diff --git a/boards/SparkFun-MicroMod-RP2040-Processor/README.md b/boards/SparkFun-MicroMod-RP2040-Processor/README.md
new file mode 100644
index 00000000..c4e840ed
--- /dev/null
+++ b/boards/SparkFun-MicroMod-RP2040-Processor/README.md
@@ -0,0 +1,15 @@
+# SparkFun MicroMod RP2040 Processor
+
+Recreation of the [SparkFun MicroMod RP2040 Processor](https://www.sparkfun.com/products/17720) in tscircuit.
+
+## Features
+- RP2040 dual-core ARM Cortex-M0+ microcontroller
+- 128Mbit (16MB) external QSPI flash
+- MicroMod M.2 edge connector interface
+- Status LED
+- 12MHz crystal oscillator
+
+## Reference
+- [Product Page](https://www.sparkfun.com/sparkfun-micromod-rp2040-processor.html)
+- [Schematic](https://cdn.sparkfun.com/assets/1/8/3/5/8/MicroMod-RP2040-ProcessorBoard_Schematic.pdf)
+- [GitHub Hardware Repo](https://github.com/sparkfun/MicroMod_Processor-RP2040)
diff --git a/boards/SparkFun-MicroMod-RP2040-Processor/RP2040.tsx b/boards/SparkFun-MicroMod-RP2040-Processor/RP2040.tsx
new file mode 100644
index 00000000..e297a171
--- /dev/null
+++ b/boards/SparkFun-MicroMod-RP2040-Processor/RP2040.tsx
@@ -0,0 +1,147 @@
+import type { ChipProps } from "@tscircuit/props"
+
+const pinLabels = {
+  pin1: ["IOVDD1"],
+  pin2: ["GPIO0"],
+  pin3: ["GPIO1"],
+  pin4: ["GPIO2"],
+  pin5: ["GPIO3"],
+  pin6: ["GPIO4"],
+  pin7: ["GPIO5"],
+  pin8: ["GPIO6"],
+  pin9: ["GPIO7"],
+  pin10: ["IOVDD2"],
+  pin11: ["GPIO8"],
+  pin12: ["GPIO9"],
+  pin13: ["GPIO10"],
+  pin14: ["GPIO11"],
+  pin15: ["GPIO12"],
+  pin16: ["GPIO13"],
+  pin17: ["GPIO14"],
+  pin18: ["GPIO15"],
+  pin19: ["TESTEN"],
+  pin20: ["XIN"],
+  pin21: ["XOUT"],
+  pin22: ["IOVDD3"],
+  pin23: ["DVDD1"],
+  pin24: ["SWCLK"],
+  pin25: ["SWD"],
+  pin26: ["RUN"],
+  pin27: ["GPIO16"],
+  pin28: ["GPIO17"],
+  pin29: ["GPIO18"],
+  pin30: ["GPIO19"],
+  pin31: ["GPIO20"],
+  pin32: ["GPIO21"],
+  pin33: ["IOVDD4"],
+  pin34: ["GPIO22"],
+  pin35: ["GPIO23"],
+  pin36: ["GPIO24"],
+  pin37: ["GPIO25"],
+  pin38: ["GPIO26_ADC0"],
+  pin39: ["GPIO27_ADC1"],
+  pin40: ["GPIO28_ADC2"],
+  pin41: ["GPIO29_ADC3"],
+  pin42: ["IOVDD5"],
+  pin43: ["ADC_AVDD"],
+  pin44: ["VREG_VIN"],
+  pin45: ["VREG_VOUT"],
+  pin46: ["USB_DM"],
+  pin47: ["USB_DP"],
+  pin48: ["USB_VDD"],
+  pin49: ["IOVDD6"],
+  pin50: ["DVDD2"],
+  pin51: ["QSPI_SCLK"],
+  pin52: ["QSPI_SS"],
+  pin53: ["QSPI_SD0"],
+  pin54: ["QSPI_SD1"],
+  pin55: ["QSPI_SD2"],
+  pin56: ["QSPI_SD3"],
+  pin57: ["GND"],
+} as const
+
+export const RP2040 = (props: ChipProps<typeof pinLabels>) => {
+  return (
+    <chip
+      pinLabels={pinLabels}
+      schWidth={4}
+      schHeight={8}
+      manufacturerPartNumber="RP2040"
+      supplierPartNumbers={{
+        jlcpcb: ["C2040"],
+      }}
+      footprint={
+        <footprint>
+          {/* QFN-56 7x7mm package - pads around perimeter */}
+          {/* Bottom side - pins 1-14 */}
+          <smtpad portHints={["pin1"]} pcbX="-3.25mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin2"]} pcbX="-2.85mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin3"]} pcbX="-2.45mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin4"]} pcbX="-2.05mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin5"]} pcbX="-1.65mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin6"]} pcbX="-1.25mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin7"]} pcbX="-0.85mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin8"]} pcbX="-0.45mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin9"]} pcbX="-0.05mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin10"]} pcbX="0.35mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin11"]} pcbX="0.75mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin12"]} pcbX="1.15mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin13"]} pcbX="1.55mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin14"]} pcbX="1.95mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          
