Error occur running pytest test/DM_test.py

[Mingru]

I am using OpenSync 6.6.1 with OpenWrt running on the Banana Pi R4. Some errors occur when running pytest test/DM_test.py.
My test environment consists of one DUT and one FUT testbed on the same subnet.
Is there anything wrong with my testbed configuration file location.yaml or the device configuration file bananapi4.yaml?

DM_test_error.txt

bananapi4_rdkb.yaml.txt
location.yaml.txt

[daljaz]

Hello @Mingru,
Thanks for reaching out! To help us effectively address the error you're encountering, we'll need a bit more information.
Could you please provide details on the following?

• Testbed Setup Type: Is it CRATOS or OSRT? You can find more information here.
• Testbed Setup Details: Please include device types and their versions.
• Procedure: What commands did you execute to achieve this output?

Based on the current information, I can speculate on a couple of areas you might want to investigate:

• Incorrect testbed setup or device versions: It's worth verifying that your testbed is set up correctly and that you're using the appropriate device versions. Once those are confirmed, then it would make sense to look into the correctness of the location config file, which seems to be misconfigured.
• Incorrect test invocation: While less likely at this point, it's also a possibility.

After providing these details, we will help you pinpoint the issue and offer a resolution.

[daljaz]

We would also like to let you know that a new release, FUT-2.6, is due shortly. If you are currently in the process of setting up configurations and testing, this might be of particular interest to you, as it officially supports OpenSync 6.6.x.

[Mingru]

Hi @daljaz,
Thank you for the response.

I believe my testbed setup type is CRATOS, but I don't have all the hardware components. Are some hardware components optional? What is the minimum hardware requirement for CRATOS?

I updated FUT from 2.4 to 2.6, and my current goal is to check whether FUT can test with the DUT. So, I created some dummy data in location.yaml.txt, such as a Leaf 1 node, clients, and a switch.

I executed pytest test/DM_test.py, and some different errors occurred.