Individual Heater support

[blueflame66]

Hi, firstly thank you for the great integration. It is much better here where updates can be posted on a timely basis.

I am wondering if you can update it to deal with individual heaters. My remote vacation home installation has two heaters... a heat pump and a gas heater. On the Hayward Omnilogic app, under heaters, I simply see All Heaters with an on/off switch and below a setpoint for the water temperature. If I click on the priority change button, then I see my two individual heaters where I can change priority but more importantly, turn on or off the individual heaters. Based on the conditions I may only want one heater active or both. After installing the integration, I see two water heaters representing each of my heaters. The setpoint for either water heater changes the overall setpoint of the pool ... which is fine because Omnilogic only allows a single setpoint. However, if I change either water heater to on, it turns on the switch for all heaters, not the individual heater. Therefore although I have control over the overall 'virtual' heater turning on/off and its setpoint, I do not have control over each individual heater. I have added my telemetry files per your instructions, but I am unsure if I did it right.

Thanks in advance.
Glenn

Telemetry xml
</STATUS

Telemetry Json
[{'systemId': 'REDACTED', 'statusVersion': '9', 'airTemp': '39', 'status': '1', 'state': '1', 'configUpdatedTime': '2022-11-27T14:52:19.875Z', 'datetime': '2022-11-27T08:06:37.6989489', 'Relays': [{'systemId': '11', 'relayState': '0', 'Name': 'Mister', 'Type': 'RLY_HIGH_VOLTAGE_RELAY', 'Function': 'RLY_ACCESSORY', 'Alarms': []}], 'BOWS': [{'systemId': '1', 'flow': '255', 'waterTemp': '58', 'Name': 'Pool', 'Supports-Spillover': 'no', 'Filter': {'systemId': '2', 'valvePosition': '1', 'filterSpeed': '77', 'filterState': '1', 'lastSpeed': '19', 'Name': 'Filter Pump', 'Shared-Type': 'BOW_NO_EQUIPMENT_SHARED', 'Filter-Type': 'FMT_VARIABLE_SPEED_PUMP', 'Max-Pump-Speed': '100', 'Min-Pump-Speed': '19', 'Max-Pump-RPM': '3250', 'Min-Pump-RPM': '600', 'Priming-Enabled': 'yes', 'Alarms': []}, 'VirtualHeater': {'systemId': '3', 'Current-Set-Point': '85', 'enable': 'yes'}, 'Heater': {'systemId': '5', 'heaterState': '1', 'enable': 'yes', 'Shared-Type': 'BOW_NO_EQUIPMENT_SHARED', 'Operation': {'VirtualHeater': {'System-Id': '5', 'Name': 'Gas Heater', 'Type': 'PET_HEATER', 'Heater-Type': 'HTR_GAS', 'Enabled': 'yes', 'Priority': 'HTR_PRIORITY_2', 'Run-For-Priority': 'HTR_MAINTAINS_PRIORITY_FOR_NEVER', 'Shared-Equipment-System-ID': '-1', 'Current-Set-Point': '85', 'Max-Water-Temp': '104', 'Min-Settable-Water-Temp': '55', 'Max-Settable-Water-Temp': '98', 'enable': 'yes', 'systemId': '3'}}, 'Name': 'Gas Heater', 'Alarms': []}, 'CSAD': {'systemId': '0', 'ph': '', 'orp': '', 'status': '0', 'mode': '0', 'Alarms': []}, 'Group': {'systemId': '18', 'groupState': '0'}, 'Lights': [{'systemId': '7', 'lightState': '0', 'currentShow': '10', 'Name': 'Light', 'Type': 'CL_P_COLOR', 'V2': 'no', 'Alarms': []}], 'Relays': [{'systemId': '6', 'relayState': '0', 'Name': 'Water Ft', 'Type': 'RLY_VALVE_ACTUATOR', 'Function': 'RLY_WATER_FEATURE', 'Alarms': []}], 'Pumps': [], 'Heaters': [{'systemId': '4', 'heaterState': '0', 'enable': 'yes', 'Shared-Type': 'BOW_NO_EQUIPMENT_SHARED', 'Operation': {'VirtualHeater': {'System-Id': '4', 'Name': 'Heat Pump', 'Type': 'PET_HEATER', 'Heater-Type': 'HTR_HEAT_PUMP', 'Enabled': 'yes', 'Priority': 'HTR_PRIORITY_1', 'Run-For-Priority': 'HTR_MAINTAINS_PRIORITY_FOR_NEVER', 'Shared-Equipment-System-ID': '-1', 'Current-Set-Point': '85', 'Max-Water-Temp': '104', 'Min-Settable-Water-Temp': '55', 'Max-Settable-Water-Temp': '98', 'enable': 'yes', 'systemId': '3'}}, 'Name': 'Heat Pump', 'Alarms': []}, {'systemId': '5', 'heaterState': '1', 'enable': 'yes', 'Shared-Type': 'BOW_NO_EQUIPMENT_SHARED', 'Operation': {'VirtualHeater': {'System-Id': '5', 'Name': 'Gas Heater', 'Type': 'PET_HEATER', 'Heater-Type': 'HTR_GAS', 'Enabled': 'yes', 'Priority': 'HTR_PRIORITY_2', 'Run-For-Priority': 'HTR_MAINTAINS_PRIORITY_FOR_NEVER', 'Shared-Equipment-System-ID': '-1', 'Current-Set-Point': '85', 'Max-Water-Temp': '104', 'Min-Settable-Water-Temp': '55', 'Max-Settable-Water-Temp': '98', 'enable': 'yes', 'systemId': '3'}}, 'Name': 'Gas Heater', 'Alarms': []}]}], 'BackyardName': 'REDACTED', 'Msp-Vsp-Speed-Format': 'RPM', 'Msp-Time-Format': '12 Hour Format', 'Units': 'Standard', 'Msp-Chlor-Display': 'Salt', 'Msp-Language': 'English', 'Unit-of-Measurement': 'Standard', 'Alarms': [], 'Unit-of-Temperature': 'UNITS_FAHRENHEIT'}]