+          {/* Right side - pins 15-28 */}
+          <smtpad portHints={["pin15"]} pcbX="3.25mm" pcbY="-2.2mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin16"]} pcbX="3.25mm" pcbY="-1.8mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin17"]} pcbX="3.25mm" pcbY="-1.4mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin18"]} pcbX="3.25mm" pcbY="-1.0mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin19"]} pcbX="3.25mm" pcbY="-0.6mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin20"]} pcbX="3.25mm" pcbY="-0.2mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin21"]} pcbX="3.25mm" pcbY="0.2mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin22"]} pcbX="3.25mm" pcbY="0.6mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin23"]} pcbX="3.25mm" pcbY="1.0mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin24"]} pcbX="3.25mm" pcbY="1.4mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin25"]} pcbX="3.25mm" pcbY="1.8mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin26"]} pcbX="3.25mm" pcbY="2.2mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin27"]} pcbX="2.35mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin28"]} pcbX="1.95mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          
+          {/* Top side - pins 29-42 */}
+          <smtpad portHints={["pin29"]} pcbX="1.55mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin30"]} pcbX="1.15mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin31"]} pcbX="0.75mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin32"]} pcbX="0.35mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin33"]} pcbX="-0.05mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin34"]} pcbX="-0.45mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin35"]} pcbX="-0.85mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin36"]} pcbX="-1.25mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin37"]} pcbX="-1.65mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin38"]} pcbX="-2.05mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin39"]} pcbX="-2.45mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin40"]} pcbX="-2.85mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin41"]} pcbX="-3.25mm" pcbY="2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin42"]} pcbX="-3.25mm" pcbY="2.2mm" width="0.7mm" height="0.2mm" shape="rect" />
+          
+          {/* Left side - pins 43-56 */}
+          <smtpad portHints={["pin43"]} pcbX="-3.25mm" pcbY="1.8mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin44"]} pcbX="-3.25mm" pcbY="1.4mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin45"]} pcbX="-3.25mm" pcbY="1.0mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin46"]} pcbX="-3.25mm" pcbY="0.6mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin47"]} pcbX="-3.25mm" pcbY="0.2mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin48"]} pcbX="-3.25mm" pcbY="-0.2mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin49"]} pcbX="-3.25mm" pcbY="-0.6mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin50"]} pcbX="-3.25mm" pcbY="-1.0mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin51"]} pcbX="-3.25mm" pcbY="-1.4mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin52"]} pcbX="-3.25mm" pcbY="-1.8mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin53"]} pcbX="-3.25mm" pcbY="-2.2mm" width="0.7mm" height="0.2mm" shape="rect" />
