TestGates.lib

<?xml version="1.0"?>
<!DOCTYPE libraries SYSTEM "library.dtd">
<!-- #***************************************************************************** -->
<!-- #   Project: CEDAR Logic Simulator -->
<!-- #   Copyright 2006 Cedarville University, Benjamin Sprague, -->
<!-- #                     Matt Lewellyn, and David Knierim -->
<!-- #   All rights reserved. -->
<!-- #   For license information see license.txt included with distribution.    -->
<!-- # -->
<!-- #   TestGates.lib: Contains all XML definitions for gates -->
<!-- #***************************************************************************** -->
<!-- # -->
<libraries>
<library>
  <name>1 - Basic Gates</name>
  <gate>
    <name>AA_AND2</name>
    <caption>2-input AND</caption>
    <input> <name>IN_0</name> <point>-3.00,1</point> </input>
    <input> <name>IN_1</name> <point>-3.00,-1</point> </input>
    <output> <name>OUT</name> <point>3.00,0</point> </output>
    <shape>
      <line>-2,1,-3.00,1</line>
      <line>-2,-1,-3.00,-1</line>
      <line>-2,2,-2,-2</line>
      <line>-2,2,0,2</line>
      <line>-2,-2,0,-2</line>
      <line>0,2,0.31,1.98</line>
      <line>0.31,1.98,0.62,1.9</line>
      <line>0.62,1.9,0.91,1.78</line>
      <line>0.91,1.78,1.18,1.62</line>
      <line>1.18,1.62,1.41,1.41</line>
      <line>1.41,1.41,1.62,1.18</line>
      <line>1.62,1.18,1.78,0.91</line>
      <line>1.78,0.91,1.9,0.62</line>
      <line>1.9,0.62,1.98,0.31</line>
      <line>1.98,0.31,2,0</line>
      <line>2,0,1.98,-0.31</line>
      <line>1.98,-0.31,1.9,-0.62</line>
      <line>1.9,-0.62,1.78,-0.91</line>
      <line>1.78,-0.91,1.62,-1.18</line>
      <line>1.62,-1.18,1.41,-1.41</line>
      <line>1.41,-1.41,1.18,-1.62</line>
      <line>1.18,-1.62,0.91,-1.78</line>
      <line>0.91,-1.78,0.62,-1.9</line>
      <line>0.62,-1.9,0.31,-1.98</line>
      <line>0.31,-1.98,0,-2</line>
      <line>2,0,3.00,0</line>
      <line>2.2,0,3.00,0</line>
    </shape>
    <logic_type>AND</logic_type>
    <logic_param>INPUT_BITS 2</logic_param>
  </gate>
  <gate> <name>AA_AND3</name>
    <caption>3-input AND</caption>
		<input> <name>IN_0</name>
		          <point>-3.00,2</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,0</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-2</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
		</output>
		<shape>
			<line>-3.00,2,-2,2</line>
			<line>-3.00,0,-2,0</line>
			<line>-3.00,-2,-2,-2</line>
			<line>-2,3,-2,-3</line>
			<line>-2,3,0,3</line>
			<line>-2,-3,0,-3</line>
			<line>2,1,1.98,1.31</line>
			<line>1.98,1.31,1.9,1.62</line>
			<line>1.9,1.62,1.78,1.91</line>
			<line>1.78,1.91,1.62,2.18</line>
			<line>1.62,2.18,1.41,2.41</line>
			<line>1.41,2.41,1.18,2.62</line>
			<line>1.18,2.62,0.91,2.78</line>
			<line>0.91,2.78,0.62,2.9</line>
			<line>0.62,2.9,0.31,2.98</line>
			<line>0.31,2.98,0,3</line>
			<line>2,1,2,-1</line>
			<line>0,-3,0.31,-2.98</line>
			<line>0.31,-2.98,0.62,-2.9</line>
			<line>0.62,-2.9,0.91,-2.78</line>
			<line>0.91,-2.78,1.18,-2.62</line>
			<line>1.18,-2.62,1.41,-2.41</line>
			<line>1.41,-2.41,1.62,-2.18</line>
			<line>1.62,-2.18,1.78,-1.91</line>
			<line>1.78,-1.91,1.9,-1.62</line>
			<line>1.9,-1.62,1.98,-1.31</line>
			<line>1.98,-1.31,2,-1</line>
			<line>2,0,3.00,0</line>
		</shape>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
	</gate>
	<gate> <name>AA_AND4</name>
		<caption>3-input AND</caption>
		<input> <name>IN_0</name>
		          <point>-3.00,3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3.00,-3</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
		</output>
		<shape>
			<line>-3.00,3,-2,3</line>
			<line>-3.00,1,-2,1</line>
			<line>-3.00,-1,-2,-1</line>
			<line>-3.00,-3,-2,-3</line>
			<line>-2,4,-2,-4</line>
			<line>-2,4,0,4</line>
			<line>-2,-4,0,-4</line>
			<line>2,2,1.98,2.31</line>
			<line>1.98,2.31,1.9,2.62</line>
			<line>1.9,2.62,1.78,2.91</line>
			<line>1.78,2.91,1.62,3.18</line>
			<line>1.62,3.18,1.41,3.41</line>
			<line>1.41,3.41,1.18,3.62</line>
			<line>1.18,3.62,0.91,3.78</line>
			<line>0.91,3.78,0.62,3.9</line>
			<line>0.62,3.9,0.31,3.98</line>
			<line>0.31,3.98,0,4</line>
			<line>2,2,2,-2</line>
			<line>0,-4,0.31,-3.98</line>
			<line>0.31,-3.98,0.62,-3.9</line>
			<line>0.62,-3.9,0.91,-3.78</line>
			<line>0.91,-3.78,1.18,-3.62</line>
			<line>1.18,-3.62,1.41,-3.41</line>
			<line>1.41,-3.41,1.62,-3.18</line>
			<line>1.62,-3.18,1.78,-2.91</line>
			<line>1.78,-2.91,1.9,-2.62</line>
			<line>1.9,-2.62,1.98,-2.31</line>
			<line>1.98,-2.31,2,-2</line>
			<line>2,0,3.00,0</line>
		</shape>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
	</gate>
	<gate> <name>AE_OR2</name>
		<caption>2-input OR</caption>
		<input> <name>IN_0</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,-1</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
		</output>
		<shape>
			<line>-3.00,1,-1.62,1</line>
			<line>-3.00,-1,-1.62,-1</line>
			<line>-2,-2,-1.7,-1.31</line>
			<line>-1.7,-1.31,-1.62,-1</line>
			<line>-1.62,-1,-1.54,-0.66</line>
			<line>-1.54,-0.66,-1.49,0</line>
			<line>-1.49,0,-1.54,0.66</line>
			<line>-1.54,0.66,-1.62,1</line>
			<line>-1.62,1,-1.7,1.31</line>
			<line>-1.7,1.31,-2,2</line>
			<line>-2,2,-0.51,2</line>
			<line>-2,-2,-0.51,-2</line>
			<line>2,0,1.93,0.22</line>
			<line>1.93,0.22,1.78,0.6</line>
			<line>1.78,0.6,1.57,0.94</line>
			<line>1.57,0.94,1.31,1.25</line>
			<line>1.31,1.25,1,1.51</line>
			<line>1,1.51,0.66,1.72</line>
			<line>0.66,1.72,0.28,1.87</line>
			<line>0.28,1.87,-0.11,1.97</line>
			<line>-0.11,1.97,-0.51,2</line>
			<line>-0.51,-2,-0.11,-1.97</line>
			<line>-0.11,-1.97,0.28,-1.87</line>
			<line>0.28,-1.87,0.66,-1.72</line>
			<line>0.66,-1.72,1,-1.51</line>
			<line>1,-1.51,1.31,-1.25</line>
			<line>1.31,-1.25,1.57,-0.94</line>
			<line>1.57,-0.94,1.78,-0.6</line>
			<line>1.78,-0.6,1.93,-0.22</line>
			<line>1.93,-0.22,2,0</line>
			<line>2,0,3.00,0</line>
		</shape>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
	</gate>
	<gate> <name>AE_OR3</name>
		<caption>3-input OR</caption>
		<input> <name>IN_0</name>
		          <point>-3.00,2</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,0</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-2</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
		</output>
		<shape>
			<line>-3.00,2,-1.52,2</line>
			<line>-3.00,0,-1.17,0</line>
			<line>-3.00,-2,-1.52,-2</line>
			<line>-2,-3,-1.8,-2.64</line>
			<line>-1.8,-2.64,-1.52,-2</line>
			<line>-1.52,-2,-1.45,-1.8</line>
			<line>-1.45,-1.8,-1.24,-0.91</line>
			<line>-1.24,-0.91,-1.17,0</line>
			<line>-1.17,0,-1.24,0.91</line>
			<line>-1.24,0.91,-1.45,1.8</line>
			<line>-1.45,1.8,-1.52,2</line>
			<line>-1.52,2,-1.8,2.64</line>
			<line>-1.8,2.64,-2,3</line>
			<line>-2,3,-0.75,3</line>
			<line>-2,-3,-0.75,-3</line>
			<line>1.74,0.98,1.67,1.24</line>
			<line>1.67,1.24,1.51,1.61</line>
			<line>1.51,1.61,1.3,1.95</line>
			<line>1.3,1.95,1.05,2.26</line>
			<line>1.05,2.26,0.74,2.51</line>
			<line>0.74,2.51,0.4,2.72</line>
			<line>0.4,2.72,0.03,2.88</line>
			<line>0.03,2.88,-0.35,2.97</line>
			<line>-0.35,2.97,-0.75,3</line>
			<line>1.74,0.98,2,0</line>
			<line>2,0,1.74,-0.98</line>
			<line>-0.75,-3,-0.35,-2.97</line>
			<line>-0.35,-2.97,0.03,-2.88</line>
			<line>0.03,-2.88,0.4,-2.72</line>
			<line>0.4,-2.72,0.74,-2.51</line>
			<line>0.74,-2.51,1.05,-2.26</line>
			<line>1.05,-2.26,1.3,-1.95</line>
			<line>1.3,-1.95,1.51,-1.61</line>
			<line>1.51,-1.61,1.67,-1.24</line>
			<line>1.67,-1.24,1.74,-0.98</line>
			<line>2,0,3.00,0</line>
		</shape>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
	</gate>
	<gate> <name>AE_OR4</name>
		<caption>4-input OR</caption>
		<input> <name>IN_0</name>
		          <point>-3.00,3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3.00,-3</point> 
		</input>
		<output> <name>OUT</name>
		          <point>4,0</point> 
		</output>
		<shape>
			<line>-3.00,3,-1.63,3</line>
			<line>-3.00,1,-1.2,1</line>
			<line>-3.00,-1,-1.2,-1</line>
			<line>-3.00,-3,-1.62,-3</line>
			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>
			<line>-2,4,-0.77,4</line>
			<line>-2,-4,-0.77,-4</line>
			<line>2.32,1.36,2.22,1.83</line>
			<line>2.22,1.83,2.03,2.29</line>
			<line>2.03,2.29,1.77,2.71</line>
			<line>1.77,2.71,1.45,3.08</line>
			<line>1.45,3.08,1.08,3.4</line>
			<line>1.08,3.4,0.66,3.66</line>
			<line>0.66,3.66,0.2,3.85</line>
			<line>0.2,3.85,-0.28,3.96</line>
			<line>-0.28,3.96,-0.77,4</line>
			<line>2.32,1.36,2.55,0</line>
			<line>2.55,0,2.32,-1.36</line>
			<line>-0.77,-4,-0.28,-3.96</line>
			<line>-0.28,-3.96,0.2,-3.85</line>
			<line>0.2,-3.85,0.66,-3.66</line>
			<line>0.66,-3.66,1.08,-3.4</line>
			<line>1.08,-3.4,1.45,-3.08</line>
			<line>1.45,-3.08,1.77,-2.71</line>
			<line>1.77,-2.71,2.03,-2.29</line>
			<line>2.03,-2.29,2.22,-1.83</line>
			<line>2.22,-1.83,2.32,-1.36</line>
			<line>2.55,0,4,0</line>
		</shape>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
	</gate>
	<gate> <name>AI_XOR2</name>
		<caption>2-input XOR</caption>
		<logic_type>XOR</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,1</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,-1</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3,0</point> 
		</output>
		<shape>
			<line>-3,1,-2.12,1</line>
			<line>-3,-1,-2.12,-1</line>

<!-- # Back of OR gate: -->
			<line>-2,-2,-1.7,-1.31</line>
			<line>-1.7,-1.31,-1.62,-1</line>
			<line>-1.62,-1,-1.54,-0.66</line>
			<line>-1.54,-0.66,-1.49,0</line>
			<line>-1.49,0,-1.54,0.66</line>
			<line>-1.54,0.66,-1.62,1</line>
			<line>-1.62,1,-1.7,1.31</line>
			<line>-1.7,1.31,-2,2</line>

<!-- # Back of XOR gate: -->
			<offset> <point>-0.5,0</point>
			<line>-2,-2,-1.7,-1.31</line>
			<line>-1.7,-1.31,-1.62,-1</line>
			<line>-1.62,-1,-1.54,-0.66</line>
			<line>-1.54,-0.66,-1.49,0</line>
			<line>-1.49,0,-1.54,0.66</line>
			<line>-1.54,0.66,-1.62,1</line>
			<line>-1.62,1,-1.7,1.31</line>
			<line>-1.7,1.31,-2,2</line>
			</offset>

			<line>-2,2,-0.51,2</line>
			<line>-2,-2,-0.51,-2</line>
			<line>2,0,1.93,0.22</line>
			<line>1.93,0.22,1.78,0.6</line>
			<line>1.78,0.6,1.57,0.94</line>
			<line>1.57,0.94,1.31,1.25</line>
			<line>1.31,1.25,1,1.51</line>
			<line>1,1.51,0.66,1.72</line>
			<line>0.66,1.72,0.28,1.87</line>
			<line>0.28,1.87,-0.11,1.97</line>
			<line>-0.11,1.97,-0.51,2</line>
			<line>-0.51,-2,-0.11,-1.97</line>
			<line>-0.11,-1.97,0.28,-1.87</line>
			<line>0.28,-1.87,0.66,-1.72</line>
			<line>0.66,-1.72,1,-1.51</line>
			<line>1,-1.51,1.31,-1.25</line>
			<line>1.31,-1.25,1.57,-0.94</line>
			<line>1.57,-0.94,1.78,-0.6</line>
			<line>1.78,-0.6,1.93,-0.22</line>
			<line>1.93,-0.22,2,0</line>
			<line>2,0,3,0</line>
		</shape>
	</gate>
	<gate> <name>AI_XOR3</name>
		<caption>3-input XOR</caption>
		<logic_type>XOR</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,2</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,0</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,-2</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3,0</point> 
		</output>
		<shape>
			<line>-3,2,-2.04,2</line>
			<line>-3,0,-1.68,0</line>
			<line>-3,-2,-2.04,-2</line>

			<offset> <point>-0.5,0</point>
			<line>-2,-3,-1.8,-2.64</line>
			<line>-1.8,-2.64,-1.52,-2</line>
			<line>-1.52,-2,-1.45,-1.8</line>
			<line>-1.45,-1.8,-1.24,-0.91</line>
			<line>-1.24,-0.91,-1.17,0</line>
			<line>-1.17,0,-1.24,0.91</line>
			<line>-1.24,0.91,-1.45,1.8</line>
			<line>-1.45,1.8,-1.52,2</line>
			<line>-1.52,2,-1.8,2.64</line>
			<line>-1.8,2.64,-2,3</line>
			</offset>

			<line>-2,-3,-1.8,-2.64</line>
			<line>-1.8,-2.64,-1.52,-2</line>
			<line>-1.52,-2,-1.45,-1.8</line>
			<line>-1.45,-1.8,-1.24,-0.91</line>
			<line>-1.24,-0.91,-1.17,0</line>
			<line>-1.17,0,-1.24,0.91</line>
			<line>-1.24,0.91,-1.45,1.8</line>
			<line>-1.45,1.8,-1.52,2</line>
			<line>-1.52,2,-1.8,2.64</line>
			<line>-1.8,2.64,-2,3</line>

			<line>-2,3,-0.75,3</line>
			<line>-2,-3,-0.75,-3</line>

			<line>1.74,0.98,1.67,1.24</line>
			<line>1.67,1.24,1.51,1.61</line>
			<line>1.51,1.61,1.3,1.95</line>
			<line>1.3,1.95,1.05,2.26</line>
			<line>1.05,2.26,0.74,2.51</line>
			<line>0.74,2.51,0.4,2.72</line>
			<line>0.4,2.72,0.03,2.88</line>
			<line>0.03,2.88,-0.35,2.97</line>
			<line>-0.35,2.97,-0.75,3</line>
			<line>1.74,0.98,2,0</line>
			<line>2,0,1.74,-0.98</line>
			<line>-0.75,-3,-0.35,-2.97</line>
			<line>-0.35,-2.97,0.03,-2.88</line>
			<line>0.03,-2.88,0.4,-2.72</line>
			<line>0.4,-2.72,0.74,-2.51</line>
			<line>0.74,-2.51,1.05,-2.26</line>
			<line>1.05,-2.26,1.3,-1.95</line>
			<line>1.3,-1.95,1.51,-1.61</line>
			<line>1.51,-1.61,1.67,-1.24</line>
			<line>1.67,-1.24,1.74,-0.98</line>
			<line>2,0,3,0</line>
		</shape>
	</gate>
	<gate> <name>AI_XOR4</name>
		<caption>4-input XOR</caption>
		<logic_type>XOR</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,-3</point> 
		</input>
		<output> <name>OUT</name>
		          <point>4,0</point> 
		</output>
		<shape>
			<line>-3,3,-2.13,3</line>
			<line>-3,1,-1.7,1</line>
			<line>-3,-1,-1.7,-1</line>
			<line>-3,-3,-2.13,-3</line>


			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>

			<offset><point>-0.5,0</point>
			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>
			</offset>

			<line>-2,4,-0.77,4</line>
			<line>-2,-4,-0.77,-4</line>
			<line>2.32,1.36,2.22,1.83</line>
			<line>2.22,1.83,2.03,2.29</line>
			<line>2.03,2.29,1.77,2.71</line>
			<line>1.77,2.71,1.45,3.08</line>
			<line>1.45,3.08,1.08,3.4</line>
			<line>1.08,3.4,0.66,3.66</line>
			<line>0.66,3.66,0.2,3.85</line>
			<line>0.2,3.85,-0.28,3.96</line>
			<line>-0.28,3.96,-0.77,4</line>
			<line>2.33,1.36,2.55,0</line>
			<line>2.55,0,2.32,-1.36</line>
			<line>-0.77,-4,-0.28,-3.96</line>
			<line>-0.28,-3.96,0.2,-3.85</line>
			<line>0.2,-3.85,0.66,-3.66</line>
			<line>0.66,-3.66,1.08,-3.4</line>
			<line>1.08,-3.4,1.45,-3.08</line>
			<line>1.45,-3.08,1.77,-2.71</line>
			<line>1.77,-2.71,2.03,-2.29</line>
			<line>2.03,-2.29,2.22,-1.83</line>
			<line>2.22,-1.83,2.32,-1.36</line>
			<line>2.55,0,4,0</line>
			<line>2.55,0,4,0</line>
		</shape>
	</gate>
	<gate> <name>AO_XNOR2</name>
		<caption>2-input XNOR</caption>
		<logic_type>XOR</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,1</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,-1</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3,0</point> 
			  <inverted>true</inverted>
		</output>
		<shape>
			<line>-3,1,-2.12,1</line>
			<line>-3,-1,-2.12,-1</line>

<!-- # Back of OR gate: -->
			<line>-2,-2,-1.7,-1.31</line>
			<line>-1.7,-1.31,-1.62,-1</line>
			<line>-1.62,-1,-1.54,-0.66</line>
			<line>-1.54,-0.66,-1.49,0</line>
			<line>-1.49,0,-1.54,0.66</line>
			<line>-1.54,0.66,-1.62,1</line>
			<line>-1.62,1,-1.7,1.31</line>
			<line>-1.7,1.31,-2,2</line>

