on SD card.": "設定はSDカードに保存されています.",
     "Shannon's entropy:": "シャノンのエントロピー:",
+    "Share %d of %d": "シェア %d / %d",
+    "Share number (1 to m)": "シェア番号 (1〜m)",
+    "Shares needed to restore (n), 2 to m": "復元に必要なシェア数 (n)、2〜m",
+    "Shares you have (n), 2 to m": "手元のシェア数 (n)、2〜m",
     "Show Datum": "データムを表示",
     "Shutdown": "シャットダウン",
     "Shutdown Time": "シャットダウン時間",
@@ -284,6 +294,7 @@
     "Some nodes are not hardened:": "一部のノードは硬化されていません:",
     "Spend (%d):": "支出（%d）:",
     "Spend:": "支出:",
+    "Split into %d shares, any %d restore the seed?": "%d 個のシェアに分割しますか？ 任意の %d 個で seed を復元できます。",
     "Standard": "標準",
     "Standard mode": "標準モード",
     "Static": "静止画",
@@ -308,9 +319,12 @@
     "Text": "テキスト",
     "Theme": "テーマ",
     "Thermal": "サーマル",
+    "Threshold Split": "しきい値分割",
     "To ensure data is unrecoverable use Wipe Device feature": "データが復元不可能であることを確実にするには、デバイス消去機能を使用してください",
     "Toggle Brightness": "明るさを切り替える",
     "Tools": "ツール",
+    "Total shares created (m), 2 to 5": "作成済みシェア数 (m)、2〜5",
+    "Total shares to create (m), 2 to 5": "作成するシェア数 (m)、2〜5",
     "Touch Threshold": "タッチスレッショルド",
     "Touchscreen": "タッチスクリーン",
     "Try more?": "もっと試してみますか?",