+          <smtpad portHints={["pin54"]} pcbX="-2.35mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin55"]} pcbX="-2.75mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          <smtpad portHints={["pin56"]} pcbX="-3.15mm" pcbY="-2.6mm" width="0.2mm" height="0.7mm" shape="rect" />
+          
+          {/* GND pad (center) */}
+          <smtpad portHints={["pin57"]} pcbX="0mm" pcbY="0mm" width="3.2mm" height="3.2mm" shape="rect" />
+        </footprint>
+      }
+      {...props}
+    />
+  )
+}
diff --git a/boards/SparkFun-MicroMod-RP2040-Processor/SparkFun-MicroMod-RP2040-Processor.circuit.tsx b/boards/SparkFun-MicroMod-RP2040-Processor/SparkFun-MicroMod-RP2040-Processor.circuit.tsx
new file mode 100644
index 00000000..256eaf58
--- /dev/null
+++ b/boards/SparkFun-MicroMod-RP2040-Processor/SparkFun-MicroMod-RP2040-Processor.circuit.tsx
@@ -0,0 +1,354 @@
+import { RP2040 } from "./RP2040"
+import { W25Q128JV } from "./W25Q128JV"
+import { sel } from "tscircuit"
+
+const MicroModRP2040Processor = () => (
+    <board width="22mm" height="22mm">
+        {/* RP2040 Microcontroller */}
+        <RP2040
+            name="U1"
+            pcbX={0}
+            pcbY={2}
+            connections={{
+                // Power connections
+                IOVDD1: "net.VCC_3V3",
+                IOVDD2: "net.VCC_3V3",
+                IOVDD3: "net.VCC_3V3",
+                IOVDD4: "net.VCC_3V3",
+                IOVDD5: "net.VCC_3V3",
+                IOVDD6: "net.VCC_3V3",
+                DVDD1: "net.VCC_1V1",
+                DVDD2: "net.VCC_1V1",
+                USB_VDD: "net.VCC_3V3",
+                ADC_AVDD: "net.VCC_3V3",
+                VREG_VIN: "net.VCC_3V3",
+                VREG_VOUT: "net.VCC_1V1",
+                GND: "net.GND",
+
+                // QSPI Flash connections
+                QSPI_SCLK: sel.U2.CLK,
+                QSPI_SS: sel.U2.CS,
+                QSPI_SD0: sel.U2.DI_IO0,
+                QSPI_SD1: sel.U2.DO_IO1,
+                QSPI_SD2: sel.U2.WP_IO2,
+                QSPI_SD3: sel.U2.HOLD_IO3,
+
+                // Crystal oscillator
+                XIN: sel.Y1.pin1,
+                XOUT: sel.Y1.pin2,
+
+                // USB
+                USB_DP: "net.USB_DP",
+                USB_DM: "net.USB_DM",
+
+                // Debug
+                SWCLK: "net.SWCLK",
+                SWD: "net.SWD",
+                RUN: "net.RUN",
+
+                // Status LED
+                GPIO25: sel.R1.pin1,
+
+                // Test pin to ground
+                TESTEN: "net.GND",
+
+                // MicroMod Interface GPIO mapping
+                GPIO0: "net.I2C_SDA",
+                GPIO1: "net.I2C_SCL",
+                GPIO2: "net.SPI_SCK",
+                GPIO3: "net.SPI_COPI",
+                GPIO4: "net.SPI_CIPO",
+                GPIO5: "net.SPI_CS",
+                GPIO6: "net.D0",
+                GPIO7: "net.D1",
+                GPIO8: "net.UART_TX1",
+                GPIO9: "net.UART_RX1",
+                GPIO10: "net.SDIO_DATA2",
+                GPIO11: "net.SDIO_DATA1",
+                GPIO12: "net.SDIO_CLK",
+                GPIO13: "net.SDIO_CMD",
+                GPIO14: "net.SDIO_DATA0",
+                GPIO15: "net.SDIO_DATA3",
+                GPIO16: "net.PWM0",
+                GPIO17: "net.PWM1",
+                GPIO18: "net.I2C_SDA1",
+                GPIO19: "net.I2C_SCL1",
+                GPIO20: "net.AUD_LRCLK",
+                GPIO21: "net.AUD_OUT",
+                GPIO22: "net.AUD_IN",
+                GPIO23: "net.AUD_BCLK",
+                GPIO24: "net.G11",
+                GPIO26_ADC0: "net.A0",
+                GPIO27_ADC1: "net.A1",
+                GPIO28_ADC2: "net.VIN_DIV",
+                GPIO29_ADC3: "net.BATT_VIN",
