From 0b1cfb39173b719fe808fe01e5d3cf31abf4f698 Mon Sep 17 00:00:00 2001
From: Steven Tong <steven.c.tong@gmail.com>
Date: Tue, 19 Oct 2021 16:46:58 -0700
Subject: [PATCH 1/3] Add on_demand_backup_fileset.sh and iperf_test.sh

---
 Filesets/on_demand_backup_fileset.sh |  68 ++++++++++++++++
 Misc/iperf_test.sh                   | 117 +++++++++++++++++++++++++++
 2 files changed, 185 insertions(+)
 create mode 100644 Filesets/on_demand_backup_fileset.sh
 create mode 100755 Misc/iperf_test.sh

diff --git a/Filesets/on_demand_backup_fileset.sh b/Filesets/on_demand_backup_fileset.sh
new file mode 100644
index 0000000..4c9c291
--- /dev/null
+++ b/Filesets/on_demand_backup_fileset.sh
@@ -0,0 +1,68 @@
+#!/bin/bash
+
+# https://build.rubrik.com
+# This script will take an on demand backup of a fileset
+# For community usage
+
+################################################################################
+### RUBRIK VARIABLES
+# Configure using an API token for authentication
+TOKEN=''
+# Configure using a username:password for authenciation
+# The username:password can be encoded as a base64 string.
+# Use 'echo -n "admin:GoRubrik123" | base64' to generate with most Linux distros
+USER_PASS=''
+# Configure hostname or IP address of your Rubrik cluster
+RUBRIK=''
+# Fileset ID that you want to trigger on demand backup on
+FILESETID=''
+# SLA ID you want to associate with the on demand backup
+SLAID=''
+# Set MONITOR to non-zero if you want the script to monitor progress until the backup has finished
+MONITOR=0
+# Script execute time
+LOGPATH= #SomePath
+LAUNCHTIME=`date +%m%d%y_%H%M%S`
+################################################################################
+
+# If an API token is provided, use that. Otherwise, try using the encoded username/password
+if [ "$TOKEN" != "" ]
+then
+  AUTH_HEADER='Authorization:bearer '
+  AUTH_HEADER+=$TOKEN
+else
+  AUTH_HEADER='Authorization:basic '
+  AUTH_HEADER+=$USER_PASS
+fi
+
+JSON='{"slaId": "'"$SLAID"'"}'
+
+if [ "$MONITOR" -eq 0 ]
+then
+  curl -H "$AUTH_HEADER" -X POST -H 'Content-Type: application/json' -d "$JSON" 'https://'$RUBRIK'/api/v1/fileset/'$FILESETID'/snapshot' -k
+else
+  # Reset $STATUS in case it contains other values
+  STATUS=""
+
+  # Store the result of our on demand snapshot
+  RESULT=$(curl -H "$AUTH_HEADER" -X POST -H 'Content-Type: application/json' -d "$JSON" 'https://'$RUBRIK'/api/v1/fileset/'$FILESETID'/snapshot' -k)
+
+  # Pull out the URL that we use to query status
+  HREF=$(echo $RESULT | sed -e 's/.*href\"\:\"\(.*\)\"\,.*/\1/')
+  RUBRIKSTATUS=0
+
+  while [ $RUBRIKSTATUS -eq 0 ]
+  do
+    # Query the URL for the current status of the on demand backup
+    STATUS=$(curl -H "$AUTH_HEADER" -X GET -H 'Content-Type: application/json' "$HREF" -k)
+
+    # Check if any of the end states are found, if so, $RUBRIKSTATUS changes and loop exits
+    RUBRIKSTATUS=$(echo $STATUS | grep 'SUCCESS\|SUCCESSWITHWARNINGS\|FAILURE\|CANCELED' -c)
+
+    echo $STATUS
+    sleep 10
+  done
+
+  echo $STATUS
+fi
+exit 0
diff --git a/Misc/iperf_test.sh b/Misc/iperf_test.sh
new file mode 100755
index 0000000..4972fec
--- /dev/null
+++ b/Misc/iperf_test.sh
@@ -0,0 +1,117 @@
+#!/bin/bash
+# https://build.rubrik.com
+# Written by Steven Tong for community usage
+# Date: 10/15/21
+
+# This script will run 'iperf3' against several source-target host pairs using specified iPerf parameters.
+# The results will output to a JSON file which can then be parsed using:
+# - https://github.com/rubrikinc/rubrik-scripts-for-powershell/blob/master/MISC/Parse-iPerfResults.ps1
+# The script can log into each TARGET host to put it in '-s' mode,
+# or you can manually put all TARGETS in '-s'.
+# The script will cycle through all the SOURCE hosts and run iPerf to the TARGET hosts.
+# iPerf parameters should be specified and each parameter will be a test run.
+# You will need passwordless SSH in order for this script to work.
+# The script is setup to use Rubrik nodes as the source and ESXi hosts as a target as an example.
+
+# File results will be appended to
