Fona 3g

[oaf2015]

After running the piphone.py file, I could see the keypad but nothing happens on putty after main loop. Line 312 to be exact. Any recommendations?

[joeblankenship1]

Did the calibration test work for the touch screen?

[oaf2015]

Yes it did. I am able to put in numbers, delete, and even hit call but nothing happens. On the terminal while logged in ssh I see an error right at the calling line on mainloop.

…

On Mar 24, 2017 12:26 AM, "Joe Blankenship" ***@***.***> wrote: Did the calibration test work for the touch screen? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AUG5GPOKcpLxTpdm0iX2UbJWpekY7ak0ks5ro0XsgaJpZM4Ml2-8> .

[oaf2015]

I am wondering if it has anything to do with AT commands and having to preconfigure the fona 3G prior to finalizing it with raspberry pi 3.

…

On Mar 24, 2017 11:58 AM, "john smith" ***@***.***> wrote: Yes it did. I am able to put in numbers, delete, and even hit call but nothing happens. On the terminal while logged in ssh I see an error right at the calling line on mainloop. On Mar 24, 2017 12:26 AM, "Joe Blankenship" ***@***.***> wrote: > Did the calibration test work for the touch screen? > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#2 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AUG5GPOKcpLxTpdm0iX2UbJWpekY7ak0ks5ro0XsgaJpZM4Ml2-8> > . >

[climberhunt]

use minicom to talk to the FONA, and issue a few AT commands, try dialling a number "ATDT..." etc..
The SIM may be blocked, you might need to enter a PIN code. There's an AT code for that, I think. I seem to recall having to do that for one of my SIMs but nor all of them.

[oaf2015]

Sim is not locked. ATD plus number. Do you have an example of the complete calling command. Minicom talks fine with fona no issues there

…

On Mar 24, 2017 1:00 PM, "Dave Hunt" ***@***.***> wrote: use minicom to talk to the FONA, and issue a few AT commands, try dialling a number "ATDT..." etc.. The SIM may be blocked, you might need to enter a PIN code. There's an AT code for that, I think. I seem to recall having to do that for one of my SIMs but nor all of them. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AUG5GHUuFKFvL0Gs81d-KNUnEMPnj_B7ks5ro_aZgaJpZM4Ml2-8> .

[climberhunt]

I'm afraid I haven't had a functioning PiPhone here for the last couple of years, my Fona module is in my front gates to open/close them, so I can't test it....

[oaf2015]

So don't even try it?

…

On Mar 25, 2017 5:57 AM, "Dave Hunt" ***@***.***> wrote: I'm afraid I haven't had a functioning PiPhone here for the last couple of years, my Fona module is in my front gates to open/close them, so I can't test it.... — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AUG5GF7knSmROEmN7luy_kBEJuMa4IySks5rpOUJgaJpZM4Ml2-8> .

[joeblankenship1]

@oaf2015 I still have my PiPhone built, but I'm currently slammed with work projects. Did you need this test ran for work or for hobby? If it's work related, I'll try to get to it this week.

[oaf2015]

Work.

…

On Mar 27, 2017 10:11 AM, "Joe Blankenship" ***@***.***> wrote: @oaf2015 <https://github.com/oaf2015> I still have my PiPhone built, but I'm currently slammed with work projects. Did you need this test ran for work or for hobby? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#2 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AUG5GMGC-h9DEooPNNSLUYlqbsEdPRlOks5rp8OJgaJpZM4Ml2-8> .

[oaf2015]

I really appreciate your help. I have gone through and attempted to identify AT commands comparisons but found none. I did have to change the serial.port to ttyS0 and it is communicating good. My sticking point right now is the fact that it is incapable of delivering the call or receive calls. On putty I see an error when I attempt to make a call. On the device (pitft) it says calling....

…

On Mar 27, 2017 6:40 PM, wrote: Work. On Mar 27, 2017 10:11 AM, "Joe Blankenship" ***@***.***> wrote: > @oaf2015 <https://github.com/oaf2015> I still have my PiPhone built, but > I'm currently slammed with work projects. Did you need this test ran for > work or for hobby? > > — > You are receiving this because you were mentioned. > Reply to this email directly, view it on GitHub > <#2 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AUG5GMGC-h9DEooPNNSLUYlqbsEdPRlOks5rp8OJgaJpZM4Ml2-8> > . >

[joeblankenship1]

I will test my PiPhone ASAP to validate your issues. I don't think I was able to receive calls; I was only ever able to dial out. I just hope I still have minutes on my SIM.

[oaf2015]

Thank you.

…

On Mar 28, 2017 9:19 AM, "Joe Blankenship" ***@***.***> wrote: I will test my PiPhone ASAP to validate your issues. I don't think I was able to receive calls; I was only ever able to dial out. I just hope I still have minutes on my SIM. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#2 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AUG5GGS3S4W5Yi6ltGJhgvMWyWlA7COPks5rqQjdgaJpZM4Ml2-8> .

[joeblankenship1]

@oaf2015 I haven't forgot about you; I've just been really busy. Hopefully, you've already found a solution.

[oaf2015]

No, not yet. I appreciate. I am getting back on it Monday.

…

On Apr 7, 2017 11:55 PM, "Joe Blankenship" ***@***.***> wrote: @oaf2015 <https://github.com/oaf2015> I haven't forgot about you; I've just been really busy. Hopefully, you've already found a solution. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#2 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AUG5GJcfThTT8nQjSMNnqTxXWHWiwDYGks5rtwVMgaJpZM4Ml2-8> .

[Ericka430]

I'm trying to do this project for my senior project class and i keep getting an error that says List index out of range, what can I do to fix this?