Move to Radiolib

include/include.h

@@ -36,8 +36,7 @@
 
 #include "TimeLib.h"
 
-#include "lmic.h"
-#include "hal/hal.h"
+#include <RadioLib.h>
 
 #ifdef USE_LED
 #include "EasyLed.h"
@@ -60,11 +59,11 @@
 #include "power.h"
 #include "gps.h"
 #include "utils.h"
-#include "lmic-node.h"
+#include "radiolib-node.h"
 #include "http-helpers.h"
 #include "power.h"
 #include "parsers.h"
-#include "lmic-helpers.h"
+#include "radiolib-helpers.h"
 #include "mqtt.h"
 
 #endif

include/lmic-helpers.h → include/radiolib-helpers.h

@@ -1,5 +1,5 @@
-#ifndef LMIC_HELPERS_H_
-#define LMIC_HELPERS_H_
+#ifndef RADIOLIB_HELPERS_H_
+#define RADIOLIB_HELPERS_H_
 
 #include "include.h"
 
@@ -21,4 +21,4 @@ void handleDownlinkMsgTask(void *parameter);
 
 extern PicoMQTT::Server mqtt;
 
-#endif // LMIC_HELPERS_H_
+#endif // RADIOLIB_HELPERS_H_

include/radiolib-node.h

@@ -0,0 +1,127 @@
+/*******************************************************************************
+ *
+ *  File:         radiolib-node.h
+ *
+ *  Function:     RadioLib-node main header file.
+ *
+ *  Copyright:    Copyright (c) 2024 LMIC Node Rebuild Project
+ *
+ *                Permission is hereby granted, free of charge, to anyone
+ *                obtaining a copy of this document and accompanying files to do,
+ *                whatever they want with them without any restriction, including,
+ *                but not limited to, copying, modification and redistribution.
+ *                The above copyright notice and this permission notice shall be
+ *                included in all copies or substantial portions of the Software.
+ *
+ *                THE SOFTWARE IS PROVIDED "AS IS", WITHOUT ANY WARRANTY.
+ *
+ *  License:      MIT License. See accompanying LICENSE file.
+ *
+ *  Author:       LMIC Node Rebuild Project
+ *
+ ******************************************************************************/
+
+#ifndef RADIOLIB_NODE_H_
+#define RADIOLIB_NODE_H_
+
+#include "include.h"
+
+// Default LoRaWAN parameters
+const uint8_t DefaultABPDataRate = 5; // SF7BW125 equivalent
+const int8_t DefaultABPTxPower = 14;
+
+extern bool boardInit(InitType initType);
+
+#ifdef USE_SERIAL
+extern HardwareSerial &serial;
+#endif
+
+#ifdef USE_DISPLAY
+// Create U8x8 instance for SSD1306 OLED display (no reset) using hardware I2C.
+extern U8X8_SSD1306_128X64_NONAME_HW_I2C display;
+#endif
+
+// Forward declarations
+extern TaskHandle_t RadioLibTask;
+void radioLibTask(void *);
+
+void processDownlink(uint32_t timestamp, uint8_t fPort, uint8_t *data, uint8_t dataLength);
+void onRadioLibEvent(uint16_t eventType, void* eventData);
+void initRadioLib(void);
+int16_t getSnrTenfold(void);
+int16_t getRssi(void);
+int16_t scheduleUplink(uint8_t fPort, uint8_t *data, uint8_t dataLength, bool confirmed);
+extern bool joined;
+
+#ifndef DO_WORK_INTERVAL_SECONDS     // Should be set in platformio.ini
+#define DO_WORK_INTERVAL_SECONDS 300 // Default 5 minutes if not set
+#endif
+
+#define TIMESTAMP_WIDTH 12 // Number of columns to display eventtime (zero-padded)
+#define MESSAGE_INDENT TIMESTAMP_WIDTH + 3
+
+#if !defined(ABP_ACTIVATION) && !defined(OTAA_ACTIVATION)
+#define OTAA_ACTIVATION
+#endif
+
+enum class ActivationMode
+{
+    OTAA,
+    ABP
+};
+#ifdef OTAA_ACTIVATION
+const ActivationMode activationMode = ActivationMode::OTAA;
+#else
+const ActivationMode activationMode = ActivationMode::ABP;
+#endif
+
+#if defined(ABP_ACTIVATION) && defined(OTAA_ACTIVATION)
+#error Only one of ABP_ACTIVATION and OTAA_ACTIVATION can be defined.
+#endif
+
+#if defined(ABP_ACTIVATION) && defined(ABP_DEVICEID)
+const char deviceId[] = ABP_DEVICEID;
+#elif defined(DEVICEID)
+const char deviceId[] = DEVICEID;
+#else
+const char deviceId[] = DEVICEID_DEFAULT;
+#endif
+
+// Allow WAITFOR_SERIAL_SECONDS to be defined in platformio.ini.
+// If used it shall be defined in the [common] section.
+// The common setting will only be used for boards that have
+// USE_SERIAL defined and WAITFOR_SERIAL_SECONDS > 0 defined.
+#ifndef WAITFOR_SERIAL_SECONDS_DEFAULT
+#define WAITFOR_SERIAL_SECONDS_DEFAULT 10
+#endif
+#ifndef WAITFOR_SERIAL_SECONDS
+#define WAITFOR_SERIAL_SECONDS WAITFOR_SERIAL_SECONDS_DEFAULT
+#endif
+
+// Constants for display layout (from original LMIC implementation)
+#define COL_0 0
+#define FRMCNTRS_ROW 6
+#define MONITOR_SPEED 115200
+#define WAITFOR_SERIAL_S WAITFOR_SERIAL_SECONDS
+
+// Device ID defaults
+#ifndef DEVICEID_DEFAULT
+#define DEVICEID_DEFAULT "RadioLib-Node"
+#endif
+
+// RadioLib specific declarations
+extern Module* radio;
+extern LoRaWANNode* node;
+
+// RadioLib event types
+#define RADIOLIB_EVENT_JOIN_ACCEPT 0x01
+#define RADIOLIB_EVENT_JOIN_FAILED 0x02
+#define RADIOLIB_EVENT_UPLINK_COMPLETE 0x03
+#define RADIOLIB_EVENT_DOWNLINK_RECEIVED 0x04
+#define RADIOLIB_EVENT_LINK_CHECK 0x05
+
+// RadioLib error handling
+typedef int16_t radiolib_error_t;
+#define RADIOLIB_ERR_NONE 0
+
+#endif // RADIOLIB_NODE_H_