<!-- # Back of XOR gate: -->
			<offset> <point>-0.5,0</point>
			<line>-2,-2,-1.7,-1.31</line>
			<line>-1.7,-1.31,-1.62,-1</line>
			<line>-1.62,-1,-1.54,-0.66</line>
			<line>-1.54,-0.66,-1.49,0</line>
			<line>-1.49,0,-1.54,0.66</line>
			<line>-1.54,0.66,-1.62,1</line>
			<line>-1.62,1,-1.7,1.31</line>
			<line>-1.7,1.31,-2,2</line>
			</offset>

			<line>-2,2,-0.51,2</line>
			<line>-2,-2,-0.51,-2</line>
			<line>2,0,1.93,0.22</line>
			<line>1.93,0.22,1.78,0.6</line>
			<line>1.78,0.6,1.57,0.94</line>
			<line>1.57,0.94,1.31,1.25</line>
			<line>1.31,1.25,1,1.51</line>
			<line>1,1.51,0.66,1.72</line>
			<line>0.66,1.72,0.28,1.87</line>
			<line>0.28,1.87,-0.11,1.97</line>
			<line>-0.11,1.97,-0.51,2</line>
			<line>-0.51,-2,-0.11,-1.97</line>
			<line>-0.11,-1.97,0.28,-1.87</line>
			<line>0.28,-1.87,0.66,-1.72</line>
			<line>0.66,-1.72,1,-1.51</line>
			<line>1,-1.51,1.31,-1.25</line>
			<line>1.31,-1.25,1.57,-0.94</line>
			<line>1.57,-0.94,1.78,-0.6</line>
			<line>1.78,-0.6,1.93,-0.22</line>
			<line>1.93,-0.22,2,0</line>

			<circle>2.35,0,0.35,24</circle>

			<line>2.7,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>AO_XNOR3</name>
		<caption>3-input XNOR</caption>
		<logic_type>XOR</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,2</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,0</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,-2</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3,0</point> 
			  <inverted>true</inverted>
		</output>
		<shape>
			<line>-3,2,-2.04,2</line>
			<line>-3,0,-1.68,0</line>
			<line>-3,-2,-2.04,-2</line>

			<offset> <point>-0.5,0</point>
			<line>-2,-3,-1.8,-2.64</line>
			<line>-1.8,-2.64,-1.52,-2</line>
			<line>-1.52,-2,-1.45,-1.8</line>
			<line>-1.45,-1.8,-1.24,-0.91</line>
			<line>-1.24,-0.91,-1.17,0</line>
			<line>-1.17,0,-1.24,0.91</line>
			<line>-1.24,0.91,-1.45,1.8</line>
			<line>-1.45,1.8,-1.52,2</line>
			<line>-1.52,2,-1.8,2.64</line>
			<line>-1.8,2.64,-2,3</line>
			</offset>

			<line>-2,-3,-1.8,-2.64</line>
			<line>-1.8,-2.64,-1.52,-2</line>
			<line>-1.52,-2,-1.45,-1.8</line>
			<line>-1.45,-1.8,-1.24,-0.91</line>
			<line>-1.24,-0.91,-1.17,0</line>
			<line>-1.17,0,-1.24,0.91</line>
			<line>-1.24,0.91,-1.45,1.8</line>
			<line>-1.45,1.8,-1.52,2</line>
			<line>-1.52,2,-1.8,2.64</line>
			<line>-1.8,2.64,-2,3</line>

			<line>-2,3,-0.75,3</line>
			<line>-2,-3,-0.75,-3</line>

			<line>1.74,0.98,1.67,1.24</line>
			<line>1.67,1.24,1.51,1.61</line>
			<line>1.51,1.61,1.3,1.95</line>
			<line>1.3,1.95,1.05,2.26</line>
			<line>1.05,2.26,0.74,2.51</line>
			<line>0.74,2.51,0.4,2.72</line>
			<line>0.4,2.72,0.03,2.88</line>
			<line>0.03,2.88,-0.35,2.97</line>
			<line>-0.35,2.97,-0.75,3</line>
			<line>1.74,0.98,2,0</line>
			<line>2,0,1.74,-0.98</line>
			<line>-0.75,-3,-0.35,-2.97</line>
			<line>-0.35,-2.97,0.03,-2.88</line>
			<line>0.03,-2.88,0.4,-2.72</line>
			<line>0.4,-2.72,0.74,-2.51</line>
			<line>0.74,-2.51,1.05,-2.26</line>
			<line>1.05,-2.26,1.3,-1.95</line>
			<line>1.3,-1.95,1.51,-1.61</line>
			<line>1.51,-1.61,1.67,-1.24</line>
			<line>1.67,-1.24,1.74,-0.98</line>

			<circle>2.35,0,0.35,24</circle>

			<line>2.7,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>AO_XNOR4</name>
		<caption>4-input XNOR</caption>
		<logic_type>XOR</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,-3</point> 
		</input>
		<output> <name>OUT</name>
		          <point>4,0</point> 
			  <inverted>true</inverted>
		</output>
		<shape>
			<line>-3,3,-2.13,3</line>
			<line>-3,1,-1.7,1</line>
			<line>-3,-1,-1.7,-1</line>
			<line>-3,-3,-2.13,-3</line>


			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>

			<offset><point>-0.5,0</point>
			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>
			</offset>

			<line>-2,4,-0.77,4</line>
			<line>-2,-4,-0.77,-4</line>
			<line>2.32,1.36,2.22,1.83</line>
			<line>2.22,1.83,2.03,2.29</line>
			<line>2.03,2.29,1.77,2.71</line>
			<line>1.77,2.71,1.45,3.08</line>
			<line>1.45,3.08,1.08,3.4</line>
			<line>1.08,3.4,0.66,3.66</line>
			<line>0.66,3.66,0.2,3.85</line>
			<line>0.2,3.85,-0.28,3.96</line>
			<line>-0.28,3.96,-0.77,4</line>
			<line>2.33,1.36,2.55,0</line>
			<line>2.55,0,2.32,-1.36</line>
			<line>-0.77,-4,-0.28,-3.96</line>
			<line>-0.28,-3.96,0.2,-3.85</line>
			<line>0.2,-3.85,0.66,-3.66</line>
			<line>0.66,-3.66,1.08,-3.4</line>
			<line>1.08,-3.4,1.45,-3.08</line>
			<line>1.45,-3.08,1.77,-2.71</line>
			<line>1.77,-2.71,2.03,-2.29</line>
			<line>2.03,-2.29,2.22,-1.83</line>
			<line>2.22,-1.83,2.32,-1.36</line>

			<circle>2.9,0,0.35,24</circle>

			<line>3.25,0,4.00,0</line>
		</shape>
	</gate>
	<gate> <name>BA_NAND2</name>
		<caption>2-input NAND</caption>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,-1</point> 
		</input>
		<output> <name>OUT</name>
			<point>3.00,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-2,1,-3.00,1</line>
			<line>-2,-1,-3.00,-1</line>
			<line>-2,2,-2,-2</line>
			<line>-2,2,0,2</line>
			<line>-2,-2,0,-2</line>
			<line>0,2,0.31,1.98</line>
			<line>0.31,1.98,0.62,1.9</line>
			<line>0.62,1.9,0.91,1.78</line>
			<line>0.91,1.78,1.18,1.62</line>
			<line>1.18,1.62,1.41,1.41</line>
			<line>1.41,1.41,1.62,1.18</line>
			<line>1.62,1.18,1.78,0.91</line>
			<line>1.78,0.91,1.9,0.62</line>
			<line>1.9,0.62,1.98,0.31</line>
			<line>1.98,0.31,2,0</line>
			<line>2,0,1.98,-0.31</line>
			<line>1.98,-0.31,1.9,-0.62</line>
			<line>1.9,-0.62,1.78,-0.91</line>
			<line>1.78,-0.91,1.62,-1.18</line>
			<line>1.62,-1.18,1.41,-1.41</line>
			<line>1.41,-1.41,1.18,-1.62</line>
			<line>1.18,-1.62,0.91,-1.78</line>
			<line>0.91,-1.78,0.62,-1.9</line>
			<line>0.62,-1.9,0.31,-1.98</line>
			<line>0.31,-1.98,0,-2</line>

			<circle>2.35,0,0.35,24</circle>

			<line>2.7,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BA_NAND3</name>
		<caption>3-input NAND</caption>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,2</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,0</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-2</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point>
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-3.00,2,-2,2</line>
			<line>-3.00,0,-2,0</line>
			<line>-3.00,-2,-2,-2</line>
			<line>-2,3,-2,-3</line>
			<line>-2,3,0,3</line>
			<line>-2,-3,0,-3</line>
			<line>2,1,1.98,1.31</line>
			<line>1.98,1.31,1.9,1.62</line>
			<line>1.9,1.62,1.78,1.91</line>
			<line>1.78,1.91,1.62,2.18</line>
			<line>1.62,2.18,1.41,2.41</line>
			<line>1.41,2.41,1.18,2.62</line>
			<line>1.18,2.62,0.91,2.78</line>
			<line>0.91,2.78,0.62,2.9</line>
			<line>0.62,2.9,0.31,2.98</line>
			<line>0.31,2.98,0,3</line>
			<line>2,1,2,-1</line>
			<line>0,-3,0.31,-2.98</line>
			<line>0.31,-2.98,0.62,-2.9</line>
			<line>0.62,-2.9,0.91,-2.78</line>
			<line>0.91,-2.78,1.18,-2.62</line>
			<line>1.18,-2.62,1.41,-2.41</line>
			<line>1.41,-2.41,1.62,-2.18</line>
			<line>1.62,-2.18,1.78,-1.91</line>
			<line>1.78,-1.91,1.9,-1.62</line>
			<line>1.9,-1.62,1.98,-1.31</line>
			<line>1.98,-1.31,2,-1</line>

			<circle>2.35,0,0.35,24</circle>

			<line>2.7,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BA_NAND4</name>
		<caption>4-input NAND</caption>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3.00,-3</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point>
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-3.00,3,-2,3</line>
			<line>-3.00,1,-2,1</line>
			<line>-3.00,-1,-2,-1</line>
			<line>-3.00,-3,-2,-3</line>
			<line>-2,4,-2,-4</line>
			<line>-2,4,0,4</line>
			<line>-2,-4,0,-4</line>
			<line>2,2,1.98,2.31</line>
			<line>1.98,2.31,1.9,2.62</line>
			<line>1.9,2.62,1.78,2.91</line>
			<line>1.78,2.91,1.62,3.18</line>
			<line>1.62,3.18,1.41,3.41</line>
			<line>1.41,3.41,1.18,3.62</line>
			<line>1.18,3.62,0.91,3.78</line>
			<line>0.91,3.78,0.62,3.9</line>
			<line>0.62,3.9,0.31,3.98</line>
			<line>0.31,3.98,0,4</line>
			<line>2,2,2,-2</line>
			<line>0,-4,0.31,-3.98</line>
			<line>0.31,-3.98,0.62,-3.9</line>
			<line>0.62,-3.9,0.91,-3.78</line>
			<line>0.91,-3.78,1.18,-3.62</line>
			<line>1.18,-3.62,1.41,-3.41</line>
			<line>1.41,-3.41,1.62,-3.18</line>
			<line>1.62,-3.18,1.78,-2.91</line>
			<line>1.78,-2.91,1.9,-2.62</line>
			<line>1.9,-2.62,1.98,-2.31</line>
			<line>1.98,-2.31,2,-2</line>

			<circle>2.35,0,0.35,24</circle>

			<line>2.7,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BE_NOR2</name>
		<caption>2-input NOR</caption>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,-1</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-3.00,1,-1.62,1</line>
			<line>-3.00,-1,-1.62,-1</line>
			<line>-2,-2,-1.7,-1.31</line>
			<line>-1.7,-1.31,-1.62,-1</line>
			<line>-1.62,-1,-1.54,-0.66</line>
			<line>-1.54,-0.66,-1.49,0</line>
			<line>-1.49,0,-1.54,0.66</line>
			<line>-1.54,0.66,-1.62,1</line>
			<line>-1.62,1,-1.7,1.31</line>
			<line>-1.7,1.31,-2,2</line>
			<line>-2,2,-0.51,2</line>
			<line>-2,-2,-0.51,-2</line>
			<line>2,0,1.93,0.22</line>
			<line>1.93,0.22,1.78,0.6</line>
			<line>1.78,0.6,1.57,0.94</line>
			<line>1.57,0.94,1.31,1.25</line>
			<line>1.31,1.25,1,1.51</line>
			<line>1,1.51,0.66,1.72</line>
			<line>0.66,1.72,0.28,1.87</line>
			<line>0.28,1.87,-0.11,1.97</line>
			<line>-0.11,1.97,-0.51,2</line>
			<line>-0.51,-2,-0.11,-1.97</line>
			<line>-0.11,-1.97,0.28,-1.87</line>
			<line>0.28,-1.87,0.66,-1.72</line>
			<line>0.66,-1.72,1,-1.51</line>
			<line>1,-1.51,1.31,-1.25</line>
			<line>1.31,-1.25,1.57,-0.94</line>
			<line>1.57,-0.94,1.78,-0.6</line>
			<line>1.78,-0.6,1.93,-0.22</line>
			<line>1.93,-0.22,2,0</line>

			<circle>2.35,0,0.35,24</circle>

			<line>2.7,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BE_NOR3</name>
		<caption>3-input NOR</caption>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,2</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,0</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-2</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-3.00,2,-1.52,2</line>
			<line>-3.00,0,-1.17,0</line>
			<line>-3.00,-2,-1.52,-2</line>
			<line>-2,-3,-1.8,-2.64</line>
			<line>-1.8,-2.64,-1.52,-2</line>
			<line>-1.52,-2,-1.45,-1.8</line>
			<line>-1.45,-1.8,-1.24,-0.91</line>
			<line>-1.24,-0.91,-1.17,0</line>
			<line>-1.17,0,-1.24,0.91</line>
			<line>-1.24,0.91,-1.45,1.8</line>
			<line>-1.45,1.8,-1.52,2</line>
			<line>-1.52,2,-1.8,2.64</line>
			<line>-1.8,2.64,-2,3</line>
			<line>-2,3,-0.75,3</line>
			<line>-2,-3,-0.75,-3</line>
			<line>1.74,0.98,1.67,1.24</line>
			<line>1.67,1.24,1.51,1.61</line>
			<line>1.51,1.61,1.3,1.95</line>
			<line>1.3,1.95,1.05,2.26</line>
			<line>1.05,2.26,0.74,2.51</line>
			<line>0.74,2.51,0.4,2.72</line>
			<line>0.4,2.72,0.03,2.88</line>
			<line>0.03,2.88,-0.35,2.97</line>
			<line>-0.35,2.97,-0.75,3</line>
			<line>1.74,0.98,2,0</line>
			<line>2,0,1.74,-0.98</line>
			<line>-0.75,-3,-0.35,-2.97</line>
			<line>-0.35,-2.97,0.03,-2.88</line>
			<line>0.03,-2.88,0.4,-2.72</line>
			<line>0.4,-2.72,0.74,-2.51</line>
			<line>0.74,-2.51,1.05,-2.26</line>
			<line>1.05,-2.26,1.3,-1.95</line>
			<line>1.3,-1.95,1.51,-1.61</line>
			<line>1.51,-1.61,1.67,-1.24</line>
			<line>1.67,-1.24,1.74,-0.98</line>

			<circle>2.35,0,0.35,24</circle>

			<line>2.7,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BE_NOR4</name>
		<caption>4-input NOR</caption>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3.00,-3</point> 
		</input>
		<output> <name>OUT</name>
		          <point>4,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-3.00,3,-1.63,3</line>
			<line>-3.00,1,-1.2,1</line>
			<line>-3.00,-1,-1.2,-1</line>
			<line>-3.00,-3,-1.62,-3</line>
			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>
			<line>-2,4,-0.77,4</line>
			<line>-2,-4,-0.77,-4</line>
			<line>2.32,1.36,2.22,1.83</line>
			<line>2.22,1.83,2.03,2.29</line>
			<line>2.03,2.29,1.77,2.71</line>
			<line>1.77,2.71,1.45,3.08</line>
			<line>1.45,3.08,1.08,3.4</line>
			<line>1.08,3.4,0.66,3.66</line>
			<line>0.66,3.66,0.2,3.85</line>
			<line>0.2,3.85,-0.28,3.96</line>
			<line>-0.28,3.96,-0.77,4</line>
			<line>2.32,1.36,2.55,0</line>
			<line>2.55,0,2.32,-1.36</line>
			<line>-0.77,-4,-0.28,-3.96</line>
			<line>-0.28,-3.96,0.2,-3.85</line>
			<line>0.2,-3.85,0.66,-3.66</line>
			<line>0.66,-3.66,1.08,-3.4</line>
			<line>1.08,-3.4,1.45,-3.08</line>
			<line>1.45,-3.08,1.77,-2.71</line>
			<line>1.77,-2.71,2.03,-2.29</line>
			<line>2.03,-2.29,2.22,-1.83</line>
			<line>2.22,-1.83,2.32,-1.36</line>

