Bambu Studio Version
2.6.0.51
Where is the application from?
Bambu Lab Official website
OS version
Windows 10
Additional system information
No response
Printer
Bambu Lab A1
How to reproduce
- Extract the zip and upload the model in Bambu studio
- Slice it with default settings or print profiles
- Change the xy compensation values other than 0 and slice again
- This generates a sudden small step on the inner wall
Actual results
After adding xy compensation(both contour and/or hole), this weird step occurs in that particular region which is not even present in the model. This happened with both .step as well as .stl file of the part. It's like a sudden increase in that particular area width and then back to normal after the layer with those slit/holes on the wall.
Expected results
As you can see here this is the slicing without xy compensations. These don't produce any of those errors
Project file & Debug log uploads
xy_comp_error.zip
Checklist of files to include
Bambu Studio Version
2.6.0.51
Where is the application from?
Bambu Lab Official website
OS version
Windows 10
Additional system information
No response
Printer
Bambu Lab A1
How to reproduce
Actual results
After adding xy compensation(both contour and/or hole), this weird step occurs in that particular region which is not even present in the model. This happened with both .step as well as .stl file of the part. It's like a sudden increase in that particular area width and then back to normal after the layer with those slit/holes on the wall.
Expected results
As you can see here this is the slicing without xy compensations. These don't produce any of those errors
Project file & Debug log uploads
xy_comp_error.zip
Checklist of files to include