+RESULTS="./iperf_results_$(date +%Y-%m-%d)_$(date +%H%M).json"
+# Log file
+LOGPATH="./iperf_test.log"
+# iPerf command to run on source side (Tx, executes -c with arguments)
+SOURCE_IPERF3="network iperf -3"
+# iPerf command to run on target side (Rx, executes -s)
+TARGET_IPERF3="/usr/lib/vmware/vsan/bin/iperf3.copy"
+# SSH user for source hosts
+SOURCE_USERNAME="admin"
+# SSH user for target hosts
+TARGET_USERNAME="root"
+# Service name to kill on target host when finished testing
+TARGET_IPERF3_SERVICE="iperf3.copy"
+
+# Array of source hosts, iPerf Tx, these use '-c' and send traffic
+SOURCE_IPERF=('rubrik1' 'rubrik2' 'rubrik3' 'rubrik4')
+
+# Array of target hosts, iPerf Rx, these are put in server mode (-s) and receive traffic
+# Use the following if you want to specify different targets
+TARGET_IPERF=('esxi1' 'esxi2' 'esxi3')
+
+# Use the following if you want to test between all source pairs
+# TARGET_IPERF=("${SOURCE_IPERF[@]}")
+
+# Whether to SSH to each TARGET to put it in iperf server (-s) mode
+# '1' or non-zero to put the TARGET in -s mode
+# '0' to not put the TARGET in -s mode
+# If '0' then you will manually login to each target host and put into 'iperf3 -s' mode
+TARGET_SERVER_MODE=1
+
+# iPerf parameters to use, below are some common ones
+# -J : Always include to output results to JSON
+# -t <#> : # of seconds to run each test for
+# -P <#> : # of parallel threads, default 1, recommend also testing w/4
+# -w <#> : TCP window size
+# -R : Reverse the direction of source / target (send and receive)
+IPERF_PARAMS=('-t 15 -J' '-t 15 -P 4 -J' '-t 15 -R -J' '-t 15 -P 4 -R -J')
+
+echo -e "\n\nLogging started: $(date +%m-%d-%y) $(date +%H:%M:%S)" >> $LOGPATH
+
+# Make a copy of iperf3 to use if testing ESXi hosts
+echo -e "\n\nMaking a copy of iperf3: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+COMMAND="cp /usr/lib/vmware/vsan/bin/iperf3 $IPERF3"
+# for i in "${SOURCE_IPERF[@]}"; do
+#   ssh -t $SOURCE_USERNAME@$i -- $COMMAND >> $LOGPATH
+# done
+for i in "${TARGET_IPERF[@]}"; do
+  ssh -t $TARGET_USERNAME@$i -- $COMMAND >> $LOGPATH
+done
+
+# Run iperf3 test matrix for each host
+echo -e "\n\nRunning iperf3 test matrix: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+
+# Loop through each host as the target
+for target in "${TARGET_IPERF[@]}"; do
+  # Put the target into iPerf '-s' server mode
+  if [ $TARGET_SERVER_MODE != 0 ]; then
+    echo -e "\n${target}: Putting into iperf3 server mode (-s): $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+    COMMAND="hostname;$TARGET_IPERF3 -s"
+    ssh -f $TARGET_USERNAME@$target -- $COMMAND >> $LOGPATH
+  fi
+
+  # Loop through each host as a source
+  for source in "${SOURCE_IPERF[@]}"; do
+    # Loop through each param and perform an iperf for each source-target-param pairing
+    for param in "${IPERF_PARAMS[@]}"; do
+      # Run test if the source and target host are different
+      if [ $source != $target ]; then
+        echo -e "\nSource: $source; Target: $target; $SOURCE_IPERF3 -c $param" | tee -a $LOGPATH
+        COMMAND="$SOURCE_IPERF3 -c $target $param"
+        ssh -t $SOURCE_USERNAME@$source -- $COMMAND >> $RESULTS
+
+        SLEEP 3
+      fi
+    done
+  done
+
+  if [ $TARGET_SERVER_MODE != 0 ]; then
+    # Kill iPerf3 service on the target host
+    echo -e "\n${target}: Killing iperf3 service: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+    COMMAND="hostname;pkill $TARGET_IPERF3_SERVICE"
+    ssh -t $TARGET_USERNAME@$target -- $COMMAND >> $LOGPATH
+  fi
+
+done
+
+
+# Put iperf3 in server mode on all hosts
+# echo -e "\n\nPutting all hosts into iperf3 server mode: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+# COMMAND="hostname;$IPERF3 -s"
+#
+# for i in "${SOURCE_IPERF[@]}"; do
+#   ssh -f $SOURCE_USERNAME@$i -- $COMMAND >> $LOGPATH
+# done
+
+# Kill any running iPerf3 process
+# echo -e "\n\nKilling iperf3 service on all hosts: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+# COMMAND="hostname;pkill $IPERF3_SERVICE"
+# for i in "${SOURCE_IPERF[@]}"; do
+#   ssh -t $SOURCE_USERNAME@$i -- $COMMAND >> $LOGPATH
+# done