			<circle>2.9,0,0.35,24</circle>

			<line>3.25,0,4,0</line>
		</shape>
	</gate>
	<gate> <name>BI_NANDX2</name>
		<caption>2-input NANDX</caption>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,-1</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-1.63,1,-1.68,1.18</line>
			<line>-1.68,1.18,-1.81,1.3</line>
			<line>-1.81,1.3,-1.98,1.35</line>
			<line>-1.98,1.35,-2.16,1.3</line>
			<line>-2.16,1.3,-2.28,1.18</line>
			<line>-2.28,1.18,-2.33,1</line>
			<line>-2.33,1,-2.28,0.83</line>
			<line>-2.28,0.83,-2.16,0.7</line>
			<line>-2.16,0.7,-1.98,0.65</line>
			<line>-1.98,0.65,-1.81,0.7</line>
			<line>-1.81,0.7,-1.68,0.83</line>
			<line>-1.68,0.83,-1.63,1</line>
			<line>-2.33,1,-3.00,1</line>
			<line>-1.63,-1,-1.68,-0.83</line>
			<line>-1.68,-0.83,-1.81,-0.7</line>
			<line>-1.81,-0.7,-1.98,-0.65</line>
			<line>-1.98,-0.65,-2.16,-0.7</line>
			<line>-2.16,-0.7,-2.28,-0.83</line>
			<line>-2.28,-0.83,-2.33,-1</line>
			<line>-2.33,-1,-2.28,-1.18</line>
			<line>-2.28,-1.18,-2.16,-1.3</line>
			<line>-2.16,-1.3,-1.98,-1.35</line>
			<line>-1.98,-1.35,-1.81,-1.3</line>
			<line>-1.81,-1.3,-1.68,-1.18</line>
			<line>-1.68,-1.18,-1.63,-1</line>
			<line>-2.33,-1,-3.00,-1</line>
			<line>-2,-2,-1.7,-1.31</line>
			<line>-1.7,-1.31,-1.62,-1</line>
			<line>-1.62,-1,-1.54,-0.66</line>
			<line>-1.54,-0.66,-1.49,0</line>
			<line>-1.49,0,-1.54,0.66</line>
			<line>-1.54,0.66,-1.62,1</line>
			<line>-1.62,1,-1.7,1.31</line>
			<line>-1.7,1.31,-2,2</line>
			<line>-2,2,-0.51,2</line>
			<line>-2,-2,-0.51,-2</line>
			<line>2,0,1.93,0.22</line>
			<line>1.93,0.22,1.78,0.6</line>
			<line>1.78,0.6,1.57,0.94</line>
			<line>1.57,0.94,1.31,1.25</line>
			<line>1.31,1.25,1,1.51</line>
			<line>1,1.51,0.66,1.72</line>
			<line>0.66,1.72,0.28,1.87</line>
			<line>0.28,1.87,-0.11,1.97</line>
			<line>-0.11,1.97,-0.51,2</line>
			<line>-0.51,-2,-0.11,-1.97</line>
			<line>-0.11,-1.97,0.28,-1.87</line>
			<line>0.28,-1.87,0.66,-1.72</line>
			<line>0.66,-1.72,1,-1.51</line>
			<line>1,-1.51,1.31,-1.25</line>
			<line>1.31,-1.25,1.57,-0.94</line>
			<line>1.57,-0.94,1.78,-0.6</line>
			<line>1.78,-0.6,1.93,-0.22</line>
			<line>1.93,-0.22,2,0</line>
			<line>2,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BI_NANDX3</name>
		<caption>3-input NANDX</caption>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,2</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,0</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-2</point> 
		</input>
		<output> <name>OUT</name>
			<inverted>true</inverted>
		          <point>3.00,0</point> 
		</output>
		<shape>
			<line>-1.55,2,-1.6,2.18</line>
			<line>-1.6,2.18,-1.73,2.3</line>
			<line>-1.73,2.3,-1.9,2.35</line>
			<line>-1.9,2.35,-2.08,2.3</line>
			<line>-2.08,2.3,-2.2,2.18</line>
			<line>-2.2,2.18,-2.25,2</line>
			<line>-2.25,2,-2.2,1.83</line>
			<line>-2.2,1.83,-2.08,1.7</line>
			<line>-2.08,1.7,-1.9,1.65</line>
			<line>-1.9,1.65,-1.73,1.7</line>
			<line>-1.73,1.7,-1.6,1.83</line>
			<line>-1.6,1.83,-1.55,2</line>
			<line>-2.25,2,-3.00,2</line>
			<line>-1.17,0,-1.22,0.18</line>
			<line>-1.22,0.18,-1.35,0.3</line>
			<line>-1.35,0.3,-1.52,0.35</line>
			<line>-1.52,0.35,-1.7,0.3</line>
			<line>-1.7,0.3,-1.82,0.18</line>
			<line>-1.82,0.18,-1.87,0</line>
			<line>-1.87,0,-1.82,-0.18</line>
			<line>-1.82,-0.18,-1.7,-0.3</line>
			<line>-1.7,-0.3,-1.52,-0.35</line>
			<line>-1.52,-0.35,-1.35,-0.3</line>
			<line>-1.35,-0.3,-1.22,-0.18</line>
			<line>-1.22,-0.18,-1.17,0</line>
			<line>-1.87,0,-3.00,0</line>
			<line>-1.55,-2,-1.6,-1.83</line>
			<line>-1.6,-1.83,-1.73,-1.7</line>
			<line>-1.73,-1.7,-1.9,-1.65</line>
			<line>-1.9,-1.65,-2.08,-1.7</line>
			<line>-2.08,-1.7,-2.2,-1.83</line>
			<line>-2.2,-1.83,-2.25,-2</line>
			<line>-2.25,-2,-2.2,-2.18</line>
			<line>-2.2,-2.18,-2.08,-2.3</line>
			<line>-2.08,-2.3,-1.9,-2.35</line>
			<line>-1.9,-2.35,-1.73,-2.3</line>
			<line>-1.73,-2.3,-1.6,-2.18</line>
			<line>-1.6,-2.18,-1.55,-2</line>
			<line>-2.25,-2,-3.00,-2</line>
			<line>-2,-3,-1.8,-2.64</line>
			<line>-1.8,-2.64,-1.52,-2</line>
			<line>-1.52,-2,-1.45,-1.8</line>
			<line>-1.45,-1.8,-1.24,-0.91</line>
			<line>-1.24,-0.91,-1.17,0</line>
			<line>-1.17,0,-1.24,0.91</line>
			<line>-1.24,0.91,-1.45,1.8</line>
			<line>-1.45,1.8,-1.52,2</line>
			<line>-1.52,2,-1.8,2.64</line>
			<line>-1.8,2.64,-2,3</line>
			<line>-2,3,-0.75,3</line>
			<line>-2,-3,-0.75,-3</line>
			<line>1.74,0.98,1.67,1.24</line>
			<line>1.67,1.24,1.51,1.61</line>
			<line>1.51,1.61,1.3,1.95</line>
			<line>1.3,1.95,1.05,2.26</line>
			<line>1.05,2.26,0.74,2.51</line>
			<line>0.74,2.51,0.4,2.72</line>
			<line>0.4,2.72,0.03,2.88</line>
			<line>0.03,2.88,-0.35,2.97</line>
			<line>-0.35,2.97,-0.75,3</line>
			<line>1.74,0.98,2,0</line>
			<line>2,0,1.74,-0.98</line>
			<line>-0.75,-3,-0.35,-2.97</line>
			<line>-0.35,-2.97,0.03,-2.88</line>
			<line>0.03,-2.88,0.4,-2.72</line>
			<line>0.4,-2.72,0.74,-2.51</line>
			<line>0.74,-2.51,1.05,-2.26</line>
			<line>1.05,-2.26,1.3,-1.95</line>
			<line>1.3,-1.95,1.51,-1.61</line>
			<line>1.51,-1.61,1.67,-1.24</line>
			<line>1.67,-1.24,1.74,-0.98</line>
			<line>2,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BI_NANDX4</name>
		<caption>4-input NANDX</caption>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3.00,-3</point> 
		</input>
		<output> <name>OUT</name>
			<inverted>true</inverted>
		          <point>4,0</point> 
		</output>
		<shape>
			<line>-1.65,3,-1.7,3.18</line>
			<line>-1.7,3.18,-1.83,3.3</line>
			<line>-1.83,3.3,-2,3.35</line>
			<line>-2,3.35,-2.18,3.3</line>
			<line>-2.18,3.3,-2.3,3.18</line>
			<line>-2.3,3.18,-2.35,3</line>
			<line>-2.35,3,-2.3,2.83</line>
			<line>-2.3,2.83,-2.18,2.7</line>
			<line>-2.18,2.7,-2,2.65</line>
			<line>-2,2.65,-1.83,2.7</line>
			<line>-1.83,2.7,-1.7,2.83</line>
			<line>-1.7,2.83,-1.65,3</line>
			<line>-2.35,3,-3.00,3</line>
			<line>-1.2,1,-1.25,1.18</line>
			<line>-1.25,1.18,-1.38,1.3</line>
			<line>-1.38,1.3,-1.55,1.35</line>
			<line>-1.55,1.35,-1.73,1.3</line>
			<line>-1.73,1.3,-1.85,1.18</line>
			<line>-1.85,1.18,-1.9,1</line>
			<line>-1.9,1,-1.85,0.83</line>
			<line>-1.85,0.83,-1.73,0.7</line>
			<line>-1.73,0.7,-1.55,0.65</line>
			<line>-1.55,0.65,-1.38,0.7</line>
			<line>-1.38,0.7,-1.25,0.83</line>
			<line>-1.25,0.83,-1.2,1</line>
			<line>-1.9,1,-3.00,1</line>
			<line>-1.2,-1,-1.25,-0.83</line>
			<line>-1.25,-0.83,-1.38,-0.7</line>
			<line>-1.38,-0.7,-1.55,-0.65</line>
			<line>-1.55,-0.65,-1.73,-0.7</line>
			<line>-1.73,-0.7,-1.85,-0.83</line>
			<line>-1.85,-0.83,-1.9,-1</line>
			<line>-1.9,-1,-1.85,-1.18</line>
			<line>-1.85,-1.18,-1.73,-1.3</line>
			<line>-1.73,-1.3,-1.55,-1.35</line>
			<line>-1.55,-1.35,-1.38,-1.3</line>
			<line>-1.38,-1.3,-1.25,-1.18</line>
			<line>-1.25,-1.18,-1.2,-1</line>
			<line>-1.9,-1,-3.00,-1</line>
			<line>-1.65,-3,-1.7,-2.83</line>
			<line>-1.7,-2.83,-1.83,-2.7</line>
			<line>-1.83,-2.7,-2,-2.65</line>
			<line>-2,-2.65,-2.18,-2.7</line>
			<line>-2.18,-2.7,-2.3,-2.83</line>
			<line>-2.3,-2.83,-2.35,-3</line>
			<line>-2.35,-3,-2.3,-3.18</line>
			<line>-2.3,-3.18,-2.18,-3.3</line>
			<line>-2.18,-3.3,-2,-3.35</line>
			<line>-2,-3.35,-1.83,-3.3</line>
			<line>-1.83,-3.3,-1.7,-3.18</line>
			<line>-1.7,-3.18,-1.65,-3</line>
			<line>-2.35,-3,-3.00,-3</line>
			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>
			<line>-2,4,-0.77,4</line>
			<line>-2,-4,-0.77,-4</line>
			<line>2.32,1.36,2.22,1.83</line>
			<line>2.22,1.83,2.03,2.29</line>
			<line>2.03,2.29,1.77,2.71</line>
			<line>1.77,2.71,1.45,3.08</line>
			<line>1.45,3.08,1.08,3.4</line>
			<line>1.08,3.4,0.66,3.66</line>
			<line>0.66,3.66,0.2,3.85</line>
			<line>0.2,3.85,-0.28,3.96</line>
			<line>-0.28,3.96,-0.77,4</line>
			<line>2.32,1.36,2.55,0</line>
			<line>2.55,0,2.32,-1.36</line>
			<line>-0.77,-4,-0.28,-3.96</line>
			<line>-0.28,-3.96,0.2,-3.85</line>
			<line>0.2,-3.85,0.66,-3.66</line>
			<line>0.66,-3.66,1.08,-3.4</line>
			<line>1.08,-3.4,1.45,-3.08</line>
			<line>1.45,-3.08,1.77,-2.71</line>
			<line>1.77,-2.71,2.03,-2.29</line>
			<line>2.03,-2.29,2.22,-1.83</line>
			<line>2.22,-1.83,2.32,-1.36</line>
			<line>2.55,0,4,0</line>
		</shape>
	</gate>
	<gate> <name>BM_NORX2</name>
		<caption>2-input NORX</caption>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,-1</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point>
			<inverted>true</inverted>
		</output>
		<shape>
<!-- # Top rear input: -->
			<offset> <point>-3.00,1</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>

<!-- # Bottom rear input: -->
			<offset> <point>-3.00,-1</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>

<!-- # Sides: -->
			<line>-2,2,-2,-2</line>
			<line>-2,2,0,2</line>
			<line>-2,-2,0,-2</line>

<!-- # Front arc: -->
			<line>0,2,0.31,1.98</line>
			<line>0.31,1.98,0.62,1.9</line>
			<line>0.62,1.9,0.91,1.78</line>
			<line>0.91,1.78,1.18,1.62</line>
			<line>1.18,1.62,1.41,1.41</line>
			<line>1.41,1.41,1.62,1.18</line>
			<line>1.62,1.18,1.78,0.91</line>
			<line>1.78,0.91,1.9,0.62</line>
			<line>1.9,0.62,1.98,0.31</line>
			<line>1.98,0.31,2,0</line>
			<line>2,0,1.98,-0.31</line>
			<line>1.98,-0.31,1.9,-0.62</line>
			<line>1.9,-0.62,1.78,-0.91</line>
			<line>1.78,-0.91,1.62,-1.18</line>
			<line>1.62,-1.18,1.41,-1.41</line>
			<line>1.41,-1.41,1.18,-1.62</line>
			<line>1.18,-1.62,0.91,-1.78</line>
			<line>0.91,-1.78,0.62,-1.9</line>
			<line>0.62,-1.9,0.31,-1.98</line>
			<line>0.31,-1.98,0,-2</line>

<!-- # Output pin: -->
			<line>2,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BM_NORX3</name>
		<caption>3-input NORX</caption>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,2</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,0</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-2</point> 
		</input>
		<output> <name>OUT</name>
			<inverted>true</inverted>
		          <point>3.00,0</point> 
		</output>
		<shape>
			<offset> <point>-3.00,2</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>

			<offset> <point>-3.00,0</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>

			<offset> <point>-3.00,-2</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>

			<line>-2,3,-2,-3</line>
			<line>-2,3,0,3</line>
			<line>-2,-3,0,-3</line>
			<line>2,1,1.98,1.31</line>
			<line>1.98,1.31,1.9,1.62</line>
			<line>1.9,1.62,1.78,1.91</line>
			<line>1.78,1.91,1.62,2.18</line>
			<line>1.62,2.18,1.41,2.41</line>
			<line>1.41,2.41,1.18,2.62</line>
			<line>1.18,2.62,0.91,2.78</line>
			<line>0.91,2.78,0.62,2.9</line>
			<line>0.62,2.9,0.31,2.98</line>
			<line>0.31,2.98,0,3</line>
			<line>2,1,2,-1</line>
			<line>0,-3,0.31,-2.98</line>
			<line>0.31,-2.98,0.62,-2.9</line>
			<line>0.62,-2.9,0.91,-2.78</line>
			<line>0.91,-2.78,1.18,-2.62</line>
			<line>1.18,-2.62,1.41,-2.41</line>
			<line>1.41,-2.41,1.62,-2.18</line>
			<line>1.62,-2.18,1.78,-1.91</line>
			<line>1.78,-1.91,1.9,-1.62</line>
			<line>1.9,-1.62,1.98,-1.31</line>
			<line>1.98,-1.31,2,-1</line>
			<line>2,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>BM_NORX4</name>
		<caption>4-input NORX</caption>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3.00,-3</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<offset> <point>-3.00,3</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,1</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,-1</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,-3</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>

			<line>-2,4,-2,-4</line>
			<line>-2,4,0,4</line>
			<line>-2,-4,0,-4</line>
			<line>2,2,1.98,2.31</line>
			<line>1.98,2.31,1.9,2.62</line>
			<line>1.9,2.62,1.78,2.91</line>
			<line>1.78,2.91,1.62,3.18</line>
			<line>1.62,3.18,1.41,3.41</line>
			<line>1.41,3.41,1.18,3.62</line>
			<line>1.18,3.62,0.91,3.78</line>
			<line>0.91,3.78,0.62,3.9</line>
			<line>0.62,3.9,0.31,3.98</line>
			<line>0.31,3.98,0,4</line>
			<line>2,2,2,-2</line>
			<line>0,-4,0.31,-3.98</line>
			<line>0.31,-3.98,0.62,-3.9</line>
			<line>0.62,-3.9,0.91,-3.78</line>
			<line>0.91,-3.78,1.18,-3.62</line>
			<line>1.18,-3.62,1.41,-3.41</line>
			<line>1.41,-3.41,1.62,-3.18</line>
			<line>1.62,-3.18,1.78,-2.91</line>
			<line>1.78,-2.91,1.9,-2.62</line>
			<line>1.9,-2.62,1.98,-2.31</line>
			<line>1.98,-2.31,2,-2</line>
			<line>2,0,3.00,0</line>
		</shape>
	</gate>
	<gate> <name>DA_AND8</name>
		<caption>8-input AND</caption>
		<input> <name>IN_0</name>
		          <point>-3,3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,1.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,0.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-3,-0.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-3,-2.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-3,-3.5</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3,0</point> 
		</output>
		<shape>
			<line>-3,3.5,-2,3.5</line>
			<line>-3,2.5,-2,2.5</line>
			<line>-3,1.5,-2,1.5</line>
			<line>-3,0.5,-2,0.5</line>
			<line>-3,-0.5,-2,-0.5</line>
			<line>-3,-1.5,-2,-1.5</line>
			<line>-3,-2.5,-2,-2.5</line>
			<line>-3,-3.5,-2,-3.5</line>
			<line>-2,4,-2,-4</line>
			<line>-2,4,0,4</line>
			<line>-2,-4,0,-4</line>
			<line>2,2,1.98,2.31</line>
			<line>1.98,2.31,1.9,2.62</line>
			<line>1.9,2.62,1.78,2.91</line>
			<line>1.78,2.91,1.62,3.18</line>
			<line>1.62,3.18,1.41,3.41</line>
			<line>1.41,3.41,1.18,3.62</line>
			<line>1.18,3.62,0.91,3.78</line>
			<line>0.91,3.78,0.62,3.9</line>
			<line>0.62,3.9,0.31,3.98</line>
			<line>0.31,3.98,0,4</line>
			<line>2,2,2,-2</line>
			<line>0,-4,0.31,-3.98</line>
			<line>0.31,-3.98,0.62,-3.9</line>
			<line>0.62,-3.9,0.91,-3.78</line>
			<line>0.91,-3.78,1.18,-3.62</line>
			<line>1.18,-3.62,1.41,-3.41</line>
			<line>1.41,-3.41,1.62,-3.18</line>
			<line>1.62,-3.18,1.78,-2.91</line>
			<line>1.78,-2.91,1.9,-2.62</line>
			<line>1.9,-2.62,1.98,-2.31</line>
			<line>1.98,-2.31,2,-2</line>
			<line>2,0,3.0,0</line>
		</shape>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>
	</gate>
	<gate> <name>DE_OR8</name>
		<caption>8-input OR</caption>
		<input> <name>IN_0</name>
		          <point>-3,3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,1.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,0.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-3,-3.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-3,-2.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-3,-0.5</point> 
		</input>
		<output> <name>OUT</name>
		          <point>4,0</point> 
		</output>
		<shape>
			<line>-3,3.5,-1.81,3.5</line>
			<line>-3,2.5,-1.5,2.5</line>
			<line>-3,1.5,-1.27,1.5</line>
			<line>-3,0.5,-1.16,0.5</line>
			<line>-3,-3.5,-1.81,-3.5</line>
			<line>-3,-2.5,-1.5,-2.5</line>
			<line>-3,-1.5,-1.27,-1.5</line>
			<line>-3,-0.5,-1.16,-0.5</line>
			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>
			<line>-2,4,-0.77,4</line>
			<line>-2,-4,-0.77,-4</line>
			<line>2.32,1.36,2.22,1.83</line>
			<line>2.22,1.83,2.03,2.29</line>
			<line>2.03,2.29,1.77,2.71</line>
			<line>1.77,2.71,1.45,3.08</line>
			<line>1.45,3.08,1.08,3.4</line>
			<line>1.08,3.4,0.66,3.66</line>
			<line>0.66,3.66,0.2,3.85</line>
			<line>0.2,3.85,-0.28,3.96</line>
			<line>-0.28,3.96,-0.77,4</line>
			<line>2.33,1.36,2.55,0</line>
			<line>2.55,0,2.32,-1.36</line>
			<line>-0.77,-4,-0.28,-3.96</line>
			<line>-0.28,-3.96,0.2,-3.85</line>
			<line>0.2,-3.85,0.66,-3.66</line>
			<line>0.66,-3.66,1.08,-3.4</line>
			<line>1.08,-3.4,1.45,-3.08</line>
			<line>1.45,-3.08,1.77,-2.71</line>
			<line>1.77,-2.71,2.03,-2.29</line>
			<line>2.03,-2.29,2.22,-1.83</line>
			<line>2.22,-1.83,2.32,-1.36</line>
			<line>2.55,0,4,0</line>
		</shape>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>
	</gate>
	<gate> <name>DI_NAND8</name>
		<caption>8-input NAND</caption>
		<input> <name>IN_0</name>
		          <point>-3,3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,1.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,0.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-3,-0.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-3,-2.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-3,-3.5</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-3,3.5,-2,3.5</line>
			<line>-3,2.5,-2,2.5</line>
			<line>-3,1.5,-2,1.5</line>
			<line>-3,0.5,-2,0.5</line>
			<line>-3,-0.5,-2,-0.5</line>
			<line>-3,-1.5,-2,-1.5</line>
			<line>-3,-2.5,-2,-2.5</line>
			<line>-3,-3.5,-2,-3.5</line>
			<line>-2,4,-2,-4</line>
			<line>-2,4,0,4</line>
			<line>-2,-4,0,-4</line>
			<line>2,2,1.98,2.31</line>
			<line>1.98,2.31,1.9,2.62</line>
			<line>1.9,2.62,1.78,2.91</line>
			<line>1.78,2.91,1.62,3.18</line>
			<line>1.62,3.18,1.41,3.41</line>
			<line>1.41,3.41,1.18,3.62</line>
			<line>1.18,3.62,0.91,3.78</line>
			<line>0.91,3.78,0.62,3.9</line>
			<line>0.62,3.9,0.31,3.98</line>
			<line>0.31,3.98,0,4</line>
			<line>2,2,2,-2</line>
			<line>0,-4,0.31,-3.98</line>
			<line>0.31,-3.98,0.62,-3.9</line>
			<line>0.62,-3.9,0.91,-3.78</line>
			<line>0.91,-3.78,1.18,-3.62</line>
			<line>1.18,-3.62,1.41,-3.41</line>
			<line>1.41,-3.41,1.62,-3.18</line>
			<line>1.62,-3.18,1.78,-2.91</line>
			<line>1.78,-2.91,1.9,-2.62</line>
			<line>1.9,-2.62,1.98,-2.31</line>
			<line>1.98,-2.31,2,-2</line>

