diff --git a/README.md b/README.md
index 6fe805c..0dbd754 100644
--- a/README.md
+++ b/README.md
@@ -34,6 +34,7 @@ The following hotends are natively supported on this repository:
 
 The following are user-contributed hotend mounts, please direct any issues with them to their respective creators:
 - [TZ V6 2.0 by Adam Storm on Printables](https://www.printables.com/model/1170130-filamatrix-tz-v6-20-hotend-mount)
+- [Voron V6 CHC by francislz on Printables](https://www.printables.com/model/1648264-stealthburner-filamatrix-voron-v6-chc-clone)
 
 If you would like to have a hotend mount that you have created added to the above lists, please contact thunderkeys on the [ArmoredTurtle discord](https://discord.gg/armoredturtle) in the toolheads channel.
 
@@ -111,8 +112,8 @@ Depending on your printer you may find it more advantageous to mount the beefy d
 
 ## AFC Configuration
 
-Now that FilamATrix is installed, configure your software to leverage it.  If you are using the [AFC Klipper Add-On](https://github.com/ArmoredTurtle/AFC-Klipper-Add-On), you'll need to configure the locations to actuate the cutter arm.
-For further guidance you can also see the BoxTurtle [Initial Startup](https://github.com/ArmoredTurtle/BoxTurtle/blob/main/Initial_Startup.md) guide.
+Now that FilamATrix is installed, configure your software to leverage it.  If you are using the [AFC Klipper Add-On](https://github.com/AFCProject/AFC-Klipper-Add-On), you'll need to configure the locations to actuate the cutter arm.
+For further guidance you can also see the BoxTurtle [Initial Startup](https://www.armoredturtle.xyz/docs/boxturtle/initial_startup/01-overview.html) guide.
 
 If you are using other software, please refer to that project for the correct configuration.