diff --git a/firmware/common/max2831.c b/firmware/common/max2831.c
index 08e59a59f..d1d4b4673 100644
--- a/firmware/common/max2831.c
+++ b/firmware/common/max2831.c
@@ -425,3 +425,10 @@ void max2831_set_rx_hpf_frequency(max2831_driver_t* const drv, const max2831_rx_
 		break;
 	}
 }
+
+void max2831_select_temperature(max2831_driver_t* const drv)
+{
+	/* Switch to temperature sensor. */
+	set_MAX2831_RSSI_MUX(drv, MAX2831_RSSI_MUX_TEMP);
+	max2831_regs_commit(drv);
+}
diff --git a/firmware/common/max2831.h b/firmware/common/max2831.h
index f1a28c54f..5ac4dd20e 100644
--- a/firmware/common/max2831.h
+++ b/firmware/common/max2831.h
@@ -110,3 +110,4 @@ extern void max2831_tx(max2831_driver_t* const drv);
 extern void max2831_rx(max2831_driver_t* const drv);
 extern void max2831_tx_calibration(max2831_driver_t* const drv);
 extern void max2831_rx_calibration(max2831_driver_t* const drv);
+extern void max2831_select_temperature(max2831_driver_t* const drv);
diff --git a/firmware/common/max2837.c b/firmware/common/max2837.c
index f512c6af8..e98a09d92 100644
--- a/firmware/common/max2837.c
+++ b/firmware/common/max2837.c
@@ -52,7 +52,7 @@ static const uint16_t max2837_regs_default[MAX2837_NUM_REGS] = {
 	0x006, /* 6 */
 	0x000, /* 7 */
 	0x080, /* 8 */
-	0x018, /* 9 */
+	0x01a, /* 9 */
 	0x058, /* 10 */
 	0x016, /* 11 */
 	0x24f, /* 12 */
@@ -393,3 +393,10 @@ bool max2837_set_txvga_gain(max2837_driver_t* const drv, const uint32_t gain_db)
 	max2837_reg_commit(drv, 29);
 	return true;
 }
+
+void max2837_select_temperature(max2837_driver_t* const drv)
+{
+	/* Switch to temperature sensor. */
+	set_MAX2837_RSSI_MUX(drv, MAX2837_RSSI_MUX_TEMP);
+	max2837_regs_commit(drv);
+}
diff --git a/firmware/common/max2837.h b/firmware/common/max2837.h
index a33179acf..4df4383db 100644
--- a/firmware/common/max2837.h
+++ b/firmware/common/max2837.h
@@ -93,3 +93,4 @@ bool max2837_set_txvga_gain(max2837_driver_t* const drv, const uint32_t gain_db)
 
 extern void max2837_tx(max2837_driver_t* const drv);
 extern void max2837_rx(max2837_driver_t* const drv);
+extern void max2837_select_temperature(max2837_driver_t* const drv);
diff --git a/firmware/common/max2837_regs.def b/firmware/common/max2837_regs.def
index 67eb6dd7c..7e060833c 100644
--- a/firmware/common/max2837_regs.def
+++ b/firmware/common/max2837_regs.def
@@ -150,7 +150,7 @@ __MREG__(MAX2837_RSSI_MODE,6,8,1)    // set to override RXHP pin
 __MREG__(MAX2837_LPF_MODE_SEL,6,9,1) // set to enable mode in reg 2 ModeCtrl
 
 /* REG 7 is R/O */
-// D4:0 ts_adc (temp sensor)
+__MREG__(MAX2837_TEMP_VALUE,0,4,5)      // temp sensor value
 // D9:5 zeros or test outputs
 
 /* REG 8 */
@@ -162,8 +162,8 @@ __MREG__(MAX2837_BIAS_TRIM_CNTRL,8,8,1) // enable BIAS_TRIM_SPI value
 __MREG__(MAX2837_RX_IQERR_SPI_EN,8,9,1) // ???
 