			<circle>2.35,0,0.35,24</circle>

			<line>2.7,0,3.00,0</line>

		</shape>
		<logic_type>AND</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>
	</gate>
	<gate> <name>DM_NOR8</name>
		<caption>8-input NOR</caption>
		<input> <name>IN_0</name>
		          <point>-3,3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,1.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,0.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-3,-3.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-3,-2.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-3,-0.5</point> 
		</input>
		<output> <name>OUT</name>
		          <point>4,0</point>
		<inverted>true</inverted>
		</output>
		<shape>
			<line>-3,3.5,-1.81,3.5</line>
			<line>-3,2.5,-1.5,2.5</line>
			<line>-3,1.5,-1.27,1.5</line>
			<line>-3,0.5,-1.16,0.5</line>
			<line>-3,-3.5,-1.81,-3.5</line>
			<line>-3,-2.5,-1.5,-2.5</line>
			<line>-3,-1.5,-1.27,-1.5</line>
			<line>-3,-0.5,-1.16,-0.5</line>
			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>
			<line>-2,4,-0.77,4</line>
			<line>-2,-4,-0.77,-4</line>
			<line>2.32,1.36,2.22,1.83</line>
			<line>2.22,1.83,2.03,2.29</line>
			<line>2.03,2.29,1.77,2.71</line>
			<line>1.77,2.71,1.45,3.08</line>
			<line>1.45,3.08,1.08,3.4</line>
			<line>1.08,3.4,0.66,3.66</line>
			<line>0.66,3.66,0.2,3.85</line>
			<line>0.2,3.85,-0.28,3.96</line>
			<line>-0.28,3.96,-0.77,4</line>
			<line>2.33,1.36,2.55,0</line>
			<line>2.55,0,2.32,-1.36</line>
			<line>-0.77,-4,-0.28,-3.96</line>
			<line>-0.28,-3.96,0.2,-3.85</line>
			<line>0.2,-3.85,0.66,-3.66</line>
			<line>0.66,-3.66,1.08,-3.4</line>
			<line>1.08,-3.4,1.45,-3.08</line>
			<line>1.45,-3.08,1.77,-2.71</line>
			<line>1.77,-2.71,2.03,-2.29</line>
			<line>2.03,-2.29,2.22,-1.83</line>
			<line>2.22,-1.83,2.32,-1.36</line>

			<circle>2.9,0,0.35,24</circle>

			<line>3.25,0,4,0</line>
		</shape>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>
	</gate>
	<gate> <name>DO_NANDX8</name>
		<caption>8-input NANDX</caption>
		<input> <name>IN_0</name>
		          <point>-3,3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,1.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,0.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-3,-0.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-3,-2.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-3,-3.5</point> 
		</input>
		<output> <name>OUT</name>
		          <point>4,0</point> 
		</output>
		<shape>
			<line>-1.83,3.5,-1.88,3.68</line>
			<line>-1.88,3.68,-2.01,3.8</line>
			<line>-2.01,3.8,-2.18,3.85</line>
			<line>-2.18,3.85,-2.36,3.8</line>
			<line>-2.36,3.8,-2.48,3.68</line>
			<line>-2.48,3.68,-2.53,3.5</line>
			<line>-2.53,3.5,-2.48,3.33</line>
			<line>-2.48,3.33,-2.36,3.2</line>
			<line>-2.36,3.2,-2.18,3.15</line>
			<line>-2.18,3.15,-2.01,3.2</line>
			<line>-2.01,3.2,-1.88,3.33</line>
			<line>-1.88,3.33,-1.83,3.5</line>
			<line>-2.53,3.5,-3,3.5</line>
			<line>-1.51,2.5,-1.56,2.68</line>
			<line>-1.56,2.68,-1.69,2.8</line>
			<line>-1.69,2.8,-1.86,2.85</line>
			<line>-1.86,2.85,-2.04,2.8</line>
			<line>-2.04,2.8,-2.16,2.68</line>
			<line>-2.16,2.68,-2.21,2.5</line>
			<line>-2.21,2.5,-2.16,2.33</line>
			<line>-2.16,2.33,-2.04,2.2</line>
			<line>-2.04,2.2,-1.86,2.15</line>
			<line>-1.86,2.15,-1.69,2.2</line>
			<line>-1.69,2.2,-1.56,2.33</line>
			<line>-1.56,2.33,-1.51,2.5</line>
			<line>-3,2.5,-2.19,2.5</line>
			<line>-1.27,1.5,-1.32,1.68</line>
			<line>-1.32,1.68,-1.45,1.8</line>
			<line>-1.45,1.8,-1.62,1.85</line>
			<line>-1.62,1.85,-1.8,1.8</line>
			<line>-1.8,1.8,-1.92,1.68</line>
			<line>-1.92,1.68,-1.97,1.5</line>
			<line>-1.97,1.5,-1.92,1.33</line>
			<line>-1.92,1.33,-1.8,1.2</line>
			<line>-1.8,1.2,-1.62,1.15</line>
			<line>-1.62,1.15,-1.45,1.2</line>
			<line>-1.45,1.2,-1.32,1.33</line>
			<line>-1.32,1.33,-1.27,1.5</line>
			<line>-1.97,1.5,-3,1.5</line>
			<line>-1.16,0.5,-1.21,0.68</line>
			<line>-1.21,0.68,-1.34,0.8</line>
			<line>-1.34,0.8,-1.51,0.85</line>
			<line>-1.51,0.85,-1.69,0.8</line>
			<line>-1.69,0.8,-1.81,0.68</line>
			<line>-1.81,0.68,-1.86,0.5</line>
			<line>-1.86,0.5,-1.81,0.33</line>
			<line>-1.81,0.33,-1.69,0.2</line>
			<line>-1.69,0.2,-1.51,0.15</line>
			<line>-1.51,0.15,-1.34,0.2</line>
			<line>-1.34,0.2,-1.21,0.33</line>
			<line>-1.21,0.33,-1.16,0.5</line>
			<line>-1.86,0.5,-3,0.5</line>
			<line>-1.16,-0.5,-1.21,-0.33</line>
			<line>-1.21,-0.33,-1.34,-0.2</line>
			<line>-1.34,-0.2,-1.51,-0.15</line>
			<line>-1.51,-0.15,-1.69,-0.2</line>
			<line>-1.69,-0.2,-1.81,-0.33</line>
			<line>-1.81,-0.33,-1.86,-0.5</line>
			<line>-1.86,-0.5,-1.81,-0.68</line>
			<line>-1.81,-0.68,-1.69,-0.8</line>
			<line>-1.69,-0.8,-1.51,-0.85</line>
			<line>-1.51,-0.85,-1.34,-0.8</line>
			<line>-1.34,-0.8,-1.21,-0.68</line>
			<line>-1.21,-0.68,-1.16,-0.5</line>
			<line>-1.86,-0.5,-3,-0.5</line>
			<line>-1.27,-1.5,-1.32,-1.33</line>
			<line>-1.32,-1.33,-1.45,-1.2</line>
			<line>-1.45,-1.2,-1.62,-1.15</line>
			<line>-1.62,-1.15,-1.8,-1.2</line>
			<line>-1.8,-1.2,-1.92,-1.33</line>
			<line>-1.92,-1.33,-1.97,-1.5</line>
			<line>-1.97,-1.5,-1.92,-1.68</line>
			<line>-1.92,-1.68,-1.8,-1.8</line>
			<line>-1.8,-1.8,-1.62,-1.85</line>
			<line>-1.62,-1.85,-1.45,-1.8</line>
			<line>-1.45,-1.8,-1.32,-1.68</line>
			<line>-1.32,-1.68,-1.27,-1.5</line>
			<line>-1.97,-1.5,-3,-1.5</line>
			<line>-1.51,-2.5,-1.56,-2.33</line>
			<line>-1.56,-2.33,-1.69,-2.2</line>
			<line>-1.69,-2.2,-1.86,-2.15</line>
			<line>-1.86,-2.15,-2.04,-2.2</line>
			<line>-2.04,-2.2,-2.16,-2.33</line>
			<line>-2.16,-2.33,-2.21,-2.5</line>
			<line>-2.21,-2.5,-2.16,-2.68</line>
			<line>-2.16,-2.68,-2.04,-2.8</line>
			<line>-2.04,-2.8,-1.86,-2.85</line>
			<line>-1.86,-2.85,-1.69,-2.8</line>
			<line>-1.69,-2.8,-1.56,-2.68</line>
			<line>-1.56,-2.68,-1.51,-2.5</line>
			<line>-3,-2.5,-2.19,-2.5</line>
			<line>-1.84,-3.5,-1.89,-3.33</line>
			<line>-1.89,-3.33,-2.02,-3.2</line>
			<line>-2.02,-3.2,-2.19,-3.15</line>
			<line>-2.19,-3.15,-2.37,-3.2</line>
			<line>-2.37,-3.2,-2.49,-3.33</line>
			<line>-2.49,-3.33,-2.54,-3.5</line>
			<line>-2.54,-3.5,-2.49,-3.68</line>
			<line>-2.49,-3.68,-2.37,-3.8</line>
			<line>-2.37,-3.8,-2.19,-3.85</line>
			<line>-2.19,-3.85,-2.02,-3.8</line>
			<line>-2.02,-3.8,-1.89,-3.68</line>
			<line>-1.89,-3.68,-1.84,-3.5</line>
			<line>-2.53,-3.5,-3,-3.5</line>
			<line>-2,-4,-1.63,-3</line>
			<line>-1.63,-3,-1.27,-1.51</line>
			<line>-1.27,-1.51,-1.2,-1</line>
			<line>-1.2,-1,-1.15,0</line>
			<line>-1.15,0,-1.2,1</line>
			<line>-1.2,1,-1.27,1.51</line>
			<line>-1.27,1.51,-1.63,3</line>
			<line>-1.63,3,-2,4</line>
			<line>-2,4,-0.77,4</line>
			<line>-2,-4,-0.77,-4</line>
			<line>2.32,1.36,2.22,1.83</line>
			<line>2.22,1.83,2.03,2.29</line>
			<line>2.03,2.29,1.77,2.71</line>
			<line>1.77,2.71,1.45,3.08</line>
			<line>1.45,3.08,1.08,3.4</line>
			<line>1.08,3.4,0.66,3.66</line>
			<line>0.66,3.66,0.2,3.85</line>
			<line>0.2,3.85,-0.28,3.96</line>
			<line>-0.28,3.96,-0.77,4</line>
			<line>2.32,1.36,2.55,0</line>
			<line>2.55,0,2.32,-1.36</line>
			<line>-0.77,-4,-0.28,-3.96</line>
			<line>-0.28,-3.96,0.2,-3.85</line>
			<line>0.2,-3.85,0.66,-3.66</line>
			<line>0.66,-3.66,1.08,-3.4</line>
			<line>1.08,-3.4,1.45,-3.08</line>
			<line>1.45,-3.08,1.77,-2.71</line>
			<line>1.77,-2.71,2.03,-2.29</line>
			<line>2.03,-2.29,2.22,-1.83</line>
			<line>2.22,-1.83,2.32,-1.36</line>
			<line>2.55,0,4,0</line>
		</shape>
	</gate>
	<gate> <name>DU_NORX8</name>
		<caption>8-input NORX</caption>
		<logic_type>OR</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3.00,2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3.00,1.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3.00,0.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-3.00,-0.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-3.00,-1.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-3.00,-2.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-3.00,-3.5</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3.00,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<offset> <point>-3.00,3.5</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,2.5</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,1.5</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,0.5</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,-0.5</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,-1.5</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,-2.5</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>
			<offset> <point>-3.00,-3.5</point>
				<line>0,0,0.3,0</line>
				<circle>0.65,0,0.35,24</circle>
			</offset>

			<line>-2,4,-2,-4</line>
			<line>-2,4,0,4</line>
			<line>-2,-4,0,-4</line>
			<line>2,2,1.98,2.31</line>
			<line>1.98,2.31,1.9,2.62</line>
			<line>1.9,2.62,1.78,2.91</line>
			<line>1.78,2.91,1.62,3.18</line>
			<line>1.62,3.18,1.41,3.41</line>
			<line>1.41,3.41,1.18,3.62</line>
			<line>1.18,3.62,0.91,3.78</line>
			<line>0.91,3.78,0.62,3.9</line>
			<line>0.62,3.9,0.31,3.98</line>
			<line>0.31,3.98,0,4</line>
			<line>2,2,2,-2</line>
			<line>0,-4,0.31,-3.98</line>
			<line>0.31,-3.98,0.62,-3.9</line>
			<line>0.62,-3.9,0.91,-3.78</line>
			<line>0.91,-3.78,1.18,-3.62</line>
			<line>1.18,-3.62,1.41,-3.41</line>
			<line>1.41,-3.41,1.62,-3.18</line>
			<line>1.62,-3.18,1.78,-2.91</line>
			<line>1.78,-2.91,1.9,-2.62</line>
			<line>1.9,-2.62,1.98,-2.31</line>
			<line>1.98,-2.31,2,-2</line>
			<line>2,0,3.00,0</line>
		</shape>
	</gate>
</library>
<library> <name>2 - Invert &amp; Connect</name>
	<gate> <name>AA_INVERTER</name>
		<caption>Inverter</caption>
		<logic_type>BUFFER</logic_type>
		<logic_param>INPUT_BITS 1</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,0</point> 
		</input>
		<output> <name>OUT_0</name>
		          <point>3.00,0</point>
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-3.00,0,-2,0</line>
			<line>-2,2,-2,-2</line>
			<line>-2,2,1.5,0</line>
			<line>-2,-2,1.5,0</line>

			<circle>1.85,0,0.35,24</circle>

			<line>3.00,0,2.2,0</line>
		</shape>
	</gate>
	<gate> <name>AE_SMALL_INVERTER</name>
		<caption>Small Inverter</caption>
		<logic_type>BUFFER</logic_type>
		<logic_param>INPUT_BITS 1</logic_param>
		<logic_param>DEFAULT_DELAY 1</logic_param>
		<input> <name>IN_0</name>
		          <point>-2,0</point> 
		</input>
		<output> <name>OUT_0</name>
		          <point>2,0</point> 
			<inverted>true</inverted>
		</output>
		<shape>
			<line>-2,0,-1,0</line>
			<line>-1,1,-1,-1</line>
			<line>-1,1,0.67,0</line>
			<line>-1,-1,0.67,0</line>

			<circle>1.02,0,0.35,24</circle>

			<line>1.37,0,2,0</line>
		</shape>
	</gate>
	<gate> <name>AI_INVERTER_4BIT</name>
		<caption>4-Bit Inverter</caption>
		<logic_type>BUFFER</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>

		<input> <name>IN_0</name>
		          <point>-2.0,-1.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-2.0,-0.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-2.0,0.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-2.0,1.5</point> 
		</input>

		<output> <name>OUT_0</name>
		          <point>2.0,-1.5</point>
			<inverted>true</inverted>
		</output>
		<output> <name>OUT_1</name>
		          <point>2.0,-0.5</point>
			<inverted>true</inverted>
		</output>
		<output> <name>OUT_2</name>
		          <point>2.0,0.5</point>
			<inverted>true</inverted>
		</output>
		<output> <name>OUT_3</name>
		          <point>2.0,1.5</point>
			<inverted>true</inverted>
		</output>

		<shape>
			<line>-1,-2,-1,2</line>
			<line>-1,2,1,2</line>
			<line>1,2,1,-2</line>
			<line>1,-2,-1,-2</line>

			<line>-2,-1.5,-1,-1.5</line>
			<line>-2,-0.5,-1,-0.5</line>
			<line>-2,0.5,-1,0.5</line>
			<line>-2,1.5,-1,1.5</line>

			<line>2,-1.5,1,-1.5</line>
			<line>2,-0.5,1,-0.5</line>
			<line>2,0.5,1,0.5</line>
			<line>2,1.5,1,1.5</line>

			<offset> <point>0,1.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<circle>0.51,0,0.18,24</circle>

			<line>.69,0,1,0</line>
			</offset>

			<offset> <point>0,-0.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<circle>0.51,0,0.18,24</circle>

			<line>.69,0,1,0</line>
			</offset>

			<offset> <point>0,-1.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<circle>0.51,0,0.18,24</circle>

			<line>.69,0,1,0</line>
			</offset>


			<offset> <point>0,0.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<circle>0.51,0,0.18,24</circle>

			<line>.69,0,1,0</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>BA_TRI_STATE</name>
		<caption>Tri-State Buffer - High Active Enable</caption>
		<logic_type>BUFFER</logic_type>
		<logic_param>INPUT_BITS 1</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,0</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>0,2</point> 
		</input>
		<output> <name>OUT_0</name>
		          <point>2.5,0</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<shape>
			<line>-3.00,0,-2,0</line>
			<line>-2,2,-2,-2</line>
			<line>-2,2,1.5,0</line>
			<line>-2,-2,1.5,0</line>

			<line>0,0.857143,0,2</line>

			<line>2.5,0,1.5,0</line>
		</shape>
	</gate>
	<gate> <name>BE_TRI_STATE_LOW</name>
		<caption>Tri-State Buffer - Low Active Enable</caption>
		<logic_type>BUFFER</logic_type>
		<logic_param>INPUT_BITS 1</logic_param>
		<input> <name>IN_0</name>
		          <point>-3.00,0</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>0,2</point>
			<inverted>true</inverted>
		</input>
		<output> <name>OUT_0</name>
		          <point>2.5,0</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<shape>
			<line>-3.00,0,-2,0</line>
			<line>-2,2,-2,-2</line>
			<line>-2,2,1.5,0</line>
			<line>-2,-2,1.5,0</line>

			<line>0,1.6,0,2</line>

			<circle>0,1.25,0.35,24</circle>

			<line>2.5,0,1.5,0</line>
		</shape>
	</gate>
	<gate> <name>BI_TRI_STATE_4BIT</name>
		<caption>4-Bit Tri-State Bus - High Active Enable </caption>
		<logic_type>BUFFER</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>

		<input> <name>IN_0</name>
		          <point>-2.0,-1.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-2.0,-0.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-2.0,0.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-2.0,1.5</point> 
		</input>

		<input> <name>ENABLE_0</name>
		          <point>0,3</point>
		</input>

		<output> <name>OUT_0</name>
		          <point>2.0,-1.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_1</name>
		          <point>2.0,-0.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_2</name>
		          <point>2.0,0.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_3</name>
		          <point>2.0,1.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<shape>
			<line>-1,-2,-1,2</line>
			<line>-1,2,1,2</line>
			<line>1,2,1,-2</line>
			<line>1,-2,-1,-2</line>

			<line>-2,-1.5,-1,-1.5</line>
			<line>-2,-0.5,-1,-0.5</line>
			<line>-2,0.5,-1,0.5</line>
			<line>-2,1.5,-1,1.5</line>

			<line>2,-1.5,1,-1.5</line>
			<line>2,-0.5,1,-0.5</line>
			<line>2,0.5,1,0.5</line>
			<line>2,1.5,1,1.5</line>

			<line>0,-1.28,0,3</line>

			<offset> <point>0,1.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>

			</offset>


			<offset> <point>0,-0.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,-1.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,0.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>BO_TRI_STATE_8BIT</name>
		<caption>8-Bit Tri-State Bus - High Active Enable </caption>
		<logic_type>BUFFER</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>

		<input> <name>IN_0</name>
		          <point>-2.0,-3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-2.0,-2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-2.0,-1.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-2.0,-0.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-2.0,0.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-2.0,1.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-2.0,2.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-2.0,3.5</point> 
		</input>

		<input> <name>ENABLE_0</name>
		          <point>0,5</point>
		</input>

		<output> <name>OUT_0</name>
		          <point>2.0,-3.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_1</name>
		          <point>2.0,-2.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_2</name>
		          <point>2.0,-1.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_3</name>
		          <point>2.0,-0.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_4</name>
		          <point>2.0,0.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_5</name>
		          <point>2.0,1.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_6</name>
		          <point>2.0,2.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_7</name>
		          <point>2.0,3.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<shape>
			<line>-1,-4,-1,4</line>
			<line>-1,4,1,4</line>
			<line>1,4,1,-4</line>
			<line>1,-4,-1,-4</line>

