input-controller.yaml

# These substitutions allow the end user to override certain values
substitutions:
  name: "inputcontroller"
  friendly_name: "Input Controller"

esphome:
  name: "${name}"
  # Friendly names are used where appropriate in Home Assistant
  friendly_name: "${friendly_name}"
  # Automatically add the mac address to the name
  # so you can use a single firmware for all devices
  name_add_mac_suffix: true

  # This will allow for (future) project identification,
  # configuration and updates.
  project:
    name: logicasa.input-controller
    version: "1.0"


esp32:
  board: nodemcu-32s

# To be able to get logs from the device via serial and api.
logger:

# API is a requirement of the dashboard import.
api:

# OTA is required for Over-the-Air updating
ota:

# This should point to the public location of this yaml file.
dashboard_import:
  package_import_url: github://syntos/LogiCasaInputController/input-controller.yaml@main
  import_full_config: false # or true

wifi:
  # Set up a wifi access point
  ap:

# In combination with the `ap` this allows the user
# to provision wifi credentials to the device.
captive_portal:

# Sets up Bluetooth LE (Only on ESP32) to allow the user
# to provision wifi credentials to the device.
esp32_improv:
  authorizer: none

# Sets up the improv via serial client for Wi-Fi provisioning
improv_serial:
  next_url: https://www.logi.casa

sensor:
  - platform: wifi_signal # Reports the WiFi signal strength/RSSI in dB
    name: "${name}_WiFi Signal dB"
    id: wifi_signal_db
    update_interval: 60s
    entity_category: "diagnostic"

  - platform: copy # Reports the WiFi signal strength in %
    source_id: wifi_signal_db
    name: "${name}_WiFi Signal"
    id: wifi_signal_pct
    filters:
      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
    unit_of_measurement: "%"
    entity_category: "diagnostic"

i2c:
  sda: 21
  scl: 22
  scan: True
 
mcp23017:
  - id: "mcp23017_hub1"
    address: 0x20
  - id: "mcp23017_hub2"
    address: 0x24

light:
  - platform: status_led
    name: "status led"
    output: statusoutput
  - platform: neopixelbus
    variant: WS2812
    pin: 5
    num_leds: 1
    name: "Status LED"
    id: statusled
    icon: "mdi:led-outline"
    restore_mode: ALWAYS_ON
    effects:
      - pulse:

output:
  - platform: template
    id: statusoutput
    type: binary
    write_action:
      if:
        condition:
          wifi.connected:
        then:
          - light.turn_on: 
              id: statusled
              green: 0.0
              red: 0.0
              blue: 1.0              
        else:
          - light.turn_on: 
              id: statusled
              green: 0.0
              red: 1.0
              blue: 0.0              

binary_sensor:
  - platform: gpio
    name: "${name}_INPUT_08"
    id: INPUT_08
    pin:
      mcp23xxx: mcp23017_hub1
      number: 0
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_07"
    id: INPUT_07
    pin:
      mcp23xxx: mcp23017_hub1
      number: 1
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_06"
    id: INPUT_06
    pin:
      mcp23xxx: mcp23017_hub1
      number: 2
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_05"
    id: INPUT_05
    pin:
      mcp23xxx: mcp23017_hub1
      number: 3
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_01"
    id: INPUT_01
    pin:
      mcp23xxx: mcp23017_hub1
      number: 4
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_02"
    id: INPUT_02
    pin:
      mcp23xxx: mcp23017_hub1
      number: 5
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_03"
    id: INPUT_03
    pin:
      mcp23xxx: mcp23017_hub1
      number: 6
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_04"
    id: INPUT_04
    pin:
      mcp23xxx: mcp23017_hub1
      number: 7
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_20"
    id: INPUT_20
    pin:
      mcp23xxx: mcp23017_hub1
      number: 8
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_19"
    id: INPUT_19
    pin:
      mcp23xxx: mcp23017_hub1
      number: 9
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_18"
    id: INPUT_18
    pin:
      mcp23xxx: mcp23017_hub1
      number: 10
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_17"
    id: INPUT_17
    pin:
      mcp23xxx: mcp23017_hub1
      number: 11
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_21"
    id: INPUT_21
    pin:
      mcp23xxx: mcp23017_hub1
      number: 12
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_22"
    id: INPUT_22
    pin:
      mcp23xxx: mcp23017_hub1
      number: 13
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_23"
    id: INPUT_23
    pin:
      mcp23xxx: mcp23017_hub1
      number: 14
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_24"
    id: INPUT_24
    pin:
      mcp23xxx: mcp23017_hub1
      number: 15
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_25"
    id: INPUT_25
    pin:
      mcp23xxx: mcp23017_hub2
      number: 0
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_26"
    id: INPUT_26
    pin:
      mcp23xxx: mcp23017_hub2
      number: 1
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_27"
    id: INPUT_27
    pin:
      mcp23xxx: mcp23017_hub2
      number: 2
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_28"
    id: INPUT_28
    pin:
      mcp23xxx: mcp23017_hub2
      number: 3
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_32"
    id: INPUT_32
    pin:
      mcp23xxx: mcp23017_hub2
      number: 4
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_31"
    id: INPUT_31
    pin:
      mcp23xxx: mcp23017_hub2
      number: 5
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_30"
    id: INPUT_30
    pin:
      mcp23xxx: mcp23017_hub2
      number: 6
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_29"
    id: INPUT_29
    pin:
      mcp23xxx: mcp23017_hub2
      number: 7
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_16"
    id: INPUT_16
    pin:
      mcp23xxx: mcp23017_hub2
      number: 8
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_15"
    id: INPUT_15
    pin:
      mcp23xxx: mcp23017_hub2
      number: 9
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_14"
    id: INPUT_14
    pin:
      mcp23xxx: mcp23017_hub2
      number: 10
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_13"
    id: INPUT_13
    pin:
      mcp23xxx: mcp23017_hub2
      number: 11
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_12"
    id: INPUT_12
    pin:
      mcp23xxx: mcp23017_hub2
      number: 12
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_11"
    id: INPUT_11
    pin:
      mcp23xxx: mcp23017_hub2
      number: 13
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_10"
    id: INPUT_10
    pin:
      mcp23xxx: mcp23017_hub2
      number: 14
      mode:
        input: true
        pullup: true
      inverted: True
  - platform: gpio
    name: "${name}_INPUT_09"
    id: INPUT_09
    pin:
      mcp23xxx: mcp23017_hub2
      number: 15
      mode:
        input: true
        pullup: true
      inverted: True    
button:
  - platform: restart
    name: "Reboot ${name}"
    id: reboot

  - platform: factory_reset
    name: Restart with Factory Default Settings