From e603aaf9aaee06d3a2f18258550176669281afa2 Mon Sep 17 00:00:00 2001
From: Steven Tong <steven.c.tong@gmail.com>
Date: Mon, 25 Oct 2021 17:48:42 -0700
Subject: [PATCH 2/3] Added scripts

---
 Filesets/invoke-filesetrestore.sh    | 236 +++++++++++++++++++++++++++
 Filesets/iperf_test.sh               | 117 +++++++++++++
 Filesets/on_demand_backup_fileset.sh |  47 +++---
 3 files changed, 377 insertions(+), 23 deletions(-)
 create mode 100755 Filesets/invoke-filesetrestore.sh
 create mode 100755 Filesets/iperf_test.sh

diff --git a/Filesets/invoke-filesetrestore.sh b/Filesets/invoke-filesetrestore.sh
new file mode 100755
index 0000000..7972f0f
--- /dev/null
+++ b/Filesets/invoke-filesetrestore.sh
@@ -0,0 +1,236 @@
+#!/bin/bash
+# Requires 'curl' and 'jq'
+# https://build.rubrik.com
+# Written by Steven Tong for community usage
+# Date: 12/10/20, updated: 10/24/21
+
+# This script will restore a fileset to an alternate host (fileset export).
+# A list of source and target directories must be provided.
+# The script will list the available snapshots for the fileset so the user can select a point in time for restore.
+# Once selected the script will kick off a restore job for each source-target directory pair.
+
+# For authentication, use either an API token or base64 encoded username:password
+
+### RUBRIK VARIABLES - BEGIN ###
+# Configure an API token for authentication
+TOKEN=''
+# Configure a username:password for authenciation
+# The username:password must be encoded as a base64 string.
+# Use 'echo -n "admin:GoRubrik123" | base64' to generate with most Linux distros
+USER_PASS='c3RldmVuLnRvbmdAcnVicmlrZGVtby5jb206QXBwbGFwcGwyMw=='
+# Hostname or IP address of the Rubrik cluster
+RUBRIK='amer1-rbk01.rubrikdemo.com'
+# SOURCE - Fileset ID that you want to restore from
+FILESETID='Fileset:::62155444-b52f-410b-b5d1-64e371787f5b'
+# SOURCE - List of directories to restore, separated by a space in the array.
+# All files and sub-directories under these directories will be selected for restore.
+SOURCE_DIR=('/home/steven.tong/epic/prd01' '/home/steven.tong/epic/prd02' '/home/steven.tong/epic/prd03')
+# TARGET -  List of directories to restore to, must have same number of directories as $SOURCE_DIR.
+# All files and sub-directories from each source directory will be restored to the corresponding target directory.
+TARGET_DIR=('/home/steven.tong/restore/prd01' '/home/steven.tong/restore/prd02' '/home/steven.tong/restore/prd03')
+# TARGET - Host ID that you want to restore to
+TARGET_HOSTID=''
+# TARGET_HOSTID='Host:::37eaa1b3-df31-4c06-9ae5-18e0f9ce8769'
+# Set MONITOR to non-zero if you want the script to monitor progress until the backup has finished
+MONITOR=0
+# Script execution time
+LOGPATH= #SomePath
+LAUNCHTIME=`date +%m%d%y_%H%M%S`
+################################################################################
+
+### Check to ensure the json utility jq is installed
+echo $SHELL
+
+command -v jq >/dev/null 2>&1 || { echo >&2 "Script requires the utility jq. Aborting."; exit 1; }
+
+# If an API token is provided, use that. Otherwise, use username password
+if [ "$TOKEN" != '' ]
+then
+  AUTH_HEADER='Authorization:bearer '
+  AUTH_HEADER+=$TOKEN
+else
+  AUTH_HEADER='Authorization:basic '
+  AUTH_HEADER+=$USER_PASS
+fi
+
+# Checks if the number of restore directories to target directories is equal, exits on error
+if [ ${#SOURCE_DIR[@]} != ${#TARGET_DIR[@]} ]
+then
+  echo "ERROR: Number of SOURCE_DIR is not equal to TARGET_DIR. ABORTING"
+  exit 1
+fi
+
+# Check that the target host is valid if it is configured
+if [ "$TARGET_HOSTID" != '' ]
+then
+  # Gets the hostname of the Target Host ID and exits if the host is not found
+  TARGET_HOSTNAME=''