			<line>-2,-3.5,-1,-3.5</line>
			<line>-2,-2.5,-1,-2.5</line>
			<line>-2,-1.5,-1,-1.5</line>
			<line>-2,-0.5,-1,-0.5</line>
			<line>-2,0.5,-1,0.5</line>
			<line>-2,1.5,-1,1.5</line>
			<line>-2,2.5,-1,2.5</line>
			<line>-2,3.5,-1,3.5</line>

			<line>2,-3.5,1,-3.5</line>
			<line>2,-2.5,1,-2.5</line>
			<line>2,-1.5,1,-1.5</line>
			<line>2,-0.5,1,-0.5</line>
			<line>2,0.5,1,0.5</line>
			<line>2,1.5,1,1.5</line>
			<line>2,2.5,1,2.5</line>
			<line>2,3.5,1,3.5</line>

			<line>0,-3.28,0,5</line>

			<offset> <point>0,3.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>

			</offset>


			<offset> <point>0,2.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,1.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,0.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>
		
			<offset> <point>0,-0.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>

			</offset>

			<offset> <point>0,-1.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,-2.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,-3.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>BU_TRI_STATE_16BIT</name>
		<caption>16-Bit Tri-State Bus - High Active Enable</caption>
		<logic_type>BUFFER</logic_type>
		<logic_param>INPUT_BITS 16</logic_param>

		<input> <name>IN_0</name>
		          <point>-2.0,-7.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-2.0,-6.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-2.0,-5.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-2.0,-4.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-2.0,-3.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-2.0,-2.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-2.0,-1.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-2.0,-0.5</point> 
		</input>
		<input> <name>IN_8</name>
		          <point>-2.0,0.5</point> 
		</input>
		<input> <name>IN_9</name>
		          <point>-2.0,1.5</point> 
		</input>
		<input> <name>IN_10</name>
		          <point>-2.0,2.5</point> 
		</input>
		<input> <name>IN_11</name>
		          <point>-2.0,3.5</point> 
		</input>
		<input> <name>IN_12</name>
		          <point>-2.0,4.5</point> 
		</input>
		<input> <name>IN_13</name>
		          <point>-2.0,5.5</point> 
		</input>
		<input> <name>IN_14</name>
		          <point>-2.0,6.5</point> 
		</input>
		<input> <name>IN_15</name>
		          <point>-2.0,7.5</point> 
		</input>

		<input> <name>ENABLE_0</name>
		          <point>0,9</point>
		</input>

		<output> <name>OUT_0</name>
		          <point>2.0,-7.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_1</name>
		          <point>2.0,-6.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_2</name>
		          <point>2.0,-5.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_3</name>
		          <point>2.0,-4.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_4</name>
		          <point>2.0,-3.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_5</name>
		          <point>2.0,-2.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_6</name>
		          <point>2.0,-1.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_7</name>
		          <point>2.0,-0.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_8</name>
		          <point>2.0,0.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_9</name>
		          <point>2.0,1.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_10</name>
		          <point>2.0,2.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_11</name>
		          <point>2.0,3.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_12</name>
		          <point>2.0,4.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_13</name>
		          <point>2.0,5.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_14</name>
		          <point>2.0,6.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_15</name>
		          <point>2.0,7.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>

		<shape>
			<line>-1,-8,-1,8</line>
			<line>-1,8,1,8</line>
			<line>1,8,1,-8</line>
			<line>1,-8,-1,-8</line>

			<line>0,-7.28,0,9</line>

			<line>-2,-7.5,-1,-7.5</line>
			<line>-2,-6.5,-1,-6.5</line>
			<line>-2,-5.5,-1,-5.5</line>
			<line>-2,-4.5,-1,-4.5</line>
			<line>-2,-3.5,-1,-3.5</line>
			<line>-2,-2.5,-1,-2.5</line>
			<line>-2,-1.5,-1,-1.5</line>
			<line>-2,-0.5,-1,-0.5</line>
			<line>-2,0.5,-1,0.5</line>
			<line>-2,1.5,-1,1.5</line>
			<line>-2,2.5,-1,2.5</line>
			<line>-2,3.5,-1,3.5</line>
			<line>-2,4.5,-1,4.5</line>
			<line>-2,5.5,-1,5.5</line>
			<line>-2,6.5,-1,6.5</line>
			<line>-2,7.5,-1,7.5</line>

			<line>2,-7.5,1,-7.5</line>
			<line>2,-6.5,1,-6.5</line>
			<line>2,-5.5,1,-5.5</line>
			<line>2,-4.5,1,-4.5</line>
			<line>2,-3.5,1,-3.5</line>
			<line>2,-2.5,1,-2.5</line>
			<line>2,-1.5,1,-1.5</line>
			<line>2,-0.5,1,-0.5</line>
			<line>2,0.5,1,0.5</line>
			<line>2,1.5,1,1.5</line>
			<line>2,2.5,1,2.5</line>
			<line>2,3.5,1,3.5</line>
			<line>2,4.5,1,4.5</line>
			<line>2,5.5,1,5.5</line>
			<line>2,6.5,1,6.5</line>
			<line>2,7.5,1,7.5</line>

			<offset> <point>0,-7.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,-6.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,-5.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>
		
			<offset> <point>0,-4.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>

			</offset>

			<offset> <point>0,-3.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,-2.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,-1.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>

			<offset> <point>0,-0.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>
	
			<offset> <point>0,7.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,6.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,5.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>
		
			<offset> <point>0,4.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>

			</offset>

			<offset> <point>0,3.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,2.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>


			<offset> <point>0,1.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>

			<offset> <point>0,0.5</point>
			<line>-1,0,-0.5,0</line>
			<line>-0.5,0.5,-0.5,-0.5</line>
			<line>-0.5,0.5,0.34,0</line>
			<line>-0.5,-0.5,0.34,0</line>

			<line>.34,0,1,0</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>CA_SMALL_TGATE</name>
<!-- #NOTE: Needs a large t-gate shape? -->
		<caption>T-Gate</caption>
		<input> <name>T_in</name>
		          <point>-2,0</point> 
		</input>
		<input> <name>T_in2</name>
		          <point>2,0</point> 
		</input>
		<input> <name>T_ctrl</name>
		          <point>0,1</point> 
		</input>
		<shape>
			<line>-2,0,-1,0</line>

			<line>-1,1,-1,-1</line>
			<line>-1,1,1,0</line>
			<line>-1,-1,1,0</line>

			<line>1,1,1,-1</line>
			<line>1,1,-1,0</line>
			<line>1,-1,-1,0</line>

			<line>0,0.5,0,1</line>

			<line>1,0,2,0</line>
		</shape>
		<logic_type>TGATE</logic_type>
		<logic_param>DEFAULT_DELAY 1</logic_param>
	</gate>
<!-- #	<gate> <name>CE_SMALL_TGATE_LOW</name> -->
<!-- #		<caption>T-Gate - Low Active Enable (TODO)</caption> -->
<!-- #	</gate> -->
	<gate> <name>DA_FROM</name>
		<caption>"From" Named Link</caption>
		<gui_type>FROM</gui_type>
		<logic_type>FROM</logic_type>
		<logic_param>JUNCTION_ID F</logic_param>
		<param_dlg_data>
			<param>
				<type>STRING</type>
				<label>Label</label>
<!-- # Specify the type (LOGIC or GUI) and the param's name: -->
				<varname>LOGIC JUNCTION_ID</varname>
			</param>
		</param_dlg_data>
		<input> <name>IN_0</name>
		          <point>2,0</point> 
		</input>
		<shape>
			<line>0,1,1,0</line>
			<line>0,-1,1,0</line>
			<line>1,0,2,0</line>
		</shape>
	</gate>
	<gate> <name>DE_TO</name>
		<caption>"To" Named Link</caption>
		<gui_type>TO</gui_type>
		<logic_type>TO</logic_type>
		<logic_param>JUNCTION_ID TO</logic_param>
		<param_dlg_data>
			<param>
				<type>STRING</type>
				<label>Label</label>
<!-- # Specify the type (LOGIC or GUI) and the param's name: -->
				<varname>LOGIC JUNCTION_ID</varname>
			</param>
		</param_dlg_data>
		<input> <name>IN_0</name>
		          <point>-2,0</point> 
		</input>
		<shape>
			<line>-1,1,0,0</line>
			<line>-1,-1,0,0</line>
			<line>-2,0,0,0</line>
		</shape>
	</gate>
	<gate> <name>HA_JUNC_2</name>
		<caption>2-way Junction</caption>
		<gui_type>LED</gui_type>
		<logic_type>NODE</logic_type>
		<gui_param>LED_BOX -0.25,-0.25,0.25,0.25</gui_param>
		<input> <name>N_in0</name>
		          <point>-1,0</point> 
		</input>
		<input> <name>N_in1</name>
		          <point>1,0</point> 
		</input>
		<shape>
			<line>-0.26,0.26,0.26,0.26</line>
			<line>0.26,0.26,0.26,-0.26</line>
			<line>0.26,-0.26,-0.26,-0.26</line>
			<line>-0.26,-0.26,-0.26,0.26</line>

			<line>-1,0,-0.26,0</line>
			<line>1,0,0.26,0</line>
		</shape>
	</gate>
	<gate> <name>HE_JUNC_4</name>
		<caption>4-way Junction</caption>
		<gui_type>LED</gui_type>
		<logic_type>NODE</logic_type>
		<gui_param>LED_BOX -0.25,-0.25,0.25,0.25</gui_param>
		<input> <name>N_in0</name>
		          <point>-1,0</point> 
		</input>
		<input> <name>N_in1</name>
		          <point>1,0</point> 
		</input>
		<input> <name>N_in2</name>
		          <point>0,-1</point> 
		</input>
		<input> <name>N_in3</name>
		          <point>0,1</point> 
		</input>
		<shape>
			<line>-0.26,0.26,0.26,0.26</line>
			<line>0.26,0.26,0.26,-0.26</line>
			<line>0.26,-0.26,-0.26,-0.26</line>
			<line>-0.26,-0.26,-0.26,0.26</line>

			<line>-1,0,-0.26,0</line>
			<line>1,0,0.26,0</line>
			<line>0,-1,0,-0.26</line>
			<line>0,1,0,0.26</line>
		</shape>
	</gate>
	<gate> <name>VA_NMOS</name>
		<caption>Simplified nMOS Transistor</caption>
		<logic_type>TGATE</logic_type>
		<logic_param>DEFAULT_DELAY 1</logic_param>
		<input> <name>T_in</name>
		          <point>-1,-1</point> 
		</input>
		<input> <name>T_in2</name>
		          <point>1,-1</point> 
		</input>
		<input> <name>T_ctrl</name>
		          <point>0,2</point> 
		</input>
		<shape>
			<line>-1,-1,-0.7,-1</line>
			<line>-0.7,-1,-0.7,0.7</line>
			<line>-0.7,0.7,0.7,0.7</line>
			<line>0.7,0.7,0.7,-1</line>
			<line>0.7,-1,1,-1</line>

			<line>-0.7,1,0.7,1</line>
			<line>0,1,0,2</line>
		</shape>
	</gate>
	<gate> <name>VE_PMOS</name>
		<caption>Simplified pMOS Transistor</caption>
		<logic_type>TGATE</logic_type>
		<logic_param>DEFAULT_DELAY 1</logic_param>
		<input> <name>T_in</name>
		          <point>-1,-1</point> 
		</input>
		<input> <name>T_in2</name>
		          <point>1,-1</point> 
		</input>
		<input> <name>T_ctrl</name>
		          <point>0,2</point> 
			<inverted>true</inverted>
		</input>
		<shape>
			<line>-1,-1,-0.7,-1</line>
			<line>-0.7,-1,-0.7,0.7</line>
			<line>-0.7,0.7,0.7,0.7</line>
			<line>0.7,0.7,0.7,-1</line>
			<line>0.7,-1,1,-1</line>

			<line>-0.7,1,0.7,1</line>
			<circle>0,1.25,0.25,24</circle>
			<line>0,1.5,0,2</line>
		</shape>
	</gate>
</library>
<library> <name>3 - Input and Output</name>
	<gate> <name>AA_TOGGLE</name>
		<caption>On / Off Toggle Switch</caption>
		<gui_type>TOGGLE</gui_type>
		<logic_type>DRIVER</logic_type>
		<logic_param>OUTPUT_BITS 1</logic_param>
		<logic_param>OUTPUT_NUM 0</logic_param>
		<output> <name>OUT_0</name>
		          <point>2,0</point> 
		</output>
		<shape>
			<line>-1,1,-1,-1</line>
			<line>-1,1,1,1</line>
			<line>-1,-1,1,-1</line>
			<line>1,1,2,0</line>
			<line>1,-1,2,0</line>

			<line>-0.76,-0.76,-0.76,0.76</line>
			<line>-0.76,0.76,0.76,0.76</line>
			<line>0.76,0.76,0.76,-0.76</line>
			<line>0.76,-0.76,-0.76,-0.76</line>
		</shape>
	</gate>
	<gate> <name>BB_CLOCK</name>
		<caption>Variable-Rate Square Wave Clock</caption>
		<logic_type>CLOCK</logic_type>
		<logic_param>HALF_CYCLE 5</logic_param>
		<output> <name>CLK</name>
		          <point>4,0</point> 
		</output>
		<param_dlg_data>
			<param>
				<type>INT</type>
				<label>Half-period</label>
<!-- # Specify the type (LOGIC or GUI) and the param's name: -->
				<varname>LOGIC HALF_CYCLE</varname>
<!-- # range tags list min,max: -->
				<range>1,5000000</range>
			</param>
		</param_dlg_data>
		<shape>
			<line>-2.25,2,-2.25,-2</line>
			<line>-2.25,2,2.25,2</line>
			<line>-2.25,-2,2.25,-2</line>
			<line>2.25,2,2.25,-2</line>
			<line>-1.5,-1,-0.88,-1</line>
			<line>-0.88,-1,-0.88,1</line>
			<line>-0.88,1,0.88,1</line>
			<line>0.88,1,0.88,-1</line>
			<line>0.88,-1,1.5,-1</line>
			<line>2.25,0,4,0</line>
		</shape>
	</gate>
	<gate> <name>CC_PULSE</name>
		<caption>Single-Pulse Generator</caption>
		<gui_type>PULSE</gui_type>
		<logic_type>PULSE</logic_type>
		<gui_param>CLICK_BOX -0.75,-0.75,0.75,0.75</gui_param>
		<gui_param>PULSE_WIDTH 1</gui_param>
		<param_dlg_data>
			<param>
				<type>INT</type>
				<label>Pulse Width</label>
				<varname>GUI PULSE_WIDTH</varname>
				<range>1,500</range>
			</param>
		</param_dlg_data>
		<output> <name>OUT_0</name>
		          <point>2,0</point> 
		</output>
		<shape>
			<line>-1,1,-1,-1</line>
			<line>-1,1,1,1</line>
			<line>-1,-1,1,-1</line>
			<line>1,1,2,0</line>
			<line>1,-1,2,0</line>
			
			<offset><point>-0.25,0</point>
			<line>1,1,2,0</line>
			<line>1,-1,2,0</line>
			</offset>

<!-- # The button outline: -->
			<line>-0.76,-0.76,-0.76,0.76</line>
			<line>-0.76,0.76,0.76,0.76</line>
			<line>0.76,0.76,0.76,-0.76</line>
			<line>0.76,-0.76,-0.76,-0.76</line>

<!-- # The clock pulse shape: -->
			<line>-0.5,-0.5,-0.1,-0.5</line>
			<line>-0.1,-0.5,-0.1,0.5</line>
			<line>-0.1,0.5,0.1,0.5</line>
			<line>0.1,0.5,0.1,-0.5</line>
			<line>0.1,-0.5,0.5,-0.5</line>
		</shape>
	</gate>
	<gate> <name>DD_KEYPAD_HEX</name>
		<caption>4-bit Hex Keypad</caption>
		<logic_type>DRIVER</logic_type>
		<logic_param>OUTPUT_BITS 4</logic_param>
		<logic_param>OUTPUT_NUM 0</logic_param>
		<gui_type>KEYPAD</gui_type>
<!-- #KEYPAD_BOX params.  One for each val, format "minx,miny,maxx,maxy" -->
		<gui_param>KEYPAD_BOX_0 -3.65,3.05,-2.05,5.65</gui_param>
		<gui_param>KEYPAD_BOX_1 -1.76,3.05,-0.16,5.65</gui_param>
		<gui_param>KEYPAD_BOX_2 0.15,3.05,1.75,5.65</gui_param>
		<gui_param>KEYPAD_BOX_3 2.05,3.05,3.65,5.65</gui_param>
		<gui_param>KEYPAD_BOX_4 -3.65,0.15,-2.05,2.75</gui_param>
		<gui_param>KEYPAD_BOX_5 -1.76,0.15,-0.16,2.75</gui_param>
		<gui_param>KEYPAD_BOX_6 0.15,0.15,1.75,2.75</gui_param>
		<gui_param>KEYPAD_BOX_7 2.05,0.15,3.65,2.75</gui_param>
		<gui_param>KEYPAD_BOX_8 -3.65,-2.75,-2.05,-0.15</gui_param>
		<gui_param>KEYPAD_BOX_9 -1.76,-2.75,-0.16,-0.15</gui_param>
		<gui_param>KEYPAD_BOX_A 0.15,-2.75,1.75,-0.15</gui_param>
		<gui_param>KEYPAD_BOX_B 2.05,-2.75,3.65,-0.15</gui_param>
		<gui_param>KEYPAD_BOX_C -3.65,-5.65,-2.05,-3.05</gui_param>
		<gui_param>KEYPAD_BOX_D -1.76,-5.65,-0.16,-3.05</gui_param>
		<gui_param>KEYPAD_BOX_E 0.15,-5.65,1.75,-3.05</gui_param>
		<gui_param>KEYPAD_BOX_F 2.05,-5.65,3.65,-3.05</gui_param>

		<output> <name>OUT_0</name>
		          <point>5.00,-3.00</point> 
		</output>
		<output> <name>OUT_1</name>
		          <point>5.00,-1.00</point> 
		</output>
		<output> <name>OUT_2</name>
		          <point>5.00,1.00</point> 
		</output>
		<output> <name>OUT_3</name>
		          <point>5.00,3.00</point> 
		</output>

		<shape>
<!-- #0 -->
			<offset> <point>-3.65,3.05</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>1.3,2.3,1.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #1 -->
			<offset> <point>-1.76,3.05</point>
			<line>1.3,0.3,1.3,1.3</line>
			<line>1.3,1.3,1.3,2.3</line>
			</offset>

<!-- #2 -->
			<offset> <point>0.15,3.05</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>1.3,2.3,1.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			</offset>

<!-- #3 -->
			<offset> <point>2.05,3.05</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>1.3,2.3,1.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #4 -->
			<offset> <point>-3.65,0.15</point>
			<line>0.3,1.3,1.3,1.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>1.3,2.3,1.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #5 -->
			<offset> <point>-1.76,0.15</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #6 -->
			<offset> <point>0.15,0.15</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #7 -->
			<offset> <point>2.05,0.15</point>
			<line>0.3,2.3,1.3,2.3</line>
			
			<line>1.3,2.3,1.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #8 -->
			<offset> <point>-3.65,-2.75</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>1.3,2.3,1.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #9 -->
			<offset> <point>-1.76,-2.75</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>1.3,2.3,1.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #A -->
			<offset> <point>0.15,-2.75</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>1.3,2.3,1.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #B -->
			<offset> <point>2.05,-2.75</point>
			<line>0.3,1.3,1.3,1.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #C -->
			<offset> <point>-3.65,-5.65</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			</offset>

<!-- #D -->
			<offset> <point>-1.76,-5.65</point>
			<line>0.3,1.3,1.3,1.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>1.3,2.3,1.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			<line>1.3,0.3,1.3,1.3</line>
			</offset>

<!-- #E -->
			<offset> <point>0.15,-5.65</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			<line>0.3,0.3,1.3,0.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			</offset>

<!-- #F -->
			<offset> <point>2.05,-5.65</point>
			<line>0.3,2.3,1.3,2.3</line>
			<line>0.3,1.3,1.3,1.3</line>
			
