[pull] main from armbian:main

config/boards/easy-eai-nano.csc

@@ -0,0 +1,12 @@
+# Rockchip RV1126 quad-core Cortex-A7 EASY-EAI Nano
+BOARD_NAME="EASY-EAI Nano"
+BOARD_VENDOR="easy-eai"
+BOARDFAMILY="rockchip-rv1126"
+BOARD_MAINTAINER="hqnicolas"
+INTRODUCED="2026"
+KERNEL_TARGET="vendor"
+KERNEL_TEST_TARGET="vendor"
+BOOT_FDT_FILE="rv1126-nano.dtb"
+BOOT_SOC="rv1126"
+BOOTCONFIG="easy-eai-nano-rv1126_defconfig"
+IMAGE_PARTITION_TABLE="gpt"

config/bootenv/rv1126.txt

@@ -0,0 +1,3 @@
+verbosity=1
+extraargs=coherent_pool=8M cma=8M video=off udev.children-max=1
+bootlogo=false

config/bootscripts/boot-rv1126.cmd

@@ -0,0 +1,84 @@
+# DO NOT EDIT THIS FILE
+#
+# Please edit /boot/armbianEnv.txt to set supported parameters
+#
+
+setenv kernel_addr_r "0x02080000"
+setenv fdt_addr_r "0x08300000"
+setenv load_addr "0x00100000"
+setenv ramdisk_addr_r "0x0a200000"
+setenv ramdisk_arg "-"
+# default values
+setenv rootdev "/dev/mmcblk0p1"
+setenv verbosity "1"
+setenv console "serial"
+setenv bootlogo "false"
+setenv rootfstype "ext4"
+setenv docker_optimizations "off"
+setenv earlycon "off"
+
+test -n "${distro_bootpart}" || setenv distro_bootpart 1
+test -n "${fdtfile}" || setenv fdtfile "rv1126-nano.dtb"
+
+echo "Boot script loaded from ${devtype} ${devnum}:${distro_bootpart}"
+
+if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}armbianEnv.txt; then
+	load ${devtype} ${devnum}:${distro_bootpart} ${load_addr} ${prefix}armbianEnv.txt
+	env import -t ${load_addr} ${filesize}
+fi
+
+if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
+
+if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
+if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS2,1500000n8 ${consoleargs}"; fi
+if test "${earlycon}" = "on"; then setenv consoleargs "earlycon=uart8250,mmio32,0xff570000 ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
+
+# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
+if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:${distro_bootpart} partuuid; fi
+if test "${rootdev}" = "/dev/mmcblk0p1"; then setenv rootdev "PARTUUID=${partuuid}"; fi
+
+setenv bootargs "root=${rootdev} rootwait rw rootfstype=${rootfstype} ${consoleargs} no_console_suspend consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
+
+if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory"; fi
+echo "Final bootargs: ${bootargs}"
+
+echo "Loading initramfs to ${ramdisk_addr_r}..."
+if load ${devtype} ${devnum}:${distro_bootpart} ${ramdisk_addr_r} ${prefix}uInitrd; then
+	setenv ramdisk_arg "${ramdisk_addr_r}"
+	echo "Loaded initramfs (${filesize} bytes)"
+else
+	echo "WARNING: failed to load ${prefix}uInitrd, booting without initramfs"
+fi
+
+echo "Loading kernel zImage to ${kernel_addr_r}..."
+if load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} ${prefix}zImage; then
+	echo "Loaded kernel zImage (${filesize} bytes)"
+else
+	echo "ERROR: failed to load ${prefix}zImage, stopping boot"
+	exit
+fi
+
+echo "Loading DTB ${prefix}dtb/${fdtfile} to ${fdt_addr_r}..."
+if load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}dtb/${fdtfile}; then
+	echo "Loaded DTB ${prefix}dtb/${fdtfile}"
+else
+	echo "WARNING: failed to load ${prefix}dtb/${fdtfile}, trying rv1126-evb-ddr3-v13.dtb"
+	if load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}dtb/rv1126-evb-ddr3-v13.dtb; then
+		setenv fdtfile "rv1126-evb-ddr3-v13.dtb"
+		echo "WARNING: using fallback DTB ${fdtfile}"
+	else
+		echo "ERROR: failed to load DTB, stopping boot"
+		exit
+	fi
+fi
+
+echo "Booting kernel from ${kernel_addr_r} with initramfs ${ramdisk_arg} and DTB ${fdt_addr_r}..."
+bootz ${kernel_addr_r} ${ramdisk_arg} ${fdt_addr_r}
+
+# Recompile with:
+# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr

