[BUG] - Service not connecting

[RickyB9000]

Is there an existing issue for this?

• I have searched the existing issues

• I have added diagnostic data file as an upload at the end of the form or. I understand that the ability to assist IS limited without it (please upload diagnostics if at all possible).

• I have either added debug logs or to the section marked "Debug Logs" or attached the debug log file as an upload at the end of the form. I understand that the ability to assist IS limited without it (add debug logs if at all possible).

Bug Description

Setup failed - was working earlier this morning. Don't see an option for diagnostic data.

Reproduction Steps

1. Open HA - all entities are unavailable.

...

Debug Logs

How is your OmniLogic connected to the network?

Wi-Fi

Attachments

home-assistant_omnilogic_local_2026-06-28T12-58-05.139Z.log

[RickyB9000]

The issue went away, but this is the second time it has happened in a few weeks... let me know if you need anything else.

[RickyB9000]

Happened again this afternoon....

[RickyB9000]

This happened a few times this week and it sometimes takes a few hours for it to "reconnect" by itself.

[djrobx]

Mine is doing this currently too

[djrobx]

Good news, since I run out of my own fork to get usable HomeKit temperature control, and I have Codex, it was able to analyze the broken state while it was happening. The controller returns compressed packets and uses Zlib to decode them. But it was stripping off 0 byte padding at the end of packets. The problem is that the zero byte may be a legitimate part of the compressed packet, so Zlib barfs with -5 until the response changes.

The headers contain a MsgSize that should be used to frame the buffer. Codex raised a PR for you.

cryptk/python-omnilogic-local#153