ApolloAutomation · cloudcannon · May 19, 2026 · May 19, 2026 · May 19, 2026 · May 19, 2026
diff --git a/docs/assets/esphome-starter-kit-disassembly-final.gif b/docs/assets/esphome-starter-kit-disassembly-final.gif
diff --git a/docs/assets/esphome-starter-kit-fpc-cable-1.gif b/docs/assets/esphome-starter-kit-fpc-cable-1.gif
diff --git a/docs/assets/esphome-starter-kit-fpc-cable.gif b/docs/assets/esphome-starter-kit-fpc-cable.gif
diff --git a/docs/products/ESPHome-Starter-Kit/setup/getting-started-advanced.md b/docs/products/ESPHome-Starter-Kit/setup/getting-started-advanced.md
@@ -18,7 +18,7 @@ The ESP32-C6 is the main board in your kit. It is the small module with the USB-
 
 For your first project, we will attach the LED & Buzzer module (ten RGB LEDs and a piezo buzzer) to the ESP32-C6 module of your device using the FPC connector and ribbon cable. You can connect to the top or bottom FPC connector - in this example we will connect it to the top!
 
-&nbsp;
+![](../../../assets/esphome-starter-kit-fpc-cable-1.gif)
 
 ### Connect the C6 to your computer
 

diff --git a/docs/products/ESPHome-Starter-Kit/start-here.md b/docs/products/ESPHome-Starter-Kit/start-here.md
@@ -30,10 +30,7 @@ Each module is connected to the panel by small breakaway tabs. Follow the steps
 1. Hold the panel flat on a table with one hand on the module you want to remove.
 2. Gently flex the panel along the tab line until the tab snaps cleanly.
 
-<video autoplay="" loop="" muted="" playsinline="" width="100%">
-  <source src="/assets/ESPHome_Starter_Kit_Break_Apart_Modules.mp4" type="video/mp4" /><p></p><p></p><p></p><p></p><p></p><p></p><p></p><p></p><p></p><p></p>
-  Your browser does not support embedded video.
-</video>
+![](../../assets/esphome-starter-kit-disassembly-final.gif)
 
 ## Meet the modules
-Original file line number
+Diff line change
@@ Expand Up @@
     For your first project, we will attach the LED & Buzzer module (ten RGB LEDs and a piezo buzzer) to the ESP32-C6 module of your device using the FPC connector and ribbon cable. You can connect to the top or bottom FPC connector - in this example we will connect it to the top!
-    &nbsp;
+    ![](../../../assets/esphome-starter-kit-fpc-cable-1.gif)
     ### Connect the C6 to your computer
@@ Expand Down @@