config/kernel/linux-qrb2210-edge.config

@@ -1,4 +1,4 @@
-# Armbian defconfig generated with 7.0
+# Armbian defconfig generated with 7.1
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -56,7 +56,6 @@ CONFIG_ARCH_HISI=y
 CONFIG_ARCH_KEEMBAY=y
 CONFIG_ARCH_MEDIATEK=y
 CONFIG_ARCH_MESON=y
-CONFIG_ARCH_SPARX5=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_ARCH_NXP=y
 CONFIG_ARCH_LAYERSCAPE=y
@@ -138,7 +137,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_ESP=m
-CONFIG_IPV6=m
 CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=m
 CONFIG_NETFILTER_NETLINK_HOOK=m
@@ -295,7 +293,7 @@ CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
 CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE=m
+CONFIG_BRIDGE=y
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_NET_DSA=m
 CONFIG_NET_DSA_TAG_OCELOT=m
@@ -343,10 +341,7 @@ CONFIG_BT_NXPUART=m
 CONFIG_CFG80211=m
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
-CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS is not set
 CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=y
 CONFIG_RFKILL_GPIO=m
@@ -508,6 +503,7 @@ CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
 # CONFIG_WLAN_VENDOR_ADMTEK is not set
+CONFIG_ATH9K_HTC=m
 CONFIG_ATH10K=m
 CONFIG_ATH10K_SNOC=m
 # CONFIG_WLAN_VENDOR_ATMEL is not set
@@ -1192,6 +1188,10 @@ CONFIG_USB_RENESAS_USBHS_HCD=m
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=y
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_HOST=m
+CONFIG_USBIP_VUDC=m
 CONFIG_USB_CDNS_SUPPORT=m
 CONFIG_USB_CDNS3=m
 CONFIG_USB_CDNS3_GADGET=y
@@ -1253,7 +1253,6 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_OF_DWCMSHC=y
-CONFIG_MMC_SDHCI_OF_SPARX5=y
 CONFIG_MMC_SDHCI_CADENCE=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
@@ -1546,11 +1545,6 @@ CONFIG_QCOM_APR=m
 CONFIG_QCOM_ICC_BWMON=m
 CONFIG_QCOM_PBS=m
 CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ARCH_TEGRA_132_SOC=y
-CONFIG_ARCH_TEGRA_210_SOC=y
-CONFIG_ARCH_TEGRA_186_SOC=y
-CONFIG_ARCH_TEGRA_194_SOC=y
-CONFIG_ARCH_TEGRA_234_SOC=y
 CONFIG_TI_PRUSS=m
 CONFIG_OWL_PM_DOMAINS=y
 CONFIG_RASPBERRYPI_POWER=y
@@ -1622,10 +1616,10 @@ CONFIG_RESET_QCOM_AOSS=y
 CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_RZG2L_USBPHY_CTRL=y
 CONFIG_RESET_TI_SCI=y
-CONFIG_PHY_SNPS_EUSB2=m
-CONFIG_PHY_XGENE=y
 CONFIG_PHY_CAN_TRANSCEIVER=m
 CONFIG_PHY_NXP_PTN3222=m
+CONFIG_PHY_SNPS_EUSB2=m
+CONFIG_PHY_XGENE=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_CADENCE_TORRENT=m
 CONFIG_PHY_CADENCE_DPHY=m
@@ -1792,11 +1786,9 @@ CONFIG_CRYPTO_USER=y
 CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_CHACHA20=m
 CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_ZSTD=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_SM3_ARM64_CE=m
 CONFIG_CRYPTO_AES_ARM64_BS=m
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_DEV_SUN8I_CE=m
@@ -1814,10 +1806,6 @@ CONFIG_CRYPTO_DEV_SA2UL=m
 CONFIG_DMA_RESTRICTED_POOL=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_PRINTK_TIME=y
-CONFIG_USBIP_CORE=m
-CONFIG_USBIP_VHCI_HCD=m
-CONFIG_USBIP_HOST=m
-CONFIG_USBIP_VUDC=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_MEMORY_INIT=y