+  HOSTINFO=$(curl -H "$AUTH_HEADER" -X GET -H 'Content-Type: application/json' 'https://'$RUBRIK'/api/v1/host/'$TARGET_HOSTID -k -1 -s)
+  TARGET_HOSTNAME=$(echo $HOSTINFO | jq -r '.name')
+
+  if [ "$TARGET_HOSTNAME" = '' ]
+  then
+    echo "ERROR: No TARGET_HOSTID found. ABORTING"
+    exit 1
+  fi
+fi
+
+# Grabs the info and snapshot list for the Source Fileset ID
+FILESETINFO=$(curl -H "$AUTH_HEADER" -X GET -H 'Content-Type: application/json' 'https://'$RUBRIK'/api/v1/fileset/'$FILESETID -k -1 -s)
+
+# Initiate an array to store the snapshot IDs and dates
+# The oldest snapshot will be the first index in the array (array[1])
+SNAPSHOTIDS=()
+SNAPSHOTDATES=()
+
+# Get the snapshots from the fileset data
+SNAPSHOTINFO=$(echo $FILESETINFO | jq -c '.snapshots[]')
+
+# Loop through the snapshots and pull out the snapshot IDs and dates
+while read -r line
+do
+  SNAPSHOTIDS+=($(echo $line | jq -r '.id'))
+  SNAPSHOTDATES+=($(echo $line | jq -r '.date'))
+done <<< "$SNAPSHOTINFO"
+
+# List out all the snapshots found and the corresponding array index for selection
+echo -e "\n##  Snapshot Dates (UTC)"
+echo "--  --------------------"
+
+i=0
+while [ $i -lt ${#SNAPSHOTDATES[@]} ]
+do
+  printf '%-3s %-20s\n' $i ${SNAPSHOTDATES[$i]}
+  ((i++))
+done
+
+USERSNAPSHOT=-1
+
+# Prompts for which snapshot # to recover from with some lightweight checking
+while [[ $USERSNAPSHOT -lt 0 || $USERSNAPSHOT -ge ${#SNAPSHOTDATES[@]} ]]
+do
+  echo -e -n "\nEnter snapshot # to recover from:  "
+  read USERSNAPSHOT
+
+  if [[ $USERSNAPSHOT -lt 0 || $USERSNAPSHOT -ge ${#SNAPSHOTDATES[@]} ]]
+   then
+    echo "Selection outside acceptable range, try again"
+  fi
+done
+
+# Sets the snapshot ID that is selected by the user to $SNAPSHOTIDTORESTORE
+SNAPSHOTIDTORESTORE=${SNAPSHOTIDS[$USERSNAPSHOT]}
+
+# Lists out the details of the snapshot selected for review
+echo -e "\nRestoring from: ${SNAPSHOTDATES[$USERSNAPSHOT]} UTC; snapshot ID: $SNAPSHOTIDTORESTORE"
+
+if [ "$TARGET_HOSTID" != '' ]
+then
+  echo "Target hostname: $TARGET_HOSTNAME; host ID: $TARGET_HOSTID"
+else
+  echo "Restoring to same host since no target host id was configured"
+fi
+
+echo -e "Fileset ID: $FILESETID\n"
+echo "Source Directory  to  Target Directory"
+echo "--------------------------------------"
+
+i=0
+while [ $i -lt ${#SOURCE_DIR[@]} ]
+do
+  echo "${SOURCE_DIR[$i]}  to  ${TARGET_DIR[$i]}"
+  ((i++))
+done
+
+# Checks that the user wants to proceed by typing 'y'. Otherwise, exits script
+echo -e -n "\nType 'y' to proceed:  "
+read USERPROCEED
+
+if [ "$USERPROCEED" != 'y' ]
+then
+  echo "Exiting script"; exit 2
+fi
+
+# Create JSON for restore body
+RESTORE_JSON='{ "restoreConfig": [ '
+
+# Loop through all the source directories to create JSON body
+SOURCECOUNT=0
+while [ $SOURCECOUNT -lt ${#SOURCE_DIR[@]} ]
+do
+  # Get the list of files and sub-folders under the source directory
+  DIRINFO=$(curl -H "$AUTH_HEADER" -X GET -H 'Content-Type: application/json' \
+    'https://'$RUBRIK'/api/internal/browse?limit=500&snapshot_id='$SNAPSHOTIDTORESTORE'&path='${SOURCE_DIR[$SOURCECOUNT]} -k -1 -s)
+
+  # Test if the source directory info was returned, and if not, exit script
+  TESTDIRINFO=$(echo $DIRINFO | jq -r '.data[].filename')
+  if [ "$TESTDIRINFO" = '' ]
+  then
+    echo "ERROR: Invalid path info for source directory: ${SOURCE_DIR[$SOURCECOUNT]}. ABORTING"
+    exit 1
+  else
+    # Create an array of all the files and sub-folders (paths) under the source directory
+    PATHLIST=()
+
+    PATHINFO=$(echo $DIRINFO | jq -r '.data[].filename')
+    while read -r line
+    do
+      PATHLIST+=($line)
+    done <<< $PATHINFO
+  fi
+
+  # Loop through each path, create a JSON for the source-target pair, and add to the restore JSON body
+  PATHCOUNT=0
+  while [ $PATHCOUNT -lt ${#PATHLIST[@]} ]
