Gas Leak Detection System 🚨

This project implements a Gas Leak Detection System using an ESP32 microcontroller, an OLED display, a gas sensor (e.g., MQ-2), a buzzer, and Blynk for remote monitoring. When the gas level exceeds a certain threshold, the system triggers an alert using a buzzer and sends an SMS through the Notify.lk API. Additionally, the gas level is monitored and displayed in real-time using the Blynk app.

Features:

• Monitors gas levels using an analog gas sensor.
• Displays gas level and status on an OLED screen.
• Sends SMS alert when a gas leak is detected.
• Real-time monitoring via the Blynk app 📱.
• Buzzer activation for gas leak warning ⚠️.

Requirements:

• ESP32 board
• OLED Display (SSD1306)
• Gas sensor (MQ-2)
• Buzzer
• Blynk account

Libraries Used:

• Adafruit_SSD1306: For controlling the OLED display.
• BlynkSimpleEsp32: For connecting the ESP32 to the Blynk app.
• WiFi: For Wi-Fi connectivity.
• HTTPClient: For sending HTTP requests to the Notify.lk API.

Setup:

1. Clone the repository to your local machine.

2. Install the required libraries:

   • Adafruit_SSD1306
   • BlynkSimpleEsp32
   • WiFi
   • HTTPClient

3. Update the code:

   • Replace the Wi-Fi credentials (ssid and pass).
   • Replace the Blynk authentication token (auth).
   • Replace Notify.lk API credentials (notifylk_user_id, notifylk_api_key, notifylk_sender_id, recipient_number).

4. Hardware setup:

   • Connect the gas sensor (e.g., MQ-2) to the sensor pin (GPIO 34 on ESP32).
   • Connect the buzzer to the buzzer pin (GPIO 2 on ESP32).
   • Connect the OLED display (SSD1306) to the I2C pins (default SDA and SCL on ESP32).

5. Upload the code to the ESP32.

6. Open the Blynk app to monitor gas levels in real-time 📲.