Msp config
RPM12 Hour FormatStandardSaltEnglishstandardYesYesYesYes
MSP Configuration
0Backyard09AirSensorSENSOR_AIR_TEMPUNITS_FAHRENHEIT11MisterRLY_HIGH_VOLTAGE_RELAYRLY_ACCESSORY
01
1PoolBOW_POOLBOW_NO_EQUIPMENT_SHAREDSHARED_EQUIPMENT_LOW_PRIORITY0no120002Filter PumpBOW_NO_EQUIPMENT_SHAREDFMT_VARIABLE_SPEED_PUMP100193250600yes1950100072003BOW_NO_EQUIPMENT_SHAREDyes85881045598
PEO_HEATER_EQUIPMENT
4Heat PumpPET_HEATERHTR_HEAT_PUMPyesHTR_PRIORITY_1HTR_MAINTAINS_PRIORITY_FOR_NEVER-1
PEO_HEATER_EQUIPMENT
5Gas HeaterPET_HEATERHTR_GASyesHTR_PRIORITY_2HTR_MAINTAINS_PRIORITY_FOR_NEVER-16Water FtRLY_VALVE_ACTUATORRLY_WATER_FEATURE757LightCL_P_COLOR10WaterSensorSENSOR_WATER_TEMPUNITS_FAHRENHEIT121316477106015127116141641011601912711715164263171001902212711319164881001032113201648810010321171160268435455116Mist114TurnOnOffForGroup01110TurnOnOffForGroup1200SetHeaterScheduleCmd13550000000SetUITemporaryHeaterPriorityCmd145-1-1-1SetUITemporaryHeaterMaintainPriorityCmd1300255255255SetUITemporaryHeaterEnable130SetUITemporaryHeaterEnable140SetUITemporaryHeaterEnable150SetSolarScheduleCmd13550000000TurnOnOffForGroup1600TurnOnOffForGroup17263178018Swim Lights167200TurnOnOffForGroup01100TurnOnOffForGroup12190SetHeaterScheduleCmd13860000000SetUITemporaryHeaterPriorityCmd145-1-1-1SetUITemporaryHeaterMaintainPriorityCmd1300255255255SetUITemporaryHeaterEnable130SetUITemporaryHeaterEnable140SetUITemporaryHeaterEnable150SetSolarScheduleCmd13870000000TurnOnOffForGroup1600TurnOnOffForGroup172631711

[djtimca]

Just coming around to this now - what happens with the integration today? I thought the platform would just iterate through entities of a type, so you should wind up with individual heaters. Unless they are buried in some weird Hayward nested virtual structure, in which case this might be very challenging through the APIs.

[djtimca]

If you can pull the diagnostic data from the integration on the latest release as well and attach it here it would be helpful. It will have the latest data structures that way as well.

[blueflame66]

Hi, attached is the diagnostic data. I hope this helps.

…

On Tue, Aug 5, 2025 at 5:20 PM djtimca ***@***.***> wrote: *djtimca* left a comment (djtimca/haomnilogic#39) <#39 (comment)> If you can pull the diagnostic data from the integration on the latest release as well and attach it here it would be helpful. It will have the latest data structures that way as well. — Reply to this email directly, view it on GitHub <#39 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFOQZSLEO2UW4OZM4LBI4HL3MFC3VAVCNFSM6AAAAACCVJLLICVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTCNJXGAYTINBYGI> . You are receiving this because you authored the thread.Message ID: ***@***.***>

-- *Glenn Moore* BASc | MASc | MBA | PEng

[djtimca]

@blueflame66 unfortunately the data didn't attach to the issue in GitHub from the email. You may need to attach it using the web if you view the issue on GitHub.

[blueflame66]

HI, I will try this again. I am now on the web site of the issue . Let me know if that works :-)

config_entry-omnilogic-a5eb973c3f3c101f0c02700aa010626b.json

[djtimca]

Thanks - can read this one. I've engaged Hayward for help - based on what I'm seeing it should only be triggering one heater, but I'm not sure what the capabilities of the underlying API are that might be limiting it. Stay tuned.

[blueflame66]

Thanks! Yea i guess my setup is unusual as I have a gas and a heat pump heater. Glenn

…

On Wed, Aug 13, 2025 at 8:39 AM Tim Empringham ***@***.***> wrote: *djtimca* left a comment (djtimca/haomnilogic#39) <#39 (comment)> Thanks - can read this one. I've engaged Hayward for help - based on what I'm seeing it should only be triggering one heater, but I'm not sure what the capabilities of the underlying API are that might be limiting it. Stay tuned. — Reply to this email directly, view it on GitHub <#39 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFOQZSIPDU42SYIPCB7HF333NNL3BAVCNFSM6AAAAACCVJLLICVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTCOBUGQZTKMZRGE> . You are receiving this because you were mentioned.Message ID: ***@***.***>

-- *Glenn Moore* BASc | MASc | MBA | PEng