+  do
+    PATHBODY='{ "path": "'${SOURCE_DIR[$SOURCECOUNT]}'/'${PATHLIST[$PATHCOUNT]}'", "restorePath": "'${TARGET_DIR[$SOURCECOUNT]}'" }'
+    RESTORE_JSON+=$PATHBODY
+    ((PATHCOUNT++))
+
+    # Check if this is the last path to be added, and if not, add ", " to the JSON body
+    if [ $PATHCOUNT -lt ${#PATHLIST[@]} ]
+    then
+      RESTORE_JSON+=', '
+    fi
+  done  # while [ $PATHCOUNT -le ${#PATHLIST[@]} ]
+  ((SOURCECOUNT++))
+
+  # Check if this is the last source directory to be processed, and if not, add ", " to the JSON body
+  if [ $SOURCECOUNT -lt ${#SOURCE_DIR[@]} ]
+  then
+    RESTORE_JSON+=', '
+  fi
+done  # while [ $SOURCECOUNT -le ${#SOURCE_DIR[@]} ]
+
+# Complete JSON for the restore body
+RESTORE_JSON+=' ], "ignoreErrors": false }'
+
+echo "Restore request:"
+echo $RESTORE_JSON | jq
+
+# Invoke the restore task
+RESULT=$(curl -X POST -H "$AUTH_HEADER" -H 'Content-Type: application/json' -d "$RESTORE_JSON" 'https://'$RUBRIK'/api/internal/fileset/snapshot/'$SNAPSHOTIDTORESTORE'/restore_files' -k -1 -s)
+echo $RESULT
+
+if [ $MONITOR -ne 0 ]; then
+  # Reset $STATUS in case it contains other values
+  STATUS=""
+
+  # Pull out the URL that we use to query status
+  HREF=$(echo $RESULT | sed -e 's/.*href\"\:\"\(.*\)\"\,.*/\1/')
+  RUBRIKSTATUS=0
+
+  while [ $RUBRIKSTATUS -eq 0 ]
+  do
+    # Query the URL for the current status of the on demand backup
+    STATUS=$(curl -H "$AUTH_HEADER" -X GET -H 'Content-Type: application/json' "$HREF" -k -1 -s)
+
+    # Check if any of the end states are found, if so, $RUBRIKSTATUS changes and loop exits
+    RUBRIKSTATUS=$(echo $STATUS | grep 'SUCCESS\|SUCCESSWITHWARNINGS\|FAILURE\|CANCELED' -c)
+
+    echo $STATUS
+    sleep 30
+  done
+
+  echo $STATUS
+fi
diff --git a/Filesets/iperf_test.sh b/Filesets/iperf_test.sh
new file mode 100755
index 0000000..4972fec
--- /dev/null
+++ b/Filesets/iperf_test.sh
@@ -0,0 +1,117 @@
+#!/bin/bash
+# https://build.rubrik.com
+# Written by Steven Tong for community usage
+# Date: 10/15/21
+
+# This script will run 'iperf3' against several source-target host pairs using specified iPerf parameters.
+# The results will output to a JSON file which can then be parsed using:
+# - https://github.com/rubrikinc/rubrik-scripts-for-powershell/blob/master/MISC/Parse-iPerfResults.ps1
+# The script can log into each TARGET host to put it in '-s' mode,
+# or you can manually put all TARGETS in '-s'.
+# The script will cycle through all the SOURCE hosts and run iPerf to the TARGET hosts.
+# iPerf parameters should be specified and each parameter will be a test run.
+# You will need passwordless SSH in order for this script to work.
+# The script is setup to use Rubrik nodes as the source and ESXi hosts as a target as an example.
+
+# File results will be appended to
+RESULTS="./iperf_results_$(date +%Y-%m-%d)_$(date +%H%M).json"
+# Log file
+LOGPATH="./iperf_test.log"
+# iPerf command to run on source side (Tx, executes -c with arguments)
+SOURCE_IPERF3="network iperf -3"
+# iPerf command to run on target side (Rx, executes -s)
+TARGET_IPERF3="/usr/lib/vmware/vsan/bin/iperf3.copy"
+# SSH user for source hosts
+SOURCE_USERNAME="admin"
+# SSH user for target hosts
+TARGET_USERNAME="root"
+# Service name to kill on target host when finished testing
+TARGET_IPERF3_SERVICE="iperf3.copy"
+
+# Array of source hosts, iPerf Tx, these use '-c' and send traffic
+SOURCE_IPERF=('rubrik1' 'rubrik2' 'rubrik3' 'rubrik4')
+
+# Array of target hosts, iPerf Rx, these are put in server mode (-s) and receive traffic
+# Use the following if you want to specify different targets
+TARGET_IPERF=('esxi1' 'esxi2' 'esxi3')
+
+# Use the following if you want to test between all source pairs
+# TARGET_IPERF=("${SOURCE_IPERF[@]}")
+
