Add ESP32 Marauder V8 support

[H4W9]

Are you planning on adding support for Koko's new ESP32 Marauder V8?

[bmorcelli]

Yes, whenever I have enough information about the board I'll work on a version for it..

Until now theres no public information on his repo about it

[bmorcelli]

Do you have the V8 board?

If so, can you test the Beta version I made?

https://bmorcelli.github.io/Launcher/webflasher.html

Beta Release -> Custom -> Marauder V8

[H4W9]

I do have one... I'll check it out!

[H4W9]

I get this message when I try flashing with webflasher.

Your ESP32-C5 board is not supported by this firmware.

I am using Koko's Marauder V8, purchased from his site

[H4W9]

I tried the Custom Launcher, but I just got a black screen on boot-up...

I have compiled my customized Marauder for my V8, with the pinouts in this branch... verified working

https://github.com/H4W9/ESP32Marauder/tree/Pancake_V8%2B%2B

[bmorcelli]

I get this message when I try flashing with webflasher.

Your ESP32-C5 board is not supported by this firmware.

I am using Koko's Marauder V8, purchased from his site

My bad, I messed up th eflasher config.. it is working now..

I tried the Custom Launcher, but I just got a black screen on boot-up...
I have compiled my customized Marauder for my V8, with the pinouts in this branch... verified working
https://github.com/H4W9/ESP32Marauder/tree/Pancake_V8%2B%2B

Perfect.. I will check it out

[H4W9]

Ok, successfully flashed via the web flasher. but black screen still...

Seems to boot ok though...
Here's what I see via Serial Monitor...

[bmorcelli]

Pinouts were wrong, compared to the link files you sent..

I fixed it, and its available on Beta..

If you have any other Marauder, I need to know if V6, V4 or V6.1 is working fine, because I couldn't find any difference from documentation, and theres other issue about it not working

[H4W9]

Nice! That is awesome!

I'll do some more testing later today and let you know if I discover anything.

I did notice... when I changed the UI Color I got a lot of... what seemed like random phantom touches.

I do have a DIY Marauder v6.1 that I could test the v6.1 on.

[H4W9]

I'd be stoked if you'd also add a build for the Pancake hardware that uses the ESP32-C5 and 3.5 capacitive touch display. It's also in the branch I shared a link for earlier.

I did a PR for it here... #342

[H4W9]

When I flash Marauder from Launcher via SD card, the settings don't show up in Marauder. I think it needs SPIFFS to store the settings... or am I missing something?

Ha! Had to create SPIFFS partition in Partition Manager! Got it! It's been a while since I used Launcher... I notice you've been really busy with it... Awesome features!

[H4W9]

Ok, I did try it out on my DIY Marauder v6.1. Seems to work fine to me so far...

I like the calibration on first boot-up... ensures that touch inversion is not a problem anymore!

(Marauder v6.1 runs perfectly on this DIY hardware)
I did notice a vertical line of TFT display 'noise/static' and some phantom touches though... I'm guessing it's because it is a DIY build. But how do you think I could improve it?