 /* REG 9 */
-__MREG__(MAX2837_ts_adc_trigger,9,0,1)  // temp sensor trigger (one shot)
-__MREG__(MAX2837_ts_en,9,1,1)           // temp sensor enable (before trigger)
+__MREG__(MAX2837_TEMP_TRIGGER,9,0,1)    // temp sensor trigger (one shot)
+__MREG__(MAX2837_TEMP_ENABLE,9,1,1)     // temp sensor enable (before trigger)
 __MREG__(MAX2837_LPFtrim_SPI_EN,9,2,1)
 __MREG__(MAX2837_DOUT_DRVH,9,3,1)
 #define MAX2837_DOUT_DRVH_1X 0
diff --git a/firmware/common/max2839.c b/firmware/common/max2839.c
index a938b733b..7ffb692fc 100644
--- a/firmware/common/max2839.c
+++ b/firmware/common/max2839.c
@@ -55,7 +55,7 @@ static const uint16_t max2839_regs_default[MAX2839_NUM_REGS] = {
 	0x000,  /* 6 */
 	0x208,  /* 7 */
 	0x220,  /* 8:  data sheet says 0x220 but read 0x000 */
-	0x018,  /* 9 */
+	0x01a,  /* 9 */
 	0x00c,  /* 10 */
 	0x004,  /* 11: data sheet says 0x004 but read 0x000 */
 	0x24f,  /* 12 */
@@ -456,3 +456,10 @@ bool max2839_set_txvga_gain(max2839_driver_t* const drv, const uint32_t gain_db)
 	max2839_reg_commit(drv, 29);
 	return true;
 }
+
+void max2839_select_temperature(max2839_driver_t* const drv)
+{
+	/* Switch to temperature sensor. */
+	set_MAX2839_RSSI_MUX(drv, MAX2839_RSSI_MUX_TEMP);
+	max2839_regs_commit(drv);
+}
diff --git a/firmware/common/max2839.h b/firmware/common/max2839.h
index 6430ce371..d1413a510 100644
--- a/firmware/common/max2839.h
+++ b/firmware/common/max2839.h
@@ -95,3 +95,4 @@ bool max2839_set_txvga_gain(max2839_driver_t* const drv, const uint32_t gain_db)
 
 extern void max2839_tx(max2839_driver_t* const drv);
 extern void max2839_rx(max2839_driver_t* const drv);
+extern void max2839_select_temperature(max2839_driver_t* const drv);
diff --git a/firmware/common/max2839_regs.def b/firmware/common/max2839_regs.def
index 11b1d80d9..04d0f3585 100644
--- a/firmware/common/max2839_regs.def
+++ b/firmware/common/max2839_regs.def
@@ -119,8 +119,10 @@ __MREG__(MAX2839_RX_VCM,6,9,2)
 
 /* REG 7 */
 __MREG__(MAX2839_RESERVED_7_0,7,0,1)
-__MREG__(MAX2839_RSSIselect,7,1,1)
-__MREG__(MAX2839_RSSImode,7,2,1)
+__MREG__(MAX2839_RSSI_MUX,7,1,1)
+#define MAX2839_RSSI_MUX_RSSI 0
+#define MAX2839_RSSI_MUX_TEMP 1
+__MREG__(MAX2839_RSSI_MODE,7,2,1)
 __MREG__(MAX2839_RESERVED_7_6,7,6,4)
 __MREG__(MAX2839_RXBBI_RXBBQ,7,7,1)
 __MREG__(MAX2839_RESERVED_7_8,7,8,1)
@@ -133,8 +135,8 @@ __MREG__(MAX2839_LPFmode_SPI,8,2,1)
 __MREG__(MAX2839_RESERVED_8_9,8,9,7)
 
 /* REG 9 */
-__MREG__(MAX2839_Temperature_ADC,9,0,1)
-__MREG__(MAX2839_Temperature_Clk_En,9,1,1)
+__MREG__(MAX2839_TEMP_TRIGGER,9,0,1)
+__MREG__(MAX2839_TEMP_ENABLE,9,1,1)
 __MREG__(MAX2839_RESERVED_9_2,9,2,1)
 __MREG__(MAX2839_DOUT_Drive_Sel,9,3,1)
 __MREG__(MAX2839_DOUT_3state_Ctrl,9,4,1)
diff --git a/firmware/common/max283x.c b/firmware/common/max283x.c
index f9486921d..9509c56dc 100644
--- a/firmware/common/max283x.c
+++ b/firmware/common/max283x.c
@@ -28,6 +28,8 @@
 