+# Whether to SSH to each TARGET to put it in iperf server (-s) mode
+# '1' or non-zero to put the TARGET in -s mode
+# '0' to not put the TARGET in -s mode
+# If '0' then you will manually login to each target host and put into 'iperf3 -s' mode
+TARGET_SERVER_MODE=1
+
+# iPerf parameters to use, below are some common ones
+# -J : Always include to output results to JSON
+# -t <#> : # of seconds to run each test for
+# -P <#> : # of parallel threads, default 1, recommend also testing w/4
+# -w <#> : TCP window size
+# -R : Reverse the direction of source / target (send and receive)
+IPERF_PARAMS=('-t 15 -J' '-t 15 -P 4 -J' '-t 15 -R -J' '-t 15 -P 4 -R -J')
+
+echo -e "\n\nLogging started: $(date +%m-%d-%y) $(date +%H:%M:%S)" >> $LOGPATH
+
+# Make a copy of iperf3 to use if testing ESXi hosts
+echo -e "\n\nMaking a copy of iperf3: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+COMMAND="cp /usr/lib/vmware/vsan/bin/iperf3 $IPERF3"
+# for i in "${SOURCE_IPERF[@]}"; do
+#   ssh -t $SOURCE_USERNAME@$i -- $COMMAND >> $LOGPATH
+# done
+for i in "${TARGET_IPERF[@]}"; do
+  ssh -t $TARGET_USERNAME@$i -- $COMMAND >> $LOGPATH
+done
+
+# Run iperf3 test matrix for each host
+echo -e "\n\nRunning iperf3 test matrix: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+
+# Loop through each host as the target
+for target in "${TARGET_IPERF[@]}"; do
+  # Put the target into iPerf '-s' server mode
+  if [ $TARGET_SERVER_MODE != 0 ]; then
+    echo -e "\n${target}: Putting into iperf3 server mode (-s): $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+    COMMAND="hostname;$TARGET_IPERF3 -s"
+    ssh -f $TARGET_USERNAME@$target -- $COMMAND >> $LOGPATH
+  fi
+
+  # Loop through each host as a source
+  for source in "${SOURCE_IPERF[@]}"; do
+    # Loop through each param and perform an iperf for each source-target-param pairing
+    for param in "${IPERF_PARAMS[@]}"; do
+      # Run test if the source and target host are different
+      if [ $source != $target ]; then
+        echo -e "\nSource: $source; Target: $target; $SOURCE_IPERF3 -c $param" | tee -a $LOGPATH
+        COMMAND="$SOURCE_IPERF3 -c $target $param"
+        ssh -t $SOURCE_USERNAME@$source -- $COMMAND >> $RESULTS
+
+        SLEEP 3
+      fi
+    done
+  done
+
+  if [ $TARGET_SERVER_MODE != 0 ]; then
+    # Kill iPerf3 service on the target host
+    echo -e "\n${target}: Killing iperf3 service: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+    COMMAND="hostname;pkill $TARGET_IPERF3_SERVICE"
+    ssh -t $TARGET_USERNAME@$target -- $COMMAND >> $LOGPATH
+  fi
+
+done
+
+
+# Put iperf3 in server mode on all hosts
+# echo -e "\n\nPutting all hosts into iperf3 server mode: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+# COMMAND="hostname;$IPERF3 -s"
+#
+# for i in "${SOURCE_IPERF[@]}"; do
+#   ssh -f $SOURCE_USERNAME@$i -- $COMMAND >> $LOGPATH
+# done
+
+# Kill any running iPerf3 process
+# echo -e "\n\nKilling iperf3 service on all hosts: $(date +%m-%d-%y) $(date +%H:%M:%S)" | tee -a $LOGPATH
+# COMMAND="hostname;pkill $IPERF3_SERVICE"
+# for i in "${SOURCE_IPERF[@]}"; do
+#   ssh -t $SOURCE_USERNAME@$i -- $COMMAND >> $LOGPATH
+# done
diff --git a/Filesets/on_demand_backup_fileset.sh b/Filesets/on_demand_backup_fileset.sh
index 4c9c291..6045560 100644
--- a/Filesets/on_demand_backup_fileset.sh
+++ b/Filesets/on_demand_backup_fileset.sh
@@ -1,18 +1,22 @@
 #!/bin/bash
-
+# Requires 'curl'
 # https://build.rubrik.com
-# This script will take an on demand backup of a fileset
-# For community usage
+# Written by Steven Tong for community usage
+# Date: 1/6/21, updated: 10/24/21
+
+# This script will take an on demand backup of a fileset with a corresponding SLA.
+# Create a custom role to limit the privileges of the script user.
 
