PD_CALIB_DETECTED_INTENSITY example

[rowlesmr]

from #124

I need to add an example of how it is used with an actual diffractogram, and I'm not sure how to reference the calibration

From the current example:

data_calibration_block
   loop_
   _pd_calib_detected_intensity.detector_id
   _pd_calib_detected_intensity.detector_response
   _pd_calib_detected_intensity.diffractogram_id
   _pd_calib_detected_intensity.phase_id
   _pd_calib_detected_intensity.special_details
   1_4913c6ed   1       . . 'Scanned through direct beam.'
   2_4913c6ed   0.973   . . 'Scanned through direct beam.'
   3_4913c6ed   0.997   . . 'Scanned through direct beam.'
   4_4913c6ed   1.039   . . 'Scanned through direct beam.'
   # ...

data_diffractogram_to_be_calibrated
   # does anything go here to link to the calibration?
   loop_
   _pd_meas.detector_id  # I'm a position-sensitive detector. Angle calibration comes later...
   _pd_meas.intensity_total
   1_4913c6ed   1234.25       
   2_4913c6ed   1354.36
   3_4913c6ed   1356.78 
   4_4913c6ed   1654.78
   # ... 

data_another_diffractogram_to_be_calibrated
   # does anything go here to link to the calibration?
   loop_
   _pd_meas.detector_id  # I'm a position-sensitive detector. Angle calibration comes later...
   _pd_meas.intensity_total
   1_4913c6ed   2234.25       
   2_4913c6ed   2354.36
   3_4913c6ed   2356.78 
   4_4913c6ed   2654.78
   # ... 

[rowlesmr]

Don't look at this one. Need to rejig it along the lines of PD_CALIB_XCOORD

[vaitkus]

You might want to redesignate such PRs as drafts [1] for the time of being.

[1] https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/changing-the-stage-of-a-pull-request

[rowlesmr]

Ta! was wondering how to flag it without closing it

[rowlesmr]

move to another PR #238