add README.md on key provisioner

.gitignore

@@ -0,0 +1,17 @@
+*.tmp
+*.uvguix.*
+*.o
+*.d
+*.crf
+*.iex
+*.dep
+*.axf
+*.htm
+*.lnp
+*.hex
+*.map
+*.Bak
+*.scvd
+*.mk
+*.elf
+*/Debug/*

Documentation/README.md

@@ -0,0 +1,10 @@
+## Welcome to Your Application Development Guide 
+
+> HTMicron has provided comprehensive documentation to guide you through the development process, saving you valuable time.
+
+**Let's get started**
+
+1. **Begin with the Breakout Board**: If you have a breakout board for your application, you can start with the [Breakout board doc](https://github.com/htmicron/htlrbl32l/blob/SDK/Documentation/HTLRBL32L%20Breakout%20Board.pdf).
+2. **Flashing the Firmware**: Once your basic connections are in place,  it's time to interact with your device using the [Firmware flashing doc](https://github.com/htmicron/htlrbl32l/blob/SDK/Documentation/Firmware%20Flashing.pdf).
+3. **Configuring your devices**: To configure both your end device and gateway, explore the detailed instructions provided in the [Backend Configuration](https://github.com/htmicron/htlrbl32l/blob/SDK/Documentation/Backend%20Configuration.pdf) and [Gateway, network server and application configuration](https://github.com/htmicron/htlrbl32l/blob/SDK/Documentation/Gateway%2C%20Network%20Server%2C%20and%20Application%20Configuration.pdf).
+4. **Exploring Applications**:With basic configurations in place, you can choose a example of application from the [Applications folder](https://github.com/htmicron/htlrbl32l/tree/SDK/Examples/Applications). Learn how to clone a project with the easy-to-follow steps outlined in the [Clone a project](https://github.com/htmicron/htlrbl32l/blob/SDK/Documentation/Cloning%20a%20Project.pdf)

Examples/Applications/FreeRTOS-LoRaWAN/Inc/FreeRTOSConfig.h

@@ -0,0 +1,113 @@
+/*
+ * FreeRTOS Kernel V10.1.1
+ * Copyright (C) 2018 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html
+ *----------------------------------------------------------*/
+
+
+#define SYSCLK_FREQ 	64000000            /* System clock frequency */
+
+
+#define configUSE_PREEMPTION			1
+#define configUSE_IDLE_HOOK				0
+#define configUSE_TICK_HOOK				1
+#define configCPU_CLOCK_HZ				( SYSCLK_FREQ )
+#define configTICK_RATE_HZ				( ( TickType_t ) 1000 )
+#define configMAX_PRIORITIES			( 5 )
+#define configMINIMAL_STACK_SIZE		( ( unsigned short ) 80 )
+#define configTOTAL_HEAP_SIZE			( ( size_t ) ( 8000 ) )
+#define configMAX_TASK_NAME_LEN			( 5 )
+#define configUSE_TRACE_FACILITY		1
+#define configUSE_16_BIT_TICKS			0
+#define configIDLE_SHOULD_YIELD			1
+#define configUSE_MUTEXES				1
+#define configQUEUE_REGISTRY_SIZE		8
+#define configCHECK_FOR_STACK_OVERFLOW	2
+#define configUSE_RECURSIVE_MUTEXES		1
+#define configUSE_MALLOC_FAILED_HOOK	1
+#define configUSE_APPLICATION_TASK_TAG	0
+#define configUSE_COUNTING_SEMAPHORES	1
+#define configGENERATE_RUN_TIME_STATS	0
+#define configUSE_TICKLESS_IDLE         1
+#define configEXPECTED_IDLE_TIME_BEFORE_SLEEP  100 // 2 ms
+//#define configSUPPORT_STATIC_ALLOCATION 1
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 			0
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Software timer definitions. */
+#define configUSE_TIMERS				1
+#define configTIMER_TASK_PRIORITY		( 2 )
+#define configTIMER_QUEUE_LENGTH		5
+#define configTIMER_TASK_STACK_DEPTH	( 80 )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+#define INCLUDE_vTaskPrioritySet		1
+#define INCLUDE_uxTaskPriorityGet		1
+#define INCLUDE_vTaskDelete				1
+#define INCLUDE_vTaskCleanUpResources	1
+#define INCLUDE_vTaskSuspend			1
+#define INCLUDE_vTaskDelayUntil			1
+#define INCLUDE_vTaskDelay				1
+
+/* Normal assert() semantics without relying on the provision of an assert.h
+header file. */
+#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); }
+
+/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
+standard names - or at least those used in the unmodified vector table. */
+#define vPortSVCHandler SVC_IRQHandler
+#define xPortPendSVHandler PendSV_IRQHandler
+#define xPortSysTickHandler SysTick_IRQHandler
+
+/*-----------------------------------------------------------*/
+
+#ifdef __GNUC__
+
+#include "portmacro.h"
+/* Tickless idle/low power functionality. */
+extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
+#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
+#endif
+
+#endif /* FREERTOS_CONFIG_H */
+