 #include <libopencm3/lpc43xx/ssp.h>
 
+#include "adc.h"
+#include "delay.h"
 #include "fixed_point.h"
 #include "platform_detect.h"
 #include "platform_gpio.h"
@@ -329,3 +331,24 @@ void max283x_rx_calibration(max283x_driver_t* const drv)
 {
 	PRALINE_ONLY(drv, max2831_rx_calibration(&drv->drv.max2831));
 }
+
+/* Get chip temperature. */
+int8_t max283x_temperature(max283x_driver_t* const drv)
+{
+	/* Switch to temperature sensor. */
+	CALL(drv, select_temperature);
+
+	/* Wait for output to settle. */
+	delay_ms(1);
+
+	/* Read temperature. */
+	uint16_t value = adc_read(1);
+
+	/* Convert to degrees C, using:
+	 * ADC 0 = 0V, ADC 1023 = 3.3V
+	 * Analog 0.35V = -40C, 1.6V = +85C
+	 * Offset adjusted empirically. */
+	const int32_t prescale = 3332, offset = 928500, divisor = 10000;
+
+	return ((value * prescale) - offset) / divisor;
+}
diff --git a/firmware/common/max283x.h b/firmware/common/max283x.h
index 7c9c03dd3..68a569b73 100644
--- a/firmware/common/max283x.h
+++ b/firmware/common/max283x.h
@@ -140,6 +140,9 @@ void max283x_set_rx_hpf_frequency(
 void max283x_tx_calibration(max283x_driver_t* const drv);
 void max283x_rx_calibration(max283x_driver_t* const drv);
 
+/* Get chip temperature. */
+int8_t max283x_temperature(max283x_driver_t* const drv);
+
 /* Driver instance. */
 extern ssp_config_t ssp_config_max283x;
 extern max283x_driver_t max283x;
diff --git a/firmware/hackrf_usb/hackrf_usb.c b/firmware/hackrf_usb/hackrf_usb.c
index 813a94539..d0c09c612 100644
--- a/firmware/hackrf_usb/hackrf_usb.c
+++ b/firmware/hackrf_usb/hackrf_usb.c
@@ -182,6 +182,7 @@ static usb_request_handler_fn vendor_request_handler[] = {
 	usb_vendor_request_write_radio_reg,
 	usb_vendor_request_read_radio_reg,
 	usb_vendor_request_get_buffer_size,
+	usb_vendor_request_read_temperature,
 };
 
 static const uint32_t vendor_request_handler_count =
diff --git a/firmware/hackrf_usb/usb_api_selftest.c b/firmware/hackrf_usb/usb_api_selftest.c
index 7fde6f687..126ee2962 100644
--- a/firmware/hackrf_usb/usb_api_selftest.c
+++ b/firmware/hackrf_usb/usb_api_selftest.c
@@ -30,6 +30,7 @@
 #include <libopencm3/lpc43xx/cgu.h>
 #include <libopencm3/lpc43xx/creg.h>
 
+#include <max283x.h>
 #include <platform_detect.h>
 #include <selftest.h>
 #include <usb_queue.h>
@@ -266,3 +267,20 @@ usb_request_status_t usb_vendor_request_test_rtc_osc(
 		return USB_REQUEST_STATUS_OK;
 	}
 }
+
+usb_request_status_t usb_vendor_request_read_temperature(
+	usb_endpoint_t* const endpoint,
+	const usb_transfer_stage_t stage)
+{
+	if (stage == USB_TRANSFER_STAGE_SETUP) {
+		endpoint->buffer[0] = max283x_temperature(&max283x);
+		usb_transfer_schedule_block(
+			endpoint->in,
+			&endpoint->buffer,
+			1,
+			NULL,
+			NULL);
+		usb_transfer_schedule_ack(endpoint->out);
+	}
+	return USB_REQUEST_STATUS_OK;
+}
diff --git a/firmware/hackrf_usb/usb_api_selftest.h b/firmware/hackrf_usb/usb_api_selftest.h
index 7f5af7dab..22ebb3eec 100644
--- a/firmware/hackrf_usb/usb_api_selftest.h
+++ b/firmware/hackrf_usb/usb_api_selftest.h
@@ -31,3 +31,7 @@ usb_request_status_t usb_vendor_request_read_selftest(
 usb_request_status_t usb_vendor_request_test_rtc_osc(
 	usb_endpoint_t* const endpoint,
 	const usb_transfer_stage_t stage);
+
+usb_request_status_t usb_vendor_request_read_temperature(
+	usb_endpoint_t* const endpoint,
+	const usb_transfer_stage_t stage);
diff --git a/host/hackrf-tools/src/hackrf_info.c b/host/hackrf-tools/src/hackrf_info.c
index e214ec927..59961a544 100644
--- a/host/hackrf-tools/src/hackrf_info.c
+++ b/host/hackrf-tools/src/hackrf_info.c
@@ -260,6 +260,18 @@ int main(void)
 		}
 #endif /* HACKRF_ISSUE_609_IS_FIXED */
 
