Store RTS and DTR in profile

[f5bud]

Sorry, I posted this in the wrong place!

Gktterm:
Would it be possible to save the status of the RTS and DTR signals in the profile?

I am a ham radio operator and I regularly use gtkterm to communicate with radios via CAT commands.
The RTS signal is a hardware command that switches the transmitter to transmission mode.

When the profile is opened, the transmitter switches to transmission mode, which is very annoying.

Thank you for your work.

[hpax]

This is also a huge problem on ESP32 platforms, where by convention DTR is used as a reset command and RTS if asserted immediately after reset is lifted the CPU will enter boot mode.