+            }}
+        />
+
+        {/* 128Mbit QSPI Flash */}
+        <W25Q128JV
+            name="U2"
+            pcbX={-6}
+            pcbY={-4}
+            pcbRotation={90}
+            connections={{
+                VCC: "net.VCC_3V3",
+                GND: "net.GND",
+            }}
+        />
+
+        {/* 12MHz Crystal Oscillator */}
+        <crystal
+            name="Y1"
+            frequency="12MHz"
+            footprint="crystal0402"
+            pcbX={5}
+            pcbY={0}
+            pcbRotation={90}
+            schX={6}
+            schY={0}
+        />
+
+        {/* Crystal load capacitors */}
+        <capacitor
+            name="C1"
+            capacitance="20pF"
+            footprint="cap0402"
+            pcbX={6}
+            pcbY={1}
+            schX={7}
+            schY={1}
+            connections={{ pin1: sel.Y1.pin1, pin2: "net.GND" }}
+        />
+        <capacitor
+            name="C2"
+            capacitance="20pF"
+            footprint="cap0402"
+            pcbX={6}
+            pcbY={-1}
+            schX={7}
+            schY={-1}
+            connections={{ pin1: sel.Y1.pin2, pin2: "net.GND" }}
+        />
+
+        {/* Power decoupling capacitors */}
+        <capacitor
+            name="C3"
+            capacitance="0.1uF"
+            footprint="cap0402"
+            pcbX={2}
+            pcbY={6}
+            schX={-4}
+            schY={4}
+            connections={{ pin1: "net.VCC_3V3", pin2: "net.GND" }}
+        />
+        <capacitor
+            name="C4"
+            capacitance="0.1uF"
+            footprint="cap0402"
+            pcbX={0}
+            pcbY={6}
+            schX={-3}
+            schY={4}
+            connections={{ pin1: "net.VCC_3V3", pin2: "net.GND" }}
+        />
+        <capacitor
+            name="C5"
+            capacitance="0.1uF"
+            footprint="cap0402"
+            pcbX={-2}
+            pcbY={6}
+            schX={-2}
+            schY={4}
+            connections={{ pin1: "net.VCC_3V3", pin2: "net.GND" }}
+        />
+        <capacitor
+            name="C6"
+            capacitance="1uF"
+            footprint="cap0402"
+            pcbX={4}
+            pcbY={6}
+            schX={-1}
+            schY={4}
+            connections={{ pin1: "net.VCC_3V3", pin2: "net.GND" }}
+        />
+
+        {/* 1.1V core voltage capacitor */}
+        <capacitor
+            name="C7"
+            capacitance="1uF"
+            footprint="cap0402"
+            pcbX={-4}
+            pcbY={6}
+            schX={0}
+            schY={4}
+            connections={{ pin1: "net.VCC_1V1", pin2: "net.GND" }}
+        />
+
+        {/* USB decoupling */}
+        <capacitor
+            name="C8"
+            capacitance="0.1uF"
+            footprint="cap0402"
+            pcbX={-6}
+            pcbY={6}
+            schX={1}
+            schY={4}
+            connections={{ pin1: "net.VCC_3V3", pin2: "net.GND" }}
+        />
+
+        {/* Flash decoupling */}
+        <capacitor
+            name="C9"
+            capacitance="0.1uF"
+            footprint="cap0402"
+            pcbX={-8}
+            pcbY={-3}
+            schX={-6}
+            schY={-4}
+            connections={{ pin1: "net.VCC_3V3", pin2: "net.GND" }}
+        />
+
+        {/* Status LED with current limiting resistor */}
+        <resistor
+            name="R1"
+            resistance="1k"
+            footprint="res0402"
+            pcbX={7}
+            pcbY={4}
+            schX={4}
+            schY={2}
+            schRotation={90}
+            connections={{ pin2: sel.LED1.pin1 }}
+        />
+        <led
+            name="LED1"
+            color="blue"