-################################################################################
-### RUBRIK VARIABLES
-# Configure using an API token for authentication
+# For authentication, use either an API token or base64 encoded username:password
+
+### RUBRIK VARIABLES - BEGIN ###
+# Configure an API token for authentication
 TOKEN=''
-# Configure using a username:password for authenciation
-# The username:password can be encoded as a base64 string.
+# Configure a username:password for authenciation
+# The username:password must be encoded as a base64 string.
 # Use 'echo -n "admin:GoRubrik123" | base64' to generate with most Linux distros
 USER_PASS=''
-# Configure hostname or IP address of your Rubrik cluster
+# Hostname or IP address of the Rubrik cluster
 RUBRIK=''
 # Fileset ID that you want to trigger on demand backup on
 FILESETID=''
@@ -20,13 +24,13 @@ FILESETID=''
 SLAID=''
 # Set MONITOR to non-zero if you want the script to monitor progress until the backup has finished
 MONITOR=0
-# Script execute time
+# Script execution time
 LOGPATH= #SomePath
 LAUNCHTIME=`date +%m%d%y_%H%M%S`
-################################################################################
+### RUBRIK VARIABLES - END ###
 
 # If an API token is provided, use that. Otherwise, try using the encoded username/password
-if [ "$TOKEN" != "" ]
+if [ "$TOKEN" != '' ]
 then
   AUTH_HEADER='Authorization:bearer '
   AUTH_HEADER+=$TOKEN
@@ -35,18 +39,16 @@ else
   AUTH_HEADER+=$USER_PASS
 fi
 