+		if (usb_version >= 0x0113) {
+			int8_t temperature;
+			result = hackrf_read_temperature(device, &temperature);
+			if (result != HACKRF_SUCCESS) {
+				printf("hackrf_read_temperature() failed: %s (%d)\n",
+				       hackrf_error_name(result),
+				       result);
+				return EXIT_FAILURE;
+			}
+			printf("Transceiver temperature: %-d°C\n", temperature);
+		}
+
 		if (usb_version >= 0x0109) {
 			hackrf_selftest selftest;
 			result = hackrf_read_selftest(device, &selftest);
diff --git a/host/libhackrf/src/hackrf.c b/host/libhackrf/src/hackrf.c
index 7bafd5f39..0f67f3430 100644
--- a/host/libhackrf/src/hackrf.c
+++ b/host/libhackrf/src/hackrf.c
@@ -120,6 +120,7 @@ typedef enum {
 	HACKRF_VENDOR_REQUEST_RADIO_WRITE_REG = 59,
 	HACKRF_VENDOR_REQUEST_RADIO_READ_REG = 60,
 	HACKRF_VENDOR_REQUEST_GET_BUFFER_SIZE = 61,
+	HACKRF_VENDOR_REQUEST_READ_TEMPERATURE = 62,
 } hackrf_vendor_request;
 
 #define USB_CONFIG_STANDARD 0x1
@@ -1415,6 +1416,28 @@ int ADDCALL hackrf_test_rtc_osc(hackrf_device* device, bool* pass)
 	return HACKRF_SUCCESS;
 }
 
+int ADDCALL hackrf_read_temperature(hackrf_device* device, int8_t* temp)
+{
+	USB_API_REQUIRED(device, 0x0113);
+
+	int result = libusb_control_transfer(
+		device->usb_device,
+		LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
+		HACKRF_VENDOR_REQUEST_READ_TEMPERATURE,
+		0,
+		0,
+		(unsigned char*) temp,
+		1,
+		DEFAULT_REQUEST_TIMEOUT);
+
+	if (result < 1) {
+		last_libusb_error = result;
+		return HACKRF_ERROR_LIBUSB;
+	} else {
+		return HACKRF_SUCCESS;
+	}
+}
+
 int ADDCALL hackrf_read_adc(hackrf_device* device, uint8_t adc_channel, uint16_t* value)
 {
 	USB_API_REQUIRED(device, 0x0109);
diff --git a/host/libhackrf/src/hackrf.h b/host/libhackrf/src/hackrf.h
index eeca65e03..d9322d3c2 100644
--- a/host/libhackrf/src/hackrf.h
+++ b/host/libhackrf/src/hackrf.h
@@ -1375,6 +1375,16 @@ extern ADDAPI int ADDCALL hackrf_read_selftest(
  */
 extern ADDAPI int ADDCALL hackrf_test_rtc_osc(hackrf_device* device, bool* pass);
 
+/**
+ * Read the temperature of the device
+ *
+ * @param[in] device device to query
+ * @param[out] temp Temperature in degrees C
+ * @return @ref HACKRF_SUCCESS on success or @ref hackrf_error variant
+ * @ingroup debug
+ */
+extern ADDAPI int ADDCALL hackrf_read_temperature(hackrf_device* device, int8_t* temp);
+
 /**
  * Read a value from an ADC channel
  *