Start dimmer experiments

[FabianSperrle]

This is an initial attempt at implementing pump control with the Robotdyn dimmer.
Currently, pump pulses are very irregular in their timing. My expectation was that I would get a constant, low-frequency pump motion.

Leaving this here as a (hopefully useful) basis for discussion, a starting point for other experiments, and to get feedback from everybody.

[JonasB2602]

Integrated 2 new Brewmodes for Dimmer including and excluding scale. During brew pressure PID is calculating and giving the power

#if (BREWMODE == 3) // old Brew MODE
/**

• @brief PreInfusion, Brew Normal
  */
  void brew() {
  if (OnlyPID == 0) {
  checkbrewswitch();
  unsigned long currentMillistemp = millis();

   if (brewcounter > kBrewIdle && brewcounter < kWaitBrewOff) {
       timeBrewed = currentMillistemp - startingTime;
   }
  
   if (brewswitch == LOW && brewcounter > kBrewIdle) {
       // abort function for state machine from every state
       brewcounter = kWaitBrewOff;
   }
  
   if (brewswitch == LOW && movingAverageInitialized == 0) {
       // check if brewswitch was turned off at least once, last time,
       brewswitchWasOFF = true;
   }
  
   totalbrewtime = ((preinfusion * 1000) + (preinfusionpause * 1000) +
       (brewtime * 1000));  // running every cycle, in case changes are done during brew
  
   // state machine for brew
   switch (brewcounter) {
       case 10:  // waiting step for brew switch turning on
           if (brewswitch == HIGH && backflushState == 10 && backflushON == 0 && brewswitchWasOFF) {
               startingTime = millis();
               brewcounter = kPreinfusion;
  
               if (preinfusionpause == 0 || preinfusion == 0) {
                   brewcounter = kPreinfusion;
               }
  
               coldstart = false;  // force reset kaltstart if shot is pulled
           } else {
               backflush();
           }
  
           break;
       case 20:  // preinfusioon
           Serial.println("Preinfusion");
           digitalWrite(PIN_VALVE, relayON);
           digitalWrite(PIN_PUMP, relayON);
           dimmer.setPower(PreinfusionDimmer);
           brewcounter = kBrewRunning;
  
           break;
  
  
       case 40:  // brew running
           Serial.println("Profiling started");
           digitalWrite(PIN_VALVE, relayON);
           digitalWrite(PIN_PUMP, relayON);
           pressurePID.SetMode(AUTOMATIC);
           pressurePID.Compute();
           dimmer.setPower(OutputDimmer);
           brewcounter = kWaitBrew;
  
           break;
  
       case 41:  // waiting time brew
           lastbrewTime = timeBrewed;
  
           if (timeBrewed > totalbrewtime) {
               brewcounter = kBrewFinished;
           }
  
           break;
  
       case 42:  // brew finished
           Serial.println("Brew stopped");
           pressurePID.SetMode(MANUAL);
           dimmer.setPower(0);
           digitalWrite(PIN_VALVE, relayOFF);
           digitalWrite(PIN_PUMP, relayOFF);
           brewcounter = kWaitBrewOff;
           timeBrewed = 0;
  
           break;
  
       case 43:  // waiting for brewswitch off position
           if (brewswitch == LOW) {
               pressurePID.SetMode(MANUAL);
               dimmer.setPower(0);
               digitalWrite(PIN_VALVE, relayOFF);
               digitalWrite(PIN_PUMP, relayOFF);
               
  
               // disarmed button
               currentMillistemp = 0;
               brewDetected = 0;  // rearm brewdetection
               brewcounter = kBrewIdle;
               timeBrewed = 0;
           }
  
           break;
   }
  

  }
  }
  #endif

#if (BREWMODE == 4)
/**

• @brief Scale brew mode
  */
  void brew() {
  if (OnlyPID == 0) {
  checkbrewswitch();
  unsigned long currentMillistemp = millis();

   if (brewswitch == LOW && brewcounter > kBrewIdle) {
       // abort function for state machine from every state
       brewcounter = kWaitBrewOff;
   }
  
   if (brewcounter > kBrewIdle && brewcounter < kWaitBrewOff) {
       timeBrewed = currentMillistemp - startingTime;
       weightBrew = weight - weightPreBrew;
   }
  
   if (brewswitch == LOW && movingAverageInitialized) {
       // check if brewswitch was turned off at least once, last time,
       brewswitchWasOFF = true;
   }
  
   totalBrewTime = ((preinfusion * 1000) + (brewtime * 1000));  
   // running every cycle, in case changes are done during brew
  
   // state machine for brew
   switch (brewcounter) {
       case kBrewIdle:  // waiting step for brew switch turning on
           if (brewswitch == HIGH && backflushState == 10 && backflushON == 0 && brewswitchWasOFF) {
               startingTime = millis();
  
               if (preinfusion == 0) {
                   brewcounter = kBrewRunning;
               } else {
                   brewcounter = kPreinfusion;
               }
  
               coldstart = false;  // force reset kaltstart if shot is pulled
               weightPreBrew = weight;
               pressuresetPoint = 0;
           } else {
               backflush();
           }
  
           break;
  
       case kPreinfusion:  // preinfusioon
           debugPrintln("Preinfusion");
           digitalWrite(PIN_VALVE, relayON);
           digitalWrite(PIN_PUMP, relayON);
           dimmer.setPower(PreinfusionDimmer);
           brewcounter = kWaitPreinfusion;
  
           break;
  
       case kWaitPreinfusion:  // waiting time preinfusion
           if (timeBrewed > (preinfusion * 1000)) {
               brewcounter = kBrewRunning;
           }
  
           break;
           
       case kBrewRunning:  // brew running
           debugPrintln("Brew started");
           digitalWrite(PIN_VALVE, relayON);
           digitalWrite(PIN_PUMP, relayON);
           dimmer.setPower(OutputDimmer);
           pressurePID.Compute();
           brewcounter = kWaitBrew;
           break;
  
       case kWaitBrew:  // waiting time brew
           lastbrewTime = timeBrewed;
           dimmer.setPower(OutputDimmer);
           pressurePID.Compute();
           if (timeBrewed > totalBrewTime || (weightBrew > (weightSetpoint - scaleDelayValue))) {
               brewcounter = kBrewFinished;
           }
  
           if (timeBrewed > totalBrewTime) {
               brewcounter = kBrewFinished;
           }
  
           break;
  
       case kBrewFinished:  // brew finished
           debugPrintln("Brew stopped");
           dimmer.setPower(0);
           digitalWrite(PIN_VALVE, relayOFF);
           digitalWrite(PIN_PUMP, relayOFF);
           brewcounter = kWaitBrewOff;
           timeBrewed = 0;
  
           break;
  
       case kWaitBrewOff:  // waiting for brewswitch off position
           if (brewswitch == LOW) {
               dimmer.setPower(0);
               digitalWrite(PIN_VALVE, relayOFF);
               digitalWrite(PIN_PUMP, relayOFF);
  
               // disarmed button bezugsZeitAlt = bezugsZeit;
               currentMillistemp = 0;
               brewDetected = 0;  // rearm brewdetection
               brewcounter = kBrewIdle;
               timeBrewed = 0;
               pressuresetPoint = 0;
               
           }
  
           weightBrew = weight - weightPreBrew;  // always calculate weight to show on display
  
           break;
   }
  

  }
  }

[fiendie]

Superseded by #576