[BUG] - Constant Flapping to Unavailable (possibly same as #234)

[jacobidsmith]

Is there an existing issue for this?

• I have searched the existing issues

• I have added diagnostic data file as an upload at the end of the form or. I understand that the ability to assist IS limited without it (please upload diagnostics if at all possible).

• I have either added debug logs or to the section marked "Debug Logs" or attached the debug log file as an upload at the end of the form. I understand that the ability to assist IS limited without it (add debug logs if at all possible).

Bug Description

The integration for all entities flaps back and forth from unavailable to the proper status. I suspect this is similar to #234. This is on wifi, ethernet not possible. If possible I'd like to be able to hold the current status through more retries. As it stands most of the unavailable statuses resolve within 120 seconds.

Reproduction Steps

...

Debug Logs

How is your OmniLogic connected to the network?

Wi-Fi

Attachments

config_entry-omnilogic_local-01KJ4F5DQ4J8MSTVHHVTA9P3H4.json
Screenshot 2026-07-13 102531.jpg
home-assistant_omnilogic_local_2026-07-13T14-43-14.901Z.log

[jacobidsmith]

I was able to run a temporary ethernet cable and this issue is resolved using ethernet. It only happens on WiFi.