			<line>0.3,2.3,0.3,1.3</line>
			<line>0.3,0.3,0.3,1.3</line>
			</offset>

<!-- #lines for outer box -->
			<line>-3.95,6.00,-3.95,-6.00</line>
			<line>-3.95,-6.00,3.88,-6.00</line>
			<line>3.88,-6.00,3.88,6.00</line>
			<line>3.88,6.00,-3.95,6.00</line>

<!-- #lines to hotspots -->
			<line>3.88,-3.00,5.00,-3.00</line>
			<line>3.88,-1.00,5.00,-1.00</line>
			<line>3.88,1.00,5.00,1.00</line>
			<line>3.88,3.00,5.00,3.00</line>
		</shape>
	</gate>
	<gate> <name>EE_VDD</name>
		<caption>Power (Vdd)</caption>
		<logic_type>DRIVER</logic_type>
		<logic_param>OUTPUT_BITS 1</logic_param>
		<logic_param>OUTPUT_NUM 1</logic_param>
		<output> <name>OUT_0</name>
		          <point>0,-1</point>
		</output>
		<shape>
			<line>0,-1,0,0</line>

			<line>.6,0,-.6,0</line>
			<line>.6,0,0,.75</line>
			<line>-.6,0,0,.75</line>
		</shape>
	</gate>
	<gate> <name>FF_GND</name>
		<caption>Ground</caption>
		<logic_type>DRIVER</logic_type>
		<logic_param>OUTPUT_BITS 1</logic_param>
		<logic_param>OUTPUT_NUM 0</logic_param>
		<output> <name>OUT_0</name>
		          <point>0,1</point> 
		</output>
		<shape>
			<line>0,1,0,0</line>

			<line>.6,0,-.6,0</line>
			<line>.5,-.2,-.5,-.2</line>
			<line>.4,-.4,-.4,-.4</line>
			<line>.3,-.6,-.3,-.6</line>
		</shape>
	</gate>
	<gate> <name>GA_LED</name>
		<caption>LED</caption>
		<gui_type>LED</gui_type>
		<logic_type>NODE</logic_type>
		<gui_param>LED_BOX -0.76,-0.76,0.76,0.76</gui_param>
		<input> <name>N_in0</name>
		          <point>-1,0</point> 
		</input>
		<input> <name>N_in1</name>
		          <point>1,0</point> 
		</input>
		<input> <name>N_in2</name>
		          <point>0,-1</point> 
		</input>
		<input> <name>N_in3</name>
		          <point>0,1</point> 
		</input>
		<shape>
<!-- #			<line>-1,1,1,1</line> -->
<!-- #			<line>1,1,1,-1</line> -->
<!-- #			<line>1,-1,-1,-1</line> -->
<!-- #			<line>-1,-1,-1,1</line> -->

			<line>-1,-1,-1,-0.2</line>
			<line>-1,0.2,-1,1</line>
			<line>1,-1,0.2,-1</line>
			<line>-0.2,-1,-1,-1</line>
			<line>1,1,0.2,1</line>
			<line>-0.2,1,-1,1</line>
			<line>1,-1,1,-0.2</line>
			<line>1,1,1,0.2</line>


			<line>-0.76,-0.76,-0.76,0.76</line>
			<line>-0.76,0.76,0.76,0.76</line>
			<line>0.76,0.76,0.76,-0.76</line>
			<line>0.76,-0.76,-0.76,-0.76</line>
		</shape>
	</gate>
	<gate> <name>GE_LED_DISPLAY_4BIT</name>
		<caption>4-Bit LED Display</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<logic_param>NO_HOLD true</logic_param>
		<logic_param>SYNC_LOAD false</logic_param>
		<gui_type>REGISTER</gui_type>
		<gui_param>VALUE_BOX -1.9,-2.9,1.9,3.9</gui_param>

<!-- #		BUS IN -->
		<input> <name>IN_0</name>
		          <point>-3,-1</point> 
		</input>

		<input> <name>IN_1</name>
		          <point>-3,0</point> 
		</input>

		<input> <name>IN_2</name>
		          <point>-3,1</point> 
		</input>

		<input> <name>IN_3</name>
		          <point>-3,2</point> 
		</input>

<!-- #		BUS OUT -->
<!-- #		<output> <name>OUT_0</name> -->
<!-- #		          <point>3,-1</point>  -->
<!-- #		</output> -->

<!-- #		<output> <name>OUT_1</name> -->
<!-- #		          <point>3,0</point>  -->
<!-- #		</output> -->

<!-- #		<output> <name>OUT_2</name> -->
<!-- #		          <point>3,1</point>  -->
<!-- #		</output> -->

<!-- #		<output> <name>OUT_3</name> -->
<!-- #		          <point>3,2</point>  -->
<!-- #		</output> -->

		<shape>
<!-- # Border box: -->
			<line>-2,4,2,4</line>
			<line>2,4,2,-3</line>
			<line>2,-3,-2,-3</line>
			<line>-2,-3,-2,4</line>

<!-- # Input Lines: -->
			<line>-2,2,-3,2</line>
			<line>-2,1,-3,1</line>
			<line>-2,0,-3,0</line>			
			<line>-2,-1,-3,-1</line>
			
<!-- #			<line>2,2,3,2</line> -->
<!-- #			<line>2,1,3,1</line> -->
<!-- #			<line>2,0,3,0</line>			 -->
<!-- #			<line>2,-1,3,-1</line> -->

		</shape>
	</gate>
	<gate> <name>GF_LED_DISPLAY_4BIT_OUT</name>
		<caption>4-Bit LED Display, with pass-through bus</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<logic_param>NO_HOLD true</logic_param>
		<logic_param>SYNC_LOAD false</logic_param>
		<gui_type>REGISTER</gui_type>
		<gui_param>VALUE_BOX -1.9,-2.9,1.9,3.9</gui_param>

<!-- #		BUS IN -->
		<input> <name>IN_0</name>
		          <point>-3,-1</point> 
		</input>

		<input> <name>IN_1</name>
		          <point>-3,0</point> 
		</input>

		<input> <name>IN_2</name>
		          <point>-3,1</point> 
		</input>

		<input> <name>IN_3</name>
		          <point>-3,2</point> 
		</input>

<!-- #		BUS OUT -->
		<output> <name>OUT_0</name>
		          <point>1.5,-4</point> 
		</output>

		<output> <name>OUT_1</name>
		          <point>0.5,-4</point> 
		</output>

		<output> <name>OUT_2</name>
		          <point>-0.5,-4</point> 
		</output>

		<output> <name>OUT_3</name>
		          <point>-1.5,-4</point> 
		</output>

		<shape>
<!-- # Border box: -->
			<line>-2,4,2,4</line>
			<line>2,4,2,-3</line>
			<line>2,-3,-2,-3</line>
			<line>-2,-3,-2,4</line>

<!-- # Input Lines: -->
			<line>-2,2,-3,2</line>
			<line>-2,1,-3,1</line>
			<line>-2,0,-3,0</line>			
			<line>-2,-1,-3,-1</line>

<!-- # Output Lines: -->
			<line>-1.5,-3,-1.5,-4</line>
			<line>-0.5,-3,-0.5,-4</line>
			<line>0.5,-3,0.5,-4</line>
			<line>1.5,-3,1.5,-4</line>
		</shape>
	</gate>
	<gate> <name>GI_LED_DISPLAY_8BIT</name>
		<caption>8-Bit LED Display</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>
		<logic_param>NO_HOLD true</logic_param>
		<logic_param>SYNC_LOAD false</logic_param>
		<gui_type>REGISTER</gui_type>
		<gui_param>VALUE_BOX -3.9,-3.9,3.9,4.9</gui_param>

<!-- #		BUS IN -->
		<input> <name>IN_0</name>
		          <point>-5,-3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-5,-2</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-5,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-5,0</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-5,1</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-5,2</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-5,3</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-5,4</point> 
		</input>

<!-- #		BUS OUT -->
<!-- #		<output> <name>OUT_0</name> -->
<!-- #		          <point>3,-1</point>  -->
<!-- #		</output> -->

<!-- #		<output> <name>OUT_1</name> -->
<!-- #		          <point>3,0</point>  -->
<!-- #		</output> -->

<!-- #		<output> <name>OUT_2</name> -->
<!-- #		          <point>3,1</point>  -->
<!-- #		</output> -->

<!-- #		<output> <name>OUT_3</name> -->
<!-- #		          <point>3,2</point>  -->
<!-- #		</output> -->

		<shape>
<!-- # Border box: -->
			<line>-4,5,4,5</line>
			<line>4,5,4,-4</line>
			<line>4,-4,-4,-4</line>
			<line>-4,-4,-4,5</line>

<!-- # Input Lines: -->
			<line>-4,-3,-5,-3</line>
			<line>-4,-2,-5,-2</line>
			<line>-4,-1,-5,-1</line>
			<line>-4,0,-5,0</line>
			<line>-4,1,-5,1</line>
			<line>-4,2,-5,2</line>
			<line>-4,3,-5,3</line>
			<line>-4,4,-5,4</line>
			
<!-- #			<line>2,2,3,2</line> -->
<!-- #			<line>2,1,3,1</line> -->
<!-- #			<line>2,0,3,0</line>			 -->
<!-- #			<line>2,-1,3,-1</line> -->

		</shape>
	</gate>
</library>
<library> <name>8 - Registers</name>
	<gate> <name>AA_REGISTER4</name>
		<caption>4-Bit Counting Register</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<logic_param>MAX_COUNT 15</logic_param>
		<logic_param>SYNC_CLEAR true</logic_param>
		<logic_param>SYNC_LOAD true</logic_param>
		<gui_type>REGISTER</gui_type>
		<gui_param>VALUE_BOX -0.8,-0.8,0.8,1.8</gui_param>

		<param_dlg_data>
			<param>
				<type>INT</type>
				<label>Maximum Count Value</label>
				<varname>LOGIC MAX_COUNT</varname>
				<range>1,15</range>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Load Pin</label>
				<varname>LOGIC SYNC_LOAD</varname>
			</param>
		</param_dlg_data>


<!-- #		L -->
		<input> <name>load</name>
		          <point>-1,5</point> 
		</input>

<!-- #		C -->
		<input> <name>count_enable</name>
		          <point>0,5</point> 
		</input>

<!-- #		U -->
		<input> <name>count_up</name>
		          <point>1,5</point> 
		</input>

<!-- #		Cy -->
		<output> <name>carry_out</name>
		          <point>2,5</point> 
		</output>

<!-- #		CLOCK -->
		<input> <name>clock</name>
		          <point>-1,-4</point> 
		</input>

<!-- #		R -->
		<input> <name>clear</name>
		          <point>1,-4</point> 
		</input>

<!-- #		BUS IN -->
		<input> <name>IN_0</name>
		          <point>-4,-1</point> 
		</input>

		<input> <name>IN_1</name>
		          <point>-4,0</point> 
		</input>

		<input> <name>IN_2</name>
		          <point>-4,1</point> 
		</input>

		<input> <name>IN_3</name>
		          <point>-4,2</point> 
		</input>

<!-- #		BUS OUT -->
		<output> <name>OUT_0</name>
		          <point>4,-1</point> 
		</output>

		<output> <name>OUT_1</name>
		          <point>4,0</point> 
		</output>

		<output> <name>OUT_2</name>
		          <point>4,1</point> 
		</output>

		<output> <name>OUT_3</name>
		          <point>4,2</point> 
		</output>

		<shape>
			<line>-3,4,3,4</line>
			<line>3,4,3,-3</line>
			<line>3,-3,-3,-3</line>
			<line>-3,-3,-3,4</line>

			<line>-1,4,-1,5</line>
			<line>0,4,0,5</line>
			<line>1,4,1,5</line>
			<line>2,4,2,5</line>

<!-- # Input Bus -->
			<line>-3,2,-4,2</line>
			<line>-3,1,-4,1</line>
			<line>-3,0,-4,0</line>			
			<line>-3,-1,-4,-1</line>
			
			<line>-1,-3,-1,-4</line>			
			<line>1,-3,1,-4</line>

<!-- # Output Bus -->
			<line>3,2,4,2</line>
			<line>3,1,4,1</line>
			<line>3,0,4,0</line>			
			<line>3,-1,4,-1</line>

<!-- #			CLOCK -->
			<line>-0.5,-3,-1,-2</line>
			<line>-1.5,-3,-1,-2</line>

<!-- #			R -->
			<offset><point>0.8,-1.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			L -->
			<offset><point>-1.2,3.7</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			C -->
			<offset><point>-0.2,3.7</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			<line>0,0,0.4,0</line>
			</offset>

<!-- #			U -->
			<offset><point>0.8,3.7</point>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			C -->
			<offset><point>1.6,3.7</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			<line>0,0,0.4,0</line>
			</offset>

<!-- #			O -->
			<offset><point>2.1,3.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>2.3,-0.6</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>-2.7,-0.6</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>AE_REGISTER8</name>
		<caption>8-Bit Counting Register</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>
		<logic_param>MAX_COUNT 255</logic_param>
		<logic_param>SYNC_CLEAR true</logic_param>
		<logic_param>SYNC_LOAD true</logic_param>
		<gui_type>REGISTER</gui_type>
		<gui_param>VALUE_BOX -1.8,-0.8,1.8,1.8</gui_param>

		<param_dlg_data>
			<param>
				<type>INT</type>
				<label>Maximum Count Value</label>
				<varname>LOGIC MAX_COUNT</varname>
				<range>1,255</range>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Load Pin</label>
				<varname>LOGIC SYNC_LOAD</varname>
			</param>
		</param_dlg_data>


<!-- #		L -->
		<input> <name>load</name>
		          <point>-1,6</point> 
		</input>

<!-- #		C -->
		<input> <name>count_enable</name>
		          <point>0,6</point> 
		</input>

<!-- #		U -->
		<input> <name>count_up</name>
		          <point>1,6</point> 
		</input>

<!-- #		Cy -->
		<output> <name>carry_out</name>
		          <point>2,6</point> 
		</output>

<!-- #		CLOCK -->
		<input> <name>clock</name>
		          <point>-1,-5</point> 
		</input>

<!-- #		R -->
		<input> <name>clear</name>
		          <point>1,-5</point> 
		</input>

<!-- #		BUS IN -->
		<input> <name>IN_0</name>
		          <point>-4,-3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-4,-2</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-4,-1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-4,0</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-4,1</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-4,2</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-4,3</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-4,4</point> 
		</input>

<!-- #		BUS OUT -->
		<output> <name>OUT_0</name>
		          <point>4,-3</point> 
		</output>
		<output> <name>OUT_1</name>
		          <point>4,-2</point> 
		</output>
		<output> <name>OUT_2</name>
		          <point>4,-1</point> 
		</output>
		<output> <name>OUT_3</name>
		          <point>4,0</point> 
		</output>
		<output> <name>OUT_4</name>
		          <point>4,1</point> 
		</output>
		<output> <name>OUT_5</name>
		          <point>4,2</point> 
		</output>
		<output> <name>OUT_6</name>
		          <point>4,3</point> 
		</output>
		<output> <name>OUT_7</name>
		          <point>4,4</point> 
		</output>

		<shape>
<!-- # Box: -->
			<line>-3,5,3,5</line>
			<line>3,5,3,-4</line>
			<line>3,-4,-3,-4</line>
			<line>-3,-4,-3,5</line>

			<line>-1,5,-1,6</line>
			<line>0,5,0,6</line>
			<line>1,5,1,6</line>
			<line>2,5,2,6</line>

			<line>-1,-4,-1,-5</line>			
			<line>1,-4,1,-5</line>

<!-- # Input Bus: -->
			<offset> <point>-3,4</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>
			<offset> <point>-3,0</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>

<!-- # Output Bus: -->
			<offset> <point>4,4</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>
			<offset> <point>4,0</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>

<!-- #			CLOCK -->
			<line>-0.5,-4,-1,-3</line>
			<line>-1.5,-4,-1,-3</line>

<!-- #			R -->
			<offset><point>0.8,-2.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			L -->
			<offset><point>-1.2,4.7</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			C -->
			<offset><point>-0.2,4.7</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			<line>0,0,0.4,0</line>
			</offset>

<!-- #			U -->
			<offset><point>0.8,4.7</point>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			C -->
			<offset><point>1.6,4.7</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			<line>0,0,0.4,0</line>
			</offset>

<!-- #			O -->
			<offset><point>2.1,4.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>-2.7,-2.6</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>2.3,-2.6</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>AI_REGISTER12</name>
		<caption>12-Bit Counting Register</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 12</logic_param>
		<logic_param>MAX_COUNT 4095</logic_param>
		<logic_param>SYNC_CLEAR true</logic_param>
		<logic_param>SYNC_LOAD true</logic_param>
		<gui_type>REGISTER</gui_type>
		<gui_param>VALUE_BOX -2.4,-0.8,2.4,1.8</gui_param>

		<param_dlg_data>
			<param>
				<type>INT</type>
				<label>Maximum Count Value</label>
				<varname>LOGIC MAX_COUNT</varname>
				<range>1,4095</range>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Load Pin</label>
				<varname>LOGIC SYNC_LOAD</varname>
			</param>
		</param_dlg_data>


<!-- #		L -->
		<input> <name>load</name>
		          <point>-1,7.5</point> 
		</input>

<!-- #		C -->
		<input> <name>count_enable</name>
		          <point>0,7.5</point> 
		</input>

<!-- #		U -->
		<input> <name>count_up</name>
		          <point>1,7.5</point> 
		</input>

<!-- #		Cy -->
		<output> <name>carry_out</name>
		          <point>3,7.5</point> 
		</output>

<!-- #		CLOCK -->
		<input> <name>clock</name>
		          <point>-1,-7.5</point> 
		</input>

<!-- #		R -->
		<input> <name>clear</name>
		          <point>1,-7.5</point> 
		</input>

<!-- #		BUS IN -->
		<input> <name>IN_0</name>
		          <point>-5,-5.5</point> 
		</input>

		<input> <name>IN_1</name>
		          <point>-5,-4.5</point> 
		</input>

		<input> <name>IN_2</name>
		          <point>-5,-3.5</point> 
		</input>

		<input> <name>IN_3</name>
		          <point>-5,-2.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-5,-1.5</point> 
		</input>

		<input> <name>IN_5</name>
		          <point>-5,-0.5</point> 
		</input>

		<input> <name>IN_6</name>
		          <point>-5,0.5</point> 
		</input>

		<input> <name>IN_7</name>
		          <point>-5,1.5</point> 
		</input>
		<input> <name>IN_8</name>
		          <point>-5,2.5</point> 
		</input>

		<input> <name>IN_9</name>
		          <point>-5,3.5</point> 
		</input>

		<input> <name>IN_10</name>
		          <point>-5,4.5</point> 
		</input>

		<input> <name>IN_11</name>
		          <point>-5,5.5</point> 
		</input>

<!-- #		BUS OUT -->

		<output> <name>OUT_0</name>
		          <point>5,-5.5</point> 
		</output>

		<output> <name>OUT_1</name>
		          <point>5,-4.5</point> 
		</output>

		<output> <name>OUT_2</name>
		          <point>5,-3.5</point> 
		</output>

		<output> <name>OUT_3</name>
		          <point>5,-2.5</point> 
		</output>

		<output> <name>OUT_4</name>
		          <point>5,-1.5</point> 
		</output>

		<output> <name>OUT_5</name>
		          <point>5,-0.5</point> 
		</output>

		<output> <name>OUT_6</name>
		          <point>5,0.5</point> 
		</output>

		<output> <name>OUT_7</name>
		          <point>5,1.5</point> 
		</output>
		<output> <name>OUT_8</name>
		          <point>5,2.5</point> 
		</output>

		<output> <name>OUT_9</name>
		          <point>5,3.5</point> 
		</output>

		<output> <name>OUT_10</name>
		          <point>5,4.5</point> 
		</output>

		<output> <name>OUT_11</name>
		          <point>5,5.5</point> 
		</output>

		<shape>
			<line>-4,6.5,4,6.5</line>
			<line>4,6.5,4,-6.5</line>
			<line>4,-6.5,-4,-6.5</line>
			<line>-4,-6.5,-4,6.5</line>