+            footprint="led0402"
+            pcbX={7}
+            pcbY={6}
+            schX={4}
+            schY={0}
+            schRotation={270}
+            connections={{ pin2: "net.GND" }}
+        />
+
+        {/* BOOT button pull-up resistor */}
+        <resistor
+            name="R2"
+            resistance="10k"
+            footprint="res0402"
+            pcbX={-8}
+            pcbY={4}
+            schX={-6}
+            schY={2}
+            connections={{ pin1: "net.VCC_3V3", pin2: "net.RUN" }}
+        />
+
+        {/* USB termination resistor */}
+        <resistor
+            name="R3"
+            resistance="27R"
+            footprint="res0402"
+            pcbX={-7}
+            pcbY={0}
+            schX={-8}
+            schY={0}
+            connections={{ pin1: "net.USB_DP", pin2: "net.USB_DP_TERM" }}
+        />
+        <resistor
+            name="R4"
+            resistance="27R"
+            footprint="res0402"
+            pcbX={-7}
+            pcbY={-1}
+            schX={-8}
+            schY={-1}
+            connections={{ pin1: "net.USB_DM", pin2: "net.USB_DM_TERM" }}
+        />
+
+        {/* M.2 Edge Connector - simplified representation with key pins */}
+        <jumper
+            name="J1"
+            pinLabels={{
+                pin1: "GND",
+                pin2: "3V3",
+                pin3: "USB_DP",
+                pin4: "USB_DM",
+                pin5: "GND",
+                pin6: "D0",
+                pin7: "D1",
+                pin8: "I2C_SDA",
+                pin9: "I2C_SCL",
+                pin10: "SPI_CS",
+                pin11: "SPI_SCK",
+                pin12: "SPI_COPI",
+                pin13: "SPI_CIPO",
+                pin14: "UART_TX1",
+                pin15: "UART_RX1",
+                pin16: "A0",
+                pin17: "A1",
+                pin18: "PWM0",
+                pin19: "PWM1",
+                pin20: "GND",
+            }}
+            footprint="pinrow20"
+            pcbX={0}
+            pcbY={-9}
+            pcbRotation={0}
+            schX={0}
+            schY={-6}
+            schDirection="left"
+            connections={{
+                GND: "net.GND",
+                "3V3": "net.VCC_3V3",
+                USB_DP: "net.USB_DP_TERM",
+                USB_DM: "net.USB_DM_TERM",
+                D0: "net.D0",
+                D1: "net.D1",
+                I2C_SDA: "net.I2C_SDA",
+                I2C_SCL: "net.I2C_SCL",
+                SPI_CS: "net.SPI_CS",
+                SPI_SCK: "net.SPI_SCK",
+                SPI_COPI: "net.SPI_COPI",
+                SPI_CIPO: "net.SPI_CIPO",
+                UART_TX1: "net.UART_TX1",
+                UART_RX1: "net.UART_RX1",
+                A0: "net.A0",
+                A1: "net.A1",
+                PWM0: "net.PWM0",
+                PWM1: "net.PWM1",
+            }}
+        />
+
+        {/* Silkscreen labels */}
+        <silkscreentext text="MicroMod" fontSize={1.2} pcbX={0} pcbY={9} />
+        <silkscreentext text="RP2040" fontSize={1.0} pcbX={0} pcbY={7.5} />
+
+        {/* Board mounting holes */}
+        <hole diameter={1.5} pcbX={-9} pcbY={9} />
+        <hole diameter={1.5} pcbX={9} pcbY={9} />
+
+        {/* Net labels for schematic clarity */}
+        <netlabel net="VCC_3V3" connectsTo={sel.U1.IOVDD1} anchorSide="top" />
+        <netlabel net="GND" connectsTo={sel.U1.GND} anchorSide="bottom" />
+        <netlabel net="USB_DP" connectsTo={sel.U1.USB_DP} anchorSide="left" />
+        <netlabel net="USB_DM" connectsTo={sel.U1.USB_DM} anchorSide="left" />
+
+        <schematictext
+            text="SparkFun MicroMod RP2040 Processor"
+            fontSize={0.3}
+            schX={0}
