diff --git a/Documentation/LipSync_Maker_Guide.pdf b/Documentation/LipSync_Maker_Guide.pdf index 3dcb434..7c46026 100644 Binary files a/Documentation/LipSync_Maker_Guide.pdf and b/Documentation/LipSync_Maker_Guide.pdf differ diff --git a/Documentation/Working_Documents/LipSync_Maker_Guide.docx b/Documentation/Working_Documents/LipSync_Maker_Guide.docx index 6d1678d..02e97f7 100644 Binary files a/Documentation/Working_Documents/LipSync_Maker_Guide.docx and b/Documentation/Working_Documents/LipSync_Maker_Guide.docx differ diff --git a/README.md b/README.md index 24c3763..82af22f 100644 --- a/README.md +++ b/README.md @@ -105,12 +105,12 @@ The LipSync was designed by Neil Squire Society / Makers Making Change. The init The latest design (V4.0) incorporates feedback and suggestions from numerous users, clinicians, and volunteer makers. In particular, 4.0.AlphaII was tested by the following users: Omar Al-azawi, Don Danbrook, Ean Price, Jim Ryan and Kaileen Selig. V4.0 incorporates several commercially available open source hardware components: - - [Adafruit TLV493D Triple-Axis Magnetometer - STEMMA QT / Qwiic](https://www.adafruit.com/product/4366). The PCB design is available under a CC-BY-SA 4.0 license at https://github.com/adafruit/Adafruit-TLV493D-PCB. - - [Adafruit LPS33HW Water Resistant Pressure Sensor - STEMMA QT](https://www.adafruit.com/product/4414). The PCB design is available under a CC-BY-SA 4.0 license at https://github.com/adafruit/Adafruit-LPS3X-PCB. - - [Adafruit LPS22 Pressure Sensor - STEMMA QT / Qwiic - LPS22HB](https://www.adafruit.com/product/4633). The PCB design is available under a CC-BY-SA 4.0 license at https://github.com/adafruit/Adafruit-LPS2X-PCB. - - [Adafruit 128X64 monochrome OLED Display Board](https://www.adafruit.com/product/938). The PCB design is available under a CC-BY-SA 4.0 license at https://github.com/adafruit/Adafruit-128x64-Monochrome-OLED-PCB. + - [Adafruit TLV493D Triple-Axis Magnetometer - STEMMA QT / Qwiic](https://www.adafruit.com/product/4366). The PCB design is available under a CC-BY-SA 3.0 license at https://github.com/adafruit/Adafruit-TLV493D-PCB. + - [Adafruit LPS33HW Water Resistant Pressure Sensor - STEMMA QT](https://www.adafruit.com/product/4414). The PCB design is available under a CC-BY-SA 3.0 license at https://github.com/adafruit/Adafruit-LPS3X-PCB. + - [Adafruit LPS22 Pressure Sensor - STEMMA QT / Qwiic - LPS22HB](https://www.adafruit.com/product/4633). The PCB design is available under a CC-BY-SA 3.0 license at https://github.com/adafruit/Adafruit-LPS2X-PCB. + - [Adafruit 128X64 monochrome OLED Display Board](https://www.adafruit.com/product/938). The PCB design is available under a CC-BY-SA 3.0 license at https://github.com/adafruit/Adafruit-128x64-Monochrome-OLED-PCB. - [SparkFun Qwiic Adapter Board (DEV-14495)](https://www.sparkfun.com/products/14495). The PCB design is available under a CC-BY-SA 4.0 license at https://github.com/sparkfun/Qwiic_Adapter. - - [SparkFun RJ11 Breakout Board (BOB-14021)](https://www.sparkfun.com/products/14021). The PCB design is available under a CC-BY-SA 4.0 license at https://github.com/sparkfun/RJ11_Breakout. + - [SparkFun RJ11 Breakout Board (BOB-14021)](https://www.sparkfun.com/products/14021). The PCB design is available under a CC-BY-SA 3.0 license at https://github.com/sparkfun/RJ11_Breakout. The LipSync firmware utilizes the Arduino development platform, an open-source electronics platform based on easy-to-use hardware and software. Arduino is developed and maintained by the Arduino community, and the project wouldn't be possible without their contributions. Arduino is a registered trademark of Arduino AG. For more information about Arduino and to contribute to the community, visit the official Arduino website at www.arduino.cc. @@ -146,6 +146,7 @@ The LipSync has been certified as open source hardware by the Open Source Hardwa --- + ## About Makers Making Change [Makers Making Change Logo](https://www.makersmakingchange.com/) @@ -155,7 +156,7 @@ Makers Making Change leverages the capacity of community based Makers, Disabilit - Website: [www.MakersMakingChange.com](https://www.makersmakingchange.com/) - GitHub: [makersmakingchange](https://github.com/makersmakingchange) - - Twitter: [@makermakechange](https://twitter.com/makermakechange) + - Bluesky: [@makersmakingchange.bsky.social](https://bsky.app/profile/makersmakingchange.bsky.social) - Instagram: [@makersmakingchange](https://www.instagram.com/makersmakingchange) - Facebook: [makersmakechange](https://www.facebook.com/makersmakechange) - LinkedIn: [Neil Squire Society](https://www.linkedin.com/company/neil-squire-society/) @@ -164,3 +165,4 @@ Makers Making Change leverages the capacity of community based Makers, Disabilit ### Contact Us For technical questions, to get involved, or to share your experience we encourage you to [visit our website](https://www.makersmakingchange.com/) or [contact us](https://www.makersmakingchange.com/s/contact). + \ No newline at end of file