Hi,
Thank you very much for your work.
Here is a report from my Copper SB - Single phase setup. I am using a ESP32 S3 N16R8 without external antenna for the moment, card is about 1m away from the charger.
Wallbox Gateway — Compatibility Report
Charger: prj10-copper-business-pm3 (model: fill in, e.g. Pulsar MAX / Plus / Copper SB)
Charger firmware: 6.7.38
BLE module: u-blox NINA-B22 (fw 4.0.0-003)
Gateway firmware: v3.2.0-beta.6-dirty
BAPI read-method support:
fw_v_ ok
r_dat ok
r_sta ok
r_dca ok
r_schs ok
g_ecos ok
g_alo ok
g_psh ok
g_phsw ok
g_tzn ok
r_not ok
r_ses ok
r_lse ok
read_pin ok
r_wel ok
g_mac ok
g_ocpp ok
GATT topology:
svc 0x1801
chr 0x2a05 [I]
svc 0x1800
chr 0x2a00 [R]
chr 0x2a01 [R]
chr 0x2a04 [R]
svc 0x180a
chr 0x2a29 [R]
chr 0x2a24 [R]
chr 0x2a26 [R]
chr 0x2a28 [R]
svc 2456e1b9-26e2-8f83-e744-f34f01e9d701
chr 2456e1b9-26e2-8f83-e744-f34f01e9d703 [RWwN]
chr 2456e1b9-26e2-8f83-e744-f34f01e9d704 [WwN]
What works / what doesn’t: (describe — e.g. connects but no data, schedules won’t delete, etc.)
Dashboard:
- Max current : can set-up the current but when I get back to the dashboard, it does not update and says 32A.
- Energy flow : somewhat works - grid says "--" - shows solar even if not set
- Statuses : everything is blank "--"
Settings:
- Schedules : I have none so not tested at the moment
- Heatmap : Shows nothing
- Power : Energy meter only reports "Current L1"
- Charger : Only reports WiFi - Ethernet missing
Info / Overview:
- Charger Details : Ethernet missing
Info / Tools:
- Network status : Ethernet missing
- WiFi Status : only says "[object Object]"
Edit:
FYI, I also tried the HA integration but I get an error " 'NoneType' object has no attribute 'get' ".
Please, let me know if you would like other data.
Hi,
Thank you very much for your work.
Here is a report from my Copper SB - Single phase setup. I am using a ESP32 S3 N16R8 without external antenna for the moment, card is about 1m away from the charger.
Wallbox Gateway — Compatibility Report
Charger: prj10-copper-business-pm3 (model: fill in, e.g. Pulsar MAX / Plus / Copper SB)
Charger firmware: 6.7.38
BLE module: u-blox NINA-B22 (fw 4.0.0-003)
Gateway firmware: v3.2.0-beta.6-dirty
BAPI read-method support:
GATT topology:
What works / what doesn’t: (describe — e.g. connects but no data, schedules won’t delete, etc.)
Dashboard:
Settings:
Info / Overview:
Info / Tools:
Edit:
FYI, I also tried the HA integration but I get an error " 'NoneType' object has no attribute 'get' ".
Please, let me know if you would like other data.