<!-- #			Top Inputs -->
			<line>-1,6.5,-1,7.5</line>
			<line>0,6.5,0,7.5</line>
			<line>1,6.5,1,7.5</line>
			<line>3,6.5,3,7.5</line>
			
<!-- #			Bottom Inputs -->
			<line>-1,-6.5,-1,-7.5</line>			
			<line>1,-6.5,1,-7.5</line>

<!-- #			Outputs -->
			<line>4,-5.5,5,-5.5</line>
			<line>4,-4.5,5,-4.5</line>
			<line>4,-3.5,5,-3.5</line>
			<line>4,-2.5,5,-2.5</line>
			<line>4,-1.5,5,-1.5</line>
			<line>4,-0.5,5,-0.5</line>
			<line>4,0.5,5,0.5</line>
			<line>4,1.5,5,1.5</line>
			<line>4,2.5,5,2.5</line>
			<line>4,3.5,5,3.5</line>
			<line>4,4.5,5,4.5</line>
			<line>4,5.5,5,5.5</line>

<!-- #			Inputs -->
			<offset><point>-9,0</point>
			<line>4,-5.5,5,-5.5</line>
			<line>4,-4.5,5,-4.5</line>
			<line>4,-3.5,5,-3.5</line>
			<line>4,-2.5,5,-2.5</line>
			<line>4,-1.5,5,-1.5</line>
			<line>4,-0.5,5,-0.5</line>
			<line>4,0.5,5,0.5</line>
			<line>4,1.5,5,1.5</line>
			<line>4,2.5,5,2.5</line>
			<line>4,3.5,5,3.5</line>
			<line>4,4.5,5,4.5</line>
			<line>4,5.5,5,5.5</line>
			</offset>


<!-- #			CLOCK -->
			<line>-0.5,-6.5,-1,-5.5</line>
			<line>-1.5,-6.5,-1,-5.5</line>

<!-- #			R -->
			<offset><point>0.8,-5.4</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			L -->
			<offset><point>-1.2,6.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			C -->
			<offset><point>-0.2,6.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			<line>0,0,0.4,0</line>
			</offset>

<!-- #			U -->
			<offset><point>0.8,6.2</point>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			C -->
			<offset><point>2.6,6.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			<line>0,0,0.4,0</line>
			</offset>

<!-- #			O -->
			<offset><point>3.1,6.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>-3.7,-5.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>3.3,-5.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>AM_REGISTER16</name>
		<caption>16-Bit Counting Register</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 16</logic_param>
		<logic_param>MAX_COUNT 65536</logic_param>
		<logic_param>SYNC_CLEAR true</logic_param>
		<logic_param>SYNC_LOAD true</logic_param>
		<gui_type>REGISTER</gui_type>
		<gui_param>VALUE_BOX -2.8,-0.8,2.8,1.8</gui_param>

		<param_dlg_data>
			<param>
				<type>INT</type>
				<label>Maximum Count Value</label>
				<varname>LOGIC MAX_COUNT</varname>
				<range>1,65536</range>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Load Pin</label>
				<varname>LOGIC SYNC_LOAD</varname>
			</param>
		</param_dlg_data>


<!-- #		L -->
		<input> <name>load</name>
		          <point>-1,9.5</point> 
		</input>

<!-- #		C -->
		<input> <name>count_enable</name>
		          <point>0,9.5</point> 
		</input>

<!-- #		U -->
		<input> <name>count_up</name>
		          <point>1,9.5</point> 
		</input>

<!-- #		Cy -->
		<output> <name>carry_out</name>
		          <point>3,9.5</point> 
		</output>

<!-- #		CLOCK -->
		<input> <name>clock</name>
		          <point>-1,-9.5</point> 
		</input>

<!-- #		R -->
		<input> <name>clear</name>
		          <point>1,-9.5</point> 
		</input>

<!-- #		BUS IN -->
		<input> <name>IN_0</name>
		          <point>-5,-7.5</point> 
		</input>

		<input> <name>IN_1</name>
		          <point>-5,-6.5</point> 
		</input>

		<input> <name>IN_2</name>
		          <point>-5,-5.5</point> 
		</input>

		<input> <name>IN_3</name>
		          <point>-5,-4.5</point> 
		</input>

		<input> <name>IN_4</name>
		          <point>-5,-3.5</point> 
		</input>

		<input> <name>IN_5</name>
		          <point>-5,-2.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-5,-1.5</point> 
		</input>

		<input> <name>IN_7</name>
		          <point>-5,-0.5</point> 
		</input>

		<input> <name>IN_8</name>
		          <point>-5,0.5</point> 
		</input>

		<input> <name>IN_9</name>
		          <point>-5,1.5</point> 
		</input>
		<input> <name>IN_10</name>
		          <point>-5,2.5</point> 
		</input>

		<input> <name>IN_11</name>
		          <point>-5,3.5</point> 
		</input>

		<input> <name>IN_12</name>
		          <point>-5,4.5</point> 
		</input>

		<input> <name>IN_13</name>
		          <point>-5,5.5</point> 
		</input>
		<input> <name>IN_14</name>
		          <point>-5,6.5</point> 
		</input>

		<input> <name>IN_15</name>
		          <point>-5,7.5</point> 
		</input>

<!-- #		BUS OUT -->
		<output> <name>OUT_0</name>
		          <point>5,-7.5</point> 
		</output>

		<output> <name>OUT_1</name>
		          <point>5,-6.5</point> 
		</output>

		<output> <name>OUT_2</name>
		          <point>5,-5.5</point> 
		</output>

		<output> <name>OUT_3</name>
		          <point>5,-4.5</point> 
		</output>

		<output> <name>OUT_4</name>
		          <point>5,-3.5</point> 
		</output>

		<output> <name>OUT_5</name>
		          <point>5,-2.5</point> 
		</output>

		<output> <name>OUT_6</name>
		          <point>5,-1.5</point> 
		</output>

		<output> <name>OUT_7</name>
		          <point>5,-0.5</point> 
		</output>

		<output> <name>OUT_8</name>
		          <point>5,0.5</point> 
		</output>

		<output> <name>OUT_9</name>
		          <point>5,1.5</point> 
		</output>

		<output> <name>OUT_10</name>
		          <point>5,2.5</point> 
		</output>

		<output> <name>OUT_11</name>
		          <point>5,3.5</point> 
		</output>

		<output> <name>OUT_12</name>
		          <point>5,4.5</point> 
		</output>

		<output> <name>OUT_13</name>
		          <point>5,5.5</point> 
		</output>

		<output> <name>OUT_14</name>
		          <point>5,6.5</point> 
		</output>

		<output> <name>OUT_15</name>
		          <point>5,7.5</point> 
		</output>

		<shape>
			<line>-4,8.5,4,8.5</line>
			<line>4,8.5,4,-8.5</line>
			<line>4,-8.5,-4,-8.5</line>
			<line>-4,-8.5,-4,8.5</line>

<!-- #			Top Inputs -->
			<line>-1,8.5,-1,9.5</line>
			<line>0,8.5,0,9.5</line>
			<line>1,8.5,1,9.5</line>
			<line>3,8.5,3,9.5</line>
			
<!-- #			Bottom Inputs -->
			<line>-1,-8.5,-1,-9.5</line>			
			<line>1,-8.5,1,-9.5</line>

<!-- #			Outputs -->
			<line>4,-7.5,5,-7.5</line>
			<line>4,-6.5,5,-6.5</line>
			<line>4,-5.5,5,-5.5</line>
			<line>4,-4.5,5,-4.5</line>
			<line>4,-3.5,5,-3.5</line>
			<line>4,-2.5,5,-2.5</line>
			<line>4,-1.5,5,-1.5</line>
			<line>4,-0.5,5,-0.5</line>
			<line>4,0.5,5,0.5</line>
			<line>4,1.5,5,1.5</line>
			<line>4,2.5,5,2.5</line>
			<line>4,3.5,5,3.5</line>
			<line>4,4.5,5,4.5</line>
			<line>4,5.5,5,5.5</line>
			<line>4,6.5,5,6.5</line>
			<line>4,7.5,5,7.5</line>

<!-- #			Inputs -->
			<offset><point>-9,0</point>
			<line>4,-7.5,5,-7.5</line>
			<line>4,-6.5,5,-6.5</line>
			<line>4,-5.5,5,-5.5</line>
			<line>4,-4.5,5,-4.5</line>
			<line>4,-3.5,5,-3.5</line>
			<line>4,-2.5,5,-2.5</line>
			<line>4,-1.5,5,-1.5</line>
			<line>4,-0.5,5,-0.5</line>
			<line>4,0.5,5,0.5</line>
			<line>4,1.5,5,1.5</line>
			<line>4,2.5,5,2.5</line>
			<line>4,3.5,5,3.5</line>
			<line>4,4.5,5,4.5</line>
			<line>4,5.5,5,5.5</line>
			<line>4,6.5,5,6.5</line>
			<line>4,7.5,5,7.5</line>
			</offset>

<!-- #			CLOCK -->
			<line>-0.5,-8.5,-1,-7.5</line>
			<line>-1.5,-8.5,-1,-7.5</line>

<!-- #			R -->
			<offset><point>0.8,-7.4</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			L -->
			<offset><point>-1.2,8.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			C -->
			<offset><point>-0.2,8.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			<line>0,0,0.4,0</line>
			</offset>

<!-- #			U -->
			<offset><point>0.8,8.2</point>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			C -->
			<offset><point>2.6,8.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			<line>0,0,0.4,0</line>
			</offset>

<!-- #			O -->
			<offset><point>3.1,8.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>3.3,-7.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>-3.6,-7.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>BA_SHIFT_REGISTER_4</name>
		<caption>4-Bit Shift Register</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<logic_param>MAX_COUNT 15</logic_param>
		<logic_param>SYNC_CLEAR true</logic_param>
		<logic_param>SYNC_LOAD true</logic_param>
		<gui_type>REGISTER</gui_type>
		<gui_param>VALUE_BOX -0.8,-1.3,0.8,1.3</gui_param>

		<param_dlg_data>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Load Pin</label>
				<varname>LOGIC SYNC_LOAD</varname>
			</param>
		</param_dlg_data>

<!-- #		R -->
		<input> <name>clear</name>
		          <point>-5,0</point> 
		</input>

<!-- #		S -->
		<input> <name>shift_enable</name>
		          <point>5,0</point> 
		</input>

<!-- #		L -->
		<input> <name>load</name>
		          <point>5,-1</point> 
		</input>

<!-- #		Arrow -->
		<input> <name>shift_left</name>
		          <point>5,-2</point> 
		</input>

<!-- #		CLOCK -->
		<input> <name>clock</name>
		          <point>-5,-1</point> 
		</input>

<!-- #		SI -->
		<input> <name>carry_in</name>
		          <point>5,1.5</point> 
		</input>

<!-- #		SO -->
		<output> <name>carry_out</name>
		          <point>-5,1.5</point> 
		</output>

<!-- #		BUS IN -->
		<input> <name>IN_0</name>
		          <point>1.5,3.5</point> 
		</input>

		<input> <name>IN_1</name>
		          <point>0.5,3.5</point> 
		</input>

		<input> <name>IN_2</name>
		          <point>-0.5,3.5</point> 
		</input>

		<input> <name>IN_3</name>
		          <point>-1.5,3.5</point> 
		</input>

<!-- #		BUS OUT -->
		<output> <name>OUT_0</name>
		          <point>1.5,-3.5</point> 
		</output>

		<output> <name>OUT_1</name>
		          <point>0.5,-3.5</point> 
		</output>

		<output> <name>OUT_2</name>
		          <point>-0.5,-3.5</point> 
		</output>

		<output> <name>OUT_3</name>
		          <point>-1.5,-3.5</point> 
		</output>

		<shape>
			<line>-4,2.5,4,2.5</line>
			<line>4,2.5,4,-2.5</line>
			<line>4,-2.5,-4,-2.5</line>
			<line>-4,-2.5,-4,2.5</line>

<!-- #			SR IN -->
			<line>-1.5,2.5,-1.5,3.5</line>
			<line>-0.5,2.5,-0.5,3.5</line>
			<line>0.5,2.5,0.5,3.5</line>
			<line>1.5,2.5,1.5,3.5</line>

<!-- #			SR OUT -->
			<line>-1.5,-2.5,-1.5,-3.5</line>
			<line>-0.5,-2.5,-0.5,-3.5</line>
			<line>0.5,-2.5,0.5,-3.5</line>
			<line>1.5,-2.5,1.5,-3.5</line>		

<!-- #			Carry In &amp; Carry Out -->
			<line>4,1.5,5,1.5</line>
			<line>-4,1.5,-5,1.5</line>

<!-- #			CLOCK -->
			<line>-4,-0.5,-3,-1</line>
			<line>-4,-1.5,-3,-1</line>

<!-- #			Right Inputs -->
			<line>5,0,4,0</line>
			<line>5,-1,4,-1</line>
			<line>5,-2,4,-2</line>

<!-- #			Left Inputs -->
			<line>-4,0,-5,0</line>
			<line>-4,-1,-5,-1</line>
			
<!-- #			0 -->
			<offset><point>1.3,-1.4</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>-1.7,2.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>1.3,2.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>-1.7,-1.4</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			R -->
			<offset><point>-3.7,0.4</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			S -->
			<offset><point>3.3,0.4</point>
			<line>0.4,0,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0,-0.2</line>
			<line>0,-0.2,0.4,-0.6</line>
			<line>0.4,-0.7,0.4,-0.6</line>
			<line>0.4,-0.7,0.3,-0.8</line>
			<line>0.3,-0.8,0,-0.8</line>
			</offset>

<!-- #			L -->
			<offset><point>3.3,-0.6</point>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>


<!-- #			Arrow -->
			<offset><point>3.3,-2</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0.2,-0.2</line>
			<line>0,0,0.2,0.2</line>
			</offset>

<!-- #			S -->
			<offset><point>-3.7,1.9</point>
			<line>0.4,0,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0,-0.2</line>
			<line>0,-0.2,0.4,-0.6</line>
			<line>0.4,-0.7,0.4,-0.6</line>
			<line>0.4,-0.7,0.3,-0.8</line>
			<line>0.3,-0.8,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-3.2,1.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			S -->
			<offset><point>2.8,1.9</point>
			<line>0.4,0,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0,-0.2</line>
			<line>0,-0.2,0.4,-0.6</line>
			<line>0.4,-0.7,0.4,-0.6</line>
			<line>0.4,-0.7,0.3,-0.8</line>
			<line>0.3,-0.8,0,-0.8</line>
			</offset>

<!-- #			I -->
			<offset><point>3.3,1.9</point>
			<line>0.2,0,0.2,-0.8</line>
			<line>0,0,0.4,0</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

		</shape>
	</gate>
<!-- #	<gate> <name>BA_SHIFT_REGISTER_8</name> -->
<!-- #NOTE: Need to make the 8-bit shift register shape. -->
<!-- #		<caption>8-Bit Shift Register (TODO)</caption> -->
<!-- #	</gate> -->
<!-- #	<gate> <name>BI_SHIFT_REGISTER_12</name> -->
<!-- #NOTE: Need to make the 12-bit shift register shape. -->
<!-- #		<caption>12-Bit Shift Register (TODO)</caption> -->
<!-- #	</gate> -->
<!-- #	<gate> <name>BM_SHIFT_REGISTER_16</name> -->
<!-- #NOTE: Need to make the 16-bit shift register shape. -->
<!-- #		<caption>16-Bit Shift Register (TODO)</caption> -->
<!-- #	</gate> -->
</library>
<library> <name>5 - MUX and Decoder</name>
	<gate> <name>AA_MUX_2x1</name>
		<caption>2x1 Mux</caption>
		<logic_type>MUX</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
		<input> <name>IN_1</name>
		          <point>-2,1</point> 
		</input>
		<input> <name>IN_0</name>
		          <point>-2,-1</point> 
		</input>

		<input> <name>SEL_0</name>
		          <point>0,2.5</point> 
		</input>

		<output> <name>OUT</name>
		          <point>2,0</point> 
		</output>

		<shape>
			<line>-2,1,-1,1</line>
			<line>-2,-1,-1,-1</line>

			<line>-1,2,1,1</line>
			<line>-1,2,-1,-2</line>
			<line>-1,-2,1,-1</line>
			<line>1,1,1,-1</line>

			<line>1,0,2,0</line>

			<line>0,1.5,0,2.5</line>

<!-- #			0 -->
			<offset><point>-0.7,-0.6</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>


		</shape>
	</gate>
	<gate> <name>AE_MUX_4x1</name>
		<caption>4x1 Mux</caption>
		<logic_type>MUX</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,-3</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,-1</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,1</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,3</point> 
		</input>
		<input> <name>SEL_1</name>
		          <point>0,5</point> 
		</input>
		<input> <name>SEL_0</name>
		          <point>1,5</point> 
		</input>
		<output> <name>OUT</name>
		          <point>3,0</point> 
		</output>
		<shape>
			<line>-3,3,-2,3</line>
			<line>-3,1,-2,1</line>
			<line>-3,-1,-2,-1</line>
			<line>-3,-3,-2,-3</line>
			<line>-2,4,2,3</line>
			<line>-2,4,-2,-4</line>
			<line>-2,-4,2,-3</line>
			<line>2,3,2,-3</line>
			<line>2,0,3,0</line>
			<line>0,3.5,0,5</line>
			<line>1,3.25,1,5</line>

<!-- #			0 -->
			<offset><point>-1.7,-2.6</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>AI_MUX_8x1</name>
		<caption>8x1 Mux</caption>
		<logic_type>MUX</logic_type>
		<logic_param>INPUT_BITS 8</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,-3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,-2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,-0.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-3,0.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-3,1.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-3,2.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-3,3.5</point> 
		</input>

		<input> <name>SEL_2</name>
		          <point>-1,5.5</point> 
		</input>
		<input> <name>SEL_1</name>
		          <point>0,5.5</point> 
		</input>
		<input> <name>SEL_0</name>
		          <point>1,5.5</point> 
		</input>

		<output> <name>OUT</name>
		          <point>3,0</point> 
		</output>

		<shape>
			<offset> <point>-2,3.5</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>
			<offset> <point>-2,-0.5</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>

			<line>-2,4.5,2,3.5</line>
			<line>-2,4.5,-2,-4.5</line>
			<line>-2,-4.5,2,-3.5</line>
			<line>2,3.5,2,-3.5</line>

			<line>2,0,3,0</line>

			<line>-1,4.25,-1,5.5</line>
			<line>0,4.0,0,5.5</line>
			<line>1,3.75,1,5.5</line>

<!-- #			0 -->
			<offset><point>-1.7,-3.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>AM_MUX_16x1</name>
		<caption>16x1 Mux</caption>
		<logic_type>MUX</logic_type>
		<logic_param>INPUT_BITS 16</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,-7.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,-6.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,-5.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,-4.5</point> 
		</input>
		<input> <name>IN_4</name>
		          <point>-3,-3.5</point> 
		</input>
		<input> <name>IN_5</name>
		          <point>-3,-2.5</point> 
		</input>
		<input> <name>IN_6</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>IN_7</name>
		          <point>-3,-0.5</point> 
		</input>

		<input> <name>IN_8</name>
		          <point>-3,0.5</point> 
		</input>
		<input> <name>IN_9</name>
		          <point>-3,1.5</point> 
		</input>
		<input> <name>IN_10</name>
		          <point>-3,2.5</point> 
		</input>
		<input> <name>IN_11</name>
		          <point>-3,3.5</point> 
		</input>
		<input> <name>IN_12</name>
		          <point>-3,4.5</point> 
		</input>
		<input> <name>IN_13</name>
		          <point>-3,5.5</point> 
		</input>
		<input> <name>IN_14</name>
		          <point>-3,6.5</point> 
		</input>
		<input> <name>IN_15</name>
		          <point>-3,7.5</point> 
		</input>
		<input> <name>SEL_3</name>
		          <point>-1.5,9.5</point> 
		</input>
		<input> <name>SEL_2</name>
		          <point>-0.5,9.5</point> 
		</input>
		<input> <name>SEL_1</name>
		          <point>0.5,9.5</point> 
		</input>
		<input> <name>SEL_0</name>
		          <point>1.5,9.5</point> 
		</input>

