From 9124ad6a52a99c29b184cc3e5303d6bd1c54167d Mon Sep 17 00:00:00 2001 From: Ankit Karan Date: Mon, 11 Jan 2021 12:39:47 +0530 Subject: [PATCH] WiFi Jammer steps for Windows --- Windows/WifiJammer.txt | 52 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Windows/WifiJammer.txt diff --git a/Windows/WifiJammer.txt b/Windows/WifiJammer.txt new file mode 100644 index 0000000..e2d090e --- /dev/null +++ b/Windows/WifiJammer.txt @@ -0,0 +1,52 @@ +Step 1 + +Download the Node MCU Flasher from the link below for Windows 64 bit. + +Link: https://github.com/karanankit01/WifiJammer/blob/master/Windows/ESP8266Flasher.exe + +Step 2 + +Now Download the ESP8266 Deauther BIN Files (the wifi jammer code file) from the link below. + +Link: https://github.com/karanankit01/WifiJammer/blob/master/Windows/deauther_2.1.0_1mb.bin + +Step3 (Optional) + +Most of the windows have this driver but some have not. + +Download the CP210X driver zip file from the link below. +Then from zip file extrat the content and run the 64 bit exe file as administrator and install the driver. + +Step4 + +Now Click the icon of Node Mcu flasher file icon to launch the flasher window. +Now connect the Node MCU (esp8266) to the laptop using usb cable. +On the flasher window go to advance tab and select the setting. +Baudrate: 230400 +Flash size: 4MByte +Flash Speed 80MHz +SPI Mode: DIO + +Step 5 + +Now go to config tab and select the gear icon and select the bin file downloaded in step2 and open it. + +Step 6 + +Go to operation tab in flasher window and click on flash. +Wait for flashing until the green tick at the bootom comes up. + +Step 7 + +Now jammer is ready, to check it go to wifi and there will be a wifi showing with name "pwned". + +Step 8 + +Now connect to the "Pwned" on any device. Password is "deauther" +and then go to this ip address "192.168.4.1 + +Then start handling the wifi. +In SSIDs tab there you can create fake wifi network. +then in attack section start the Beacon. +Check the wifi available. +