+            schY={6}
+        />
+        <schematictext
+            text="VCC: 3.3V"
+            fontSize={0.2}
+            schX={6}
+            schY={5}
+            color="gray"
+        />
+    </board>
+)
+
+export default MicroModRP2040Processor
diff --git a/boards/SparkFun-MicroMod-RP2040-Processor/W25Q128JV.tsx b/boards/SparkFun-MicroMod-RP2040-Processor/W25Q128JV.tsx
new file mode 100644
index 00000000..a1f1bc32
--- /dev/null
+++ b/boards/SparkFun-MicroMod-RP2040-Processor/W25Q128JV.tsx
@@ -0,0 +1,58 @@
+import type { ChipProps } from "@tscircuit/props"
+
+const pinLabels = {
+    pin1: ["CS"],
+    pin2: ["DO_IO1"],
+    pin3: ["WP_IO2"],
+    pin4: ["GND"],
+    pin5: ["DI_IO0"],
+    pin6: ["CLK"],
+    pin7: ["HOLD_IO3"],
+    pin8: ["VCC"],
+} as const
+
+export const W25Q128JV = (props: ChipProps<typeof pinLabels>) => {
+    return (
+        <chip
+            pinLabels={pinLabels}
+            schWidth={1.6}
+            schHeight={1.2}
+            manufacturerPartNumber="W25Q128JVSIQ"
+            supplierPartNumbers={{
+                jlcpcb: ["C97521"],
+            }}
+            footprint={
+                <footprint>
+                    {/* SOIC-8 package */}
+                    <smtpad portHints={["pin1"]} pcbX="-2.7mm" pcbY="1.905mm" width="1.55mm" height="0.6mm" shape="rect" />
+                    <smtpad portHints={["pin2"]} pcbX="-2.7mm" pcbY="0.635mm" width="1.55mm" height="0.6mm" shape="rect" />
+                    <smtpad portHints={["pin3"]} pcbX="-2.7mm" pcbY="-0.635mm" width="1.55mm" height="0.6mm" shape="rect" />
+                    <smtpad portHints={["pin4"]} pcbX="-2.7mm" pcbY="-1.905mm" width="1.55mm" height="0.6mm" shape="rect" />
+                    <smtpad portHints={["pin5"]} pcbX="2.7mm" pcbY="-1.905mm" width="1.55mm" height="0.6mm" shape="rect" />
+                    <smtpad portHints={["pin6"]} pcbX="2.7mm" pcbY="-0.635mm" width="1.55mm" height="0.6mm" shape="rect" />
+                    <smtpad portHints={["pin7"]} pcbX="2.7mm" pcbY="0.635mm" width="1.55mm" height="0.6mm" shape="rect" />
+                    <smtpad portHints={["pin8"]} pcbX="2.7mm" pcbY="1.905mm" width="1.55mm" height="0.6mm" shape="rect" />
+
+                    {/* Silkscreen outline */}
+                    <silkscreenpath
+                        route={[
+                            { x: -1.95, y: 2.45 },
+                            { x: 1.95, y: 2.45 },
+                            { x: 1.95, y: -2.45 },
+                            { x: -1.95, y: -2.45 },
+                            { x: -1.95, y: 2.45 },
+                        ]}
+                    />
+                    {/* Pin 1 indicator */}
+                    <silkscreenpath
+                        route={[
+                            { x: -1.5, y: 2.0 },
+                            { x: -1.0, y: 2.0 },
+                        ]}
+                    />
+                </footprint>
+            }
+            {...props}
+        />
+    )
+}
diff --git a/boards/SparkFun-MicroMod-RP2040-Processor/index.tsx b/boards/SparkFun-MicroMod-RP2040-Processor/index.tsx
new file mode 100644
index 00000000..60b9bf63
--- /dev/null
+++ b/boards/SparkFun-MicroMod-RP2040-Processor/index.tsx
@@ -0,0 +1,2 @@
+import MicroModRP2040Processor from "./SparkFun-MicroMod-RP2040-Processor.circuit.tsx"
+export default MicroModRP2040Processor
diff --git a/boards/SparkFun-MicroMod-RP2040-Processor/tscircuit.config.json b/boards/SparkFun-MicroMod-RP2040-Processor/tscircuit.config.json
new file mode 100644
index 00000000..782f3950
--- /dev/null
+++ b/boards/SparkFun-MicroMod-RP2040-Processor/tscircuit.config.json
@@ -0,0 +1,3 @@
+{
+  "mainEntrypoint": "./index.tsx"
+}