		<output> <name>OUT</name>
		          <point>3,0</point> 
		</output>

		<shape>
			<offset> <point>-2,7.5</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>
			<offset> <point>-2,3.5</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>
			<offset> <point>-2,-0.5</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>
			<offset> <point>-2,-4.5</point>
			<line>-1,0,0,0</line>
			<line>-1,-1,0,-1</line>
			<line>-1,-2,0,-2</line>			
			<line>-1,-3,0,-3</line>
			</offset>

			<line>-2,8.5,2,7.5</line>
			<line>-2,8.5,-2,-8.5</line>
			<line>-2,-8.5,2,-7.5</line>
			<line>2,7.5,2,-7.5</line>

			<line>2,0,3,0</line>
		
			<line>-1.5,8.4,-1.5,9.5</line>	
			<line>-0.5,8.13,-0.5,9.5</line>
			<line>0.5,7.9,0.5,9.5</line>
			<line>1.5,7.6,1.5,9.5</line>

<!-- #			0 -->
			<offset><point>-1.7,-7.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>BA_DECODER_2x4</name>
		<caption>2x4 Decoder</caption>
		<logic_type>DECODER</logic_type>
		<logic_param>INPUT_BITS 2</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,-0.5</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>-3,1.5</point> 
		</input>
		<output> <name>OUT_0</name>
		          <point>3,-1.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_1</name>
		          <point>3,-0.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_2</name>
		          <point>3,0.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_3</name>
		          <point>3,1.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<shape>
			<line>-2,2.5,2,2.5</line>
			<line>2,2.5,2,-2.5</line>
			<line>2,-2.5,-2,-2.5</line>
			<line>-2,-2.5,-2,2.5</line>

<!-- #		      Lines for offset in other decoders -->
			<line>2,1.5,3,1.5</line>
			<line>2,0.5,3,0.5</line>
			<line>2,-0.5,3,-0.5</line>
			<line>2,-1.5,3,-1.5</line>

<!-- #			Decoder Input Lines -->
			<line>-2,-1.5,-3,-1.5</line>
			<line>-2,-0.5,-3,-0.5</line>

<!-- #			Enable -->
			<line>-2,1.5,-3,1.5</line>
			
<!-- #			E -->
			<offset><point>-1.7,1.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>-1.7,-1.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>1.3,-1.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>1.3,1.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>BE_DECODER_3x8</name>
		<caption>3x8 Decoder</caption>
		<logic_type>DECODER</logic_type>
		<logic_param>INPUT_BITS 3</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,-3.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,-2.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,-1.5</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>-3,3.5</point> 
		</input>
		<output> <name>OUT_0</name>
		          <point>3,-3.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_1</name>
		          <point>3,-2.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_2</name>
		          <point>3,-1.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_3</name>
		          <point>3,-0.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_4</name>
		          <point>3,0.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_5</name>
		          <point>3,1.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_6</name>
		          <point>3,2.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_7</name>
		          <point>3,3.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<shape>
			<line>-2,4.5,2,4.5</line>
			<line>2,4.5,2,-4.5</line>
			<line>2,-4.5,-2,-4.5</line>
			<line>-2,-4.5,-2,4.5</line>
			<line>-2,3.5,-3,3.5</line>
			<line>-2,-1.5,-3,-1.5</line>
			<line>-2,-2.5,-3,-2.5</line>
			<line>-2,-3.5,-3,-3.5</line>
			<line>2,-3.5,3,-3.5</line>
			<line>2,-2.5,3,-2.5</line>
			<line>2,-1.5,3,-1.5</line>
			<line>2,-0.5,3,-0.5</line>
			<line>2,0.5,3,0.5</line>
			<line>2,1.5,3,1.5</line>
			<line>2,2.5,3,2.5</line>
			<line>2,3.5,3,3.5</line>
			<line>2,3.5,3,3.5</line>

<!-- #			E -->
			<offset><point>-1.7,3.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			2 -->
			<offset><point>-1.7,-1.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>-1.7,-3.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>1.3,-3.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			7 -->
			<offset><point>1.3,3.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>BI_DECODER_4x16</name>
		<caption>4x16 Decoder</caption>
		<logic_type>DECODER</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>
		<input> <name>IN_0</name>
		          <point>-3,-7.5</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,-6.5</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-3,-5.5</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-3,-4.5</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>-3,7.5</point> 
		</input>
		<output> <name>OUT_0</name>
		          <point>3,-7.5</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_1</name>
		          <point>3,-6.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_2</name>
		          <point>3,-5.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_3</name>
		          <point>3,-4.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_4</name>
		          <point>3,-3.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_5</name>
		          <point>3,-2.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_6</name>
		          <point>3,-1.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_7</name>
		          <point>3,-0.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_8</name>
		          <point>3,0.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_9</name>
		          <point>3,1.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_10</name>
		          <point>3,2.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_11</name>
		          <point>3,3.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_12</name>
		          <point>3,4.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_13</name>
		          <point>3,5.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_14</name>
		          <point>3,6.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>OUT_15</name>
		          <point>3,7.5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<shape>
			<line>2,8.5,2,-8.5</line>
			<line>2,-8.5,-2,-8.5</line>
			<line>-2,-8.5,-2,8.5</line>
			<line>-2,8.5,2,8.5</line>

<!-- #		      Lines for offset in other decoders -->
			<line>2,1.5,3,1.5</line>
			<line>2,0.5,3,0.5</line>
			<line>2,-0.5,3,-0.5</line>
			<line>2,-1.5,3,-1.5</line>

		      <offset><point>0,4</point>
			<line>2,1.5,3,1.5</line>
			<line>2,0.5,3,0.5</line>
			<line>2,-0.5,3,-0.5</line>
			<line>2,-1.5,3,-1.5</line>
			</offset>

		      <offset><point>0,-4</point>
			<line>2,1.5,3,1.5</line>
			<line>2,0.5,3,0.5</line>
			<line>2,-0.5,3,-0.5</line>
			<line>2,-1.5,3,-1.5</line>
			</offset>

<!-- #			Top Half -->
			<line>2,7.5,3,7.5</line>
			<line>2,6.5,3,6.5</line>

<!-- #			Bottom Half -->
			<line>2,-6.5,3,-6.5</line>
			<line>2,-7.5,3,-7.5</line>

<!-- #			Select Line Pins -->
		      <offset><point>-5,-6</point>
			<line>2,1.5,3,1.5</line>
			<line>2,0.5,3,0.5</line>
			<line>2,-0.5,3,-0.5</line>
			<line>2,-1.5,3,-1.5</line>
			</offset>

<!-- #			Enable	 -->
			<line>-2,7.5,-3,7.5</line>	

<!-- #			E -->
			<offset><point>-1.7,7.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			3 -->
			<offset><point>-1.7,-4.1</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-1.7,-7.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>1.3,-7.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>1.1,7.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>1.3,7.9</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>
		</shape>
	</gate>
</library>
<library> <name>7 - Flip Flops</name>
	<gate> <name>AA_DFF</name>
		<caption>D Flip Flop - High Active Set/Reset</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 1</logic_param>
		<logic_param>NO_HOLD true</logic_param>
		<logic_param>SYNC_LOAD true</logic_param>
		<logic_param>SYNC_SET false</logic_param>
		<logic_param>SYNC_CLEAR false</logic_param>
		<param_dlg_data>
			<param>
				<type>BOOL</type>
				<label>Synchronous Set Pin</label>
				<varname>LOGIC SYNC_SET</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
		</param_dlg_data>

<!-- #		D -->
		<input> <name>IN_0</name>
		          <point>-3,2</point> 
		</input>

<!-- #		Clock -->
		<input> <name>clock</name>
		          <point>-3,-1</point> 
		</input>

<!-- #		SET -->
		<input> <name>set</name>
		          <point>0,4</point> 
		</input>

<!-- #		RESET -->
		<input> <name>clear</name>
		          <point>0,-4</point> 
		</input>
<!-- #		Q -->
		<output> <name>OUT_0</name>
		          <point>3,2</point> 
		</output>

<!-- #		QNOT -->
		<output> <name>OUTINV_0</name>
		          <point>3,-1</point> 
		</output>


		<shape>
			<line>2,3,-2,3</line>
			<line>-2,3,-2,-3</line>
			<line>-2,-3,2,-3</line>
			<line>2,-3,2,3</line>
			<line>-2,2,-3,2</line>

<!-- #			CLOCK -->
			<line>-2,-0.5,-1,-1</line>
			<line>-2,-1.5,-1,-1</line>

			<line>-2,-1,-3,-1</line>
			<line>2,-1,3,-1</line>
			<line>2,2,3,2</line>
			<line>0,3,0,4</line>
			<line>0,-3,0,-4</line>

<!-- #			D -->
			<offset><point>-1.7,2.4</point>
			<line>0,0,0.4,-0.1</line>
			<line>0.4,-0.1,0.4,-0.7</line>
			<line>0.4,-0.7,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			Q -->
			<offset><point>1.3,2.4</point>
			<line>0.1,0,0,-0.1</line>
			<line>0,-0.1,0,-0.7</line>
			<line>0,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0.3,-0.8</line>
			<line>0.3,-0.8,0.4,-0.7</line>
			<line>0.4,-0.7,0.4,-0.1</line>
			<line>0.4,-0.1,0.3,0</line>
			<line>0.3,0,0.1,0</line>
			<line>0.4,-0.8,0.2,-0.6</line>
			</offset>

<!-- #			Q NOT -->
			<offset><point>1.3,-0.6</point>
			<line>0,0.1,0.4,0.1</line>
			<line>0.1,0,0,-0.1</line>
			<line>0,-0.1,0,-0.7</line>
			<line>0,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0.3,-0.8</line>
			<line>0.3,-0.8,0.4,-0.7</line>
			<line>0.4,-0.7,0.4,-0.1</line>
			<line>0.4,-0.1,0.3,0</line>
			<line>0.3,0,0.1,0</line>
			<line>0.4,-0.8,0.2,-0.6</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>AE_DFF_LOW</name>
		<caption>D Flip Flop - Low Active Set/Reset</caption>
		<logic_type>REGISTER</logic_type>
		<logic_param>INPUT_BITS 1</logic_param>
		<logic_param>NO_HOLD true</logic_param>
		<logic_param>SYNC_LOAD true</logic_param>
		<logic_param>SYNC_SET false</logic_param>
		<logic_param>SYNC_CLEAR false</logic_param>
		<param_dlg_data>
			<param>
				<type>BOOL</type>
				<label>Synchronous Set Pin</label>
				<varname>LOGIC SYNC_SET</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
		</param_dlg_data>

<!-- #		D -->
		<input> <name>IN_0</name>
		          <point>-3,2</point> 
		</input>

<!-- #		Clock -->
		<input> <name>clock</name>
		          <point>-3,-1</point> 
		</input>

<!-- #		SET -->
		<input> <name>set</name>
		          <point>0,4</point> 
			<inverted>true</inverted>
		</input>

<!-- #		RESET -->
		<input> <name>clear</name>
		          <point>0,-4</point> 
			<inverted>true</inverted>
		</input>
<!-- #		Q -->
		<output> <name>OUT_0</name>
		          <point>3,2</point> 
		</output>

<!-- #		QNOT -->
		<output> <name>OUTINV_0</name>
		          <point>3,-1</point> 
		</output>


		<shape>
			<line>2,3,-2,3</line>
			<line>-2,3,-2,-3</line>
			<line>-2,-3,2,-3</line>
			<line>2,-3,2,3</line>
			<line>-2,2,-3,2</line>

<!-- #			CLOCK -->
			<line>-2,-0.5,-1,-1</line>
			<line>-2,-1.5,-1,-1</line>

			<line>-2,-1,-3,-1</line>
			<line>2,-1,3,-1</line>
			<line>2,2,3,2</line>
			<line>0,3.7,0,4</line>
			<line>0,-3.7,0,-4</line>

<!-- #			D -->
			<offset><point>-1.7,2.4</point>
			<line>0,0,0.4,-0.1</line>
			<line>0.4,-0.1,0.4,-0.7</line>
			<line>0.4,-0.7,0,-0.8</line>
			<line>0,-0.8,0,0</line>
			</offset>

<!-- #			Q -->
			<offset><point>1.3,2.4</point>
			<line>0.1,0,0,-0.1</line>
			<line>0,-0.1,0,-0.7</line>
			<line>0,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0.3,-0.8</line>
			<line>0.3,-0.8,0.4,-0.7</line>
			<line>0.4,-0.7,0.4,-0.1</line>
			<line>0.4,-0.1,0.3,0</line>
			<line>0.3,0,0.1,0</line>
			<line>0.4,-0.8,0.2,-0.6</line>
			</offset>

<!-- #			Q NOT -->
			<offset><point>1.3,-0.6</point>
			<line>0,0.1,0.4,0.1</line>
			<line>0.1,0,0,-0.1</line>
			<line>0,-0.1,0,-0.7</line>
			<line>0,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0.3,-0.8</line>
			<line>0.3,-0.8,0.4,-0.7</line>
			<line>0.4,-0.7,0.4,-0.1</line>
			<line>0.4,-0.1,0.3,0</line>
			<line>0.3,0,0.1,0</line>
			<line>0.4,-0.8,0.2,-0.6</line>
			</offset>

<!-- #			Low Active Portion -->
			<circle>0,3.35,0.35,24</circle>
			<circle>0,-3.35,0.35,24</circle>

		</shape>
	</gate>
	<gate> <name>BA_JKFF</name>
		<caption>JK Flip Flop - High Active Set/Reset</caption>
		<logic_type>JKFF</logic_type>
		<logic_param>SYNC_SET false</logic_param>
		<logic_param>SYNC_CLEAR false</logic_param>
		<param_dlg_data>
			<param>
				<type>BOOL</type>
				<label>Synchronous Set Pin</label>
				<varname>LOGIC SYNC_SET</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
		</param_dlg_data>


<!-- #		J -->
		<input> <name>J</name>
		          <point>-3,2</point> 
		</input>

<!-- #		K -->
		<input> <name>K</name>
		          <point>-3,-2</point> 
		</input>


<!-- #		Clock -->
		<input> <name>clock</name>
		          <point>-3,0</point> 
		</input>

<!-- #		SET -->
		<input> <name>set</name>
		          <point>0,4</point> 
		</input>

<!-- #		RESET -->
		<input> <name>clear</name>
		          <point>0,-4</point> 
		</input>

<!-- #		Q -->
		<output> <name>Q</name>
		          <point>3,2</point> 
		</output>

<!-- #		QNOT -->
		<output> <name>nQ</name>
		          <point>3,-2</point> 
		</output>


		<shape>
			<line>2,3,-2,3</line>
			<line>-2,3,-2,-3</line>
			<line>-2,-3,2,-3</line>
			<line>2,-3,2,3</line>
			<line>-2,2,-3,2</line>

<!-- #			CLOCK -->
			<line>-2,0.5,-1,0</line>
			<line>-2,-0.5,-1,0</line>

			<line>-2,0,-3,0</line>
			<line>-2,-2,-3,-2</line>
			<line>2,-2,3,-2</line>
			<line>2,2,3,2</line>
			<line>0,3,0,4</line>
			<line>0,-3,0,-4</line>

<!-- #			J -->
			<offset><point>-1.7,2.4</point>
			<line>0,0,0.4,0</line>
			<line>0.2,0,0.2,-0.7</line>
			<line>0.2,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0,-0.7</line>
			</offset>

<!-- #			K -->
			<offset><point>-1.7,-1.6</point>
			<line>0,0,0,-0.8</line>
			<line>0.4,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			Q -->
			<offset><point>1.3,2.4</point>
			<line>0.1,0,0,-0.1</line>
			<line>0,-0.1,0,-0.7</line>
			<line>0,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0.3,-0.8</line>
			<line>0.3,-0.8,0.4,-0.7</line>
			<line>0.4,-0.7,0.4,-0.1</line>
			<line>0.4,-0.1,0.3,0</line>
			<line>0.3,0,0.1,0</line>
			<line>0.4,-0.8,0.2,-0.6</line>
			</offset>

<!-- #			Q NOT -->
			<offset><point>1.3,-1.6</point>
			<line>0,0.1,0.4,0.1</line>
			<line>0.1,0,0,-0.1</line>
			<line>0,-0.1,0,-0.7</line>
			<line>0,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0.3,-0.8</line>
			<line>0.3,-0.8,0.4,-0.7</line>
			<line>0.4,-0.7,0.4,-0.1</line>
			<line>0.4,-0.1,0.3,0</line>
			<line>0.3,0,0.1,0</line>
			<line>0.4,-0.8,0.2,-0.6</line>
			</offset>

		</shape>
	</gate>
	<gate> <name>BE_JKFF_LOW</name>
		<caption>JK Flip Flop - Low Active Set/Reset</caption>
		<logic_type>JKFF</logic_type>
		<logic_param>SYNC_SET false</logic_param>
		<logic_param>SYNC_CLEAR false</logic_param>
		<param_dlg_data>
			<param>
				<type>BOOL</type>
				<label>Synchronous Set Pin</label>
				<varname>LOGIC SYNC_SET</varname>
			</param>
			<param>
				<type>BOOL</type>
				<label>Synchronous Reset Pin</label>
				<varname>LOGIC SYNC_CLEAR</varname>
			</param>
		</param_dlg_data>


<!-- #		J -->
		<input> <name>J</name>
		          <point>-3,2</point> 
		</input>

<!-- #		K -->
		<input> <name>K</name>
		          <point>-3,-2</point> 
		</input>


<!-- #		Clock -->
		<input> <name>clock</name>
		          <point>-3,0</point> 
		</input>

<!-- #		SET -->
		<input> <name>set</name>
		          <point>0,4</point> 
			<inverted>true</inverted>
		</input>

<!-- #		RESET -->
		<input> <name>clear</name>
		          <point>0,-4</point>
			<inverted>true</inverted>
		</input>

<!-- #		Q -->
		<output> <name>Q</name>
		          <point>3,2</point> 
		</output>

<!-- #		QNOT -->
		<output> <name>nQ</name>
		          <point>3,-2</point> 
		</output>

		<shape>
			<line>2,3,-2,3</line>
			<line>-2,3,-2,-3</line>
			<line>-2,-3,2,-3</line>
			<line>2,-3,2,3</line>
			<line>-2,2,-3,2</line>

<!-- #			CLOCK -->
			<line>-2,0.5,-1,0</line>
			<line>-2,-0.5,-1,0</line>

			<line>-2,0,-3,0</line>
			<line>-2,-2,-3,-2</line>
			<line>2,-2,3,-2</line>
			<line>2,2,3,2</line>
			<line>0,3.7,0,4</line>
			<line>0,-3.7,0,-4</line>

<!-- #			J -->
			<offset><point>-1.7,2.4</point>
			<line>0,0,0.4,0</line>
			<line>0.2,0,0.2,-0.7</line>
			<line>0.2,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0,-0.7</line>
			</offset>

<!-- #			K -->
			<offset><point>-1.7,-1.6</point>
			<line>0,0,0,-0.8</line>
			<line>0.4,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			Q -->
			<offset><point>1.3,2.4</point>
			<line>0.1,0,0,-0.1</line>
			<line>0,-0.1,0,-0.7</line>
			<line>0,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0.3,-0.8</line>
			<line>0.3,-0.8,0.4,-0.7</line>
			<line>0.4,-0.7,0.4,-0.1</line>
			<line>0.4,-0.1,0.3,0</line>
			<line>0.3,0,0.1,0</line>
			<line>0.4,-0.8,0.2,-0.6</line>
			</offset>

<!-- #			Q NOT -->
			<offset><point>1.3,-1.6</point>
			<line>0,0.1,0.4,0.1</line>
			<line>0.1,0,0,-0.1</line>
			<line>0,-0.1,0,-0.7</line>
			<line>0,-0.7,0.1,-0.8</line>
			<line>0.1,-0.8,0.3,-0.8</line>
			<line>0.3,-0.8,0.4,-0.7</line>
			<line>0.4,-0.7,0.4,-0.1</line>
			<line>0.4,-0.1,0.3,0</line>
			<line>0.3,0,0.1,0</line>
			<line>0.4,-0.8,0.2,-0.6</line>
			</offset>

<!-- #			Low Active Portion -->
			<circle>0,