u-blox GNSS Receiver Board

designs/u-blox-MAX-F10S-00B/README.md

@@ -0,0 +1 @@
+Breakout board for the u-blox MAX-F10S-00B

designs/u-blox-MAX-F10S-00B/hardware/_restore_backup_2026-05-14T21-09-39-204/u-blox-MAX-F10S-00B.kicad_dru

@@ -0,0 +1,37 @@
+(version 1)
+
+(rule "Minimum Track Width"
+	(constraint connection_width (min 0.09mm)))
+
+(rule "Track to Track Clearance"
+    (constraint clearance (min 0.09mm))
+    (condition "A.Type == 'Track' && B.Type == 'Track'"))
+
+(rule "Pad to Track Clearance"
+    (constraint clearance (min 0.1mm))
+    (condition "A.Type == 'Pad' && B.Type == 'Track'"))
+
+(rule "Clearance between Pads of Different Nets"
+    (constraint clearance (min 0.15mm))
+    (condition "A.Type == 'Pad' && B.Type == 'Pad' && A.Net != B.Net"))
+
+(rule "Via Hole to Track Clearance"
+    (constraint hole_clearance (min 0.2mm))
+    (condition "A.Type == 'Via' && B.Type == 'Track'"))
+
+(rule "Distance between Vias of Different Nets"
+    (constraint hole_to_hole (min 0.5mm))
+    (condition "A.Type == 'Via' && B.Type == 'Via' && A.Net != B.Net"))
+
+(rule "Distance between Vias of Same Nets"
+    (constraint hole_to_hole (min 0.254mm))
+    (condition "A.Type == 'Via' && B.Type == 'Via' && A.Net == B.Net"))
+
+(rule "Minimum Via Hole Size"
+	(constraint hole_size (min 0.15mm)))
+
+(rule "Minimum Via Diameter"
+	(constraint via_diameter (min 0.25mm)))
+
+(rule "Minimum Via Annular Ring"
+	(constraint annular_width (min 0.13mm)))