Smart relay for Apple Home

In this repository, you will find firmware and a schematic to build your own smart relay for your Apple Home. Should you have any questions, please do not hesitate to contact me at gully.horror0w@icloud.com.

Используемые компоненты

• Arduino relay module - 1 pcs.
• ESP32C3FN4 Super Mini - 1 pcs.
• 5V 1A power supply - 1 pcs.
• Capacitor 3000mF x 6.3V - 1pcs.
• Transistor 2N2904 - 1 pcs.
• Resistor 1K - 1 pcs.
• Reistor 220 Ohm - 1 pcs.

Required Arduino libraries

• esp32 by Espressif Systems (board) 3.3.7
• HomeSpan 2.1.7

Arduino IDE settings

• Board: ESP32C3 Dev BModule
• ESP CDC On Boot: Enabled
• CPU Frequency: 80MHz (WiFi)
• Core Debug Level: None
• Erase All Flash Before Sketch Upload: Disabled
• Flash frequency: 80Mhz
• Flash Mode: QIO
• Flash Size: 4MB (32Mb)
• JTAG Adapter: Disabled
• Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)
• Upload Speed: 921600
• Zigbee Mode: Disabled
• Programmer: Esptool

Support the author

If you like what I am doing, you can support me using one of the links below:

BuyMeACoffee: https://buymeacoffee.com/dronetales
Boosty: https://boosty.to/drone_tales/donate

BTC: bitcoin:1A1WM3CJzdyEB1P9SzTbkzx38duJD6kau
BCH: bitcoincash:qre7s8cnkwx24xpzvvfmqzx6ex0ysmq5vuah42q6yz
ETH: 0xf780b3B7DbE2FC74b5F156cBBE51F67eDeAd8F9a