-JSON='{"slaId": "'"$SLAID"'"}'
+JSON='{"slaId": "'$SLAID'"}'
 
-if [ "$MONITOR" -eq 0 ]
-then
-  curl -H "$AUTH_HEADER" -X POST -H 'Content-Type: application/json' -d "$JSON" 'https://'$RUBRIK'/api/v1/fileset/'$FILESETID'/snapshot' -k
-else
+# Trigger on demand backup using curl
+RESULT=$(curl -H "$AUTH_HEADER" -X POST -H 'Content-Type: application/json' -d "$JSON" 'https://'$RUBRIK'/api/v1/fileset/'$FILESETID'/snapshot' -k -1 -s)
+echo $RESULT
+
+if [ $MONITOR -ne 0 ]; then
   # Reset $STATUS in case it contains other values
   STATUS=""
 
-  # Store the result of our on demand snapshot
-  RESULT=$(curl -H "$AUTH_HEADER" -X POST -H 'Content-Type: application/json' -d "$JSON" 'https://'$RUBRIK'/api/v1/fileset/'$FILESETID'/snapshot' -k)
-
   # Pull out the URL that we use to query status
   HREF=$(echo $RESULT | sed -e 's/.*href\"\:\"\(.*\)\"\,.*/\1/')
   RUBRIKSTATUS=0
@@ -54,15 +56,14 @@ else
   while [ $RUBRIKSTATUS -eq 0 ]
   do
     # Query the URL for the current status of the on demand backup
-    STATUS=$(curl -H "$AUTH_HEADER" -X GET -H 'Content-Type: application/json' "$HREF" -k)
+    STATUS=$(curl -H "$AUTH_HEADER" -X GET -H 'Content-Type: application/json' "$HREF" -k -1 -s)
 
     # Check if any of the end states are found, if so, $RUBRIKSTATUS changes and loop exits
     RUBRIKSTATUS=$(echo $STATUS | grep 'SUCCESS\|SUCCESSWITHWARNINGS\|FAILURE\|CANCELED' -c)
 
     echo $STATUS
-    sleep 10
+    sleep 30
   done
 
   echo $STATUS
 fi
-exit 0

From 8e4df6abc3961ba2e3c7d85c6ec34a701d4e5a0d Mon Sep 17 00:00:00 2001
From: Steven Tong <steven.c.tong@gmail.com>
Date: Mon, 25 Oct 2021 17:54:27 -0700
Subject: [PATCH 3/3] Updated variables

---
 Filesets/invoke-filesetrestore.sh | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Filesets/invoke-filesetrestore.sh b/Filesets/invoke-filesetrestore.sh
index 7972f0f..3a9d320 100755
--- a/Filesets/invoke-filesetrestore.sh
+++ b/Filesets/invoke-filesetrestore.sh
@@ -17,18 +17,19 @@ TOKEN=''
 # Configure a username:password for authenciation
 # The username:password must be encoded as a base64 string.
 # Use 'echo -n "admin:GoRubrik123" | base64' to generate with most Linux distros
-USER_PASS='c3RldmVuLnRvbmdAcnVicmlrZGVtby5jb206QXBwbGFwcGwyMw=='
+USER_PASS=''
 # Hostname or IP address of the Rubrik cluster
-RUBRIK='amer1-rbk01.rubrikdemo.com'
+RUBRIK=''
 # SOURCE - Fileset ID that you want to restore from
 FILESETID='Fileset:::62155444-b52f-410b-b5d1-64e371787f5b'
 # SOURCE - List of directories to restore, separated by a space in the array.
 # All files and sub-directories under these directories will be selected for restore.
-SOURCE_DIR=('/home/steven.tong/epic/prd01' '/home/steven.tong/epic/prd02' '/home/steven.tong/epic/prd03')
+SOURCE_DIR=('/epic/prd01' '/epic/prd02' '/epic/prd03')
 # TARGET -  List of directories to restore to, must have same number of directories as $SOURCE_DIR.
 # All files and sub-directories from each source directory will be restored to the corresponding target directory.
-TARGET_DIR=('/home/steven.tong/restore/prd01' '/home/steven.tong/restore/prd02' '/home/steven.tong/restore/prd03')
-# TARGET - Host ID that you want to restore to
+TARGET_DIR=('/restore/prd01' '/restore/prd02' '/restore/prd03')
+# TARGET - Host ID that you want to restore to.
+# If $TARGET_HOSTID is blank,  the restore will be done to the same host it was backed up from
 TARGET_HOSTID=''
 # TARGET_HOSTID='Host:::37eaa1b3-df31-4c06-9ae5-18e0f9ce8769'
 # Set MONITOR to non-zero if you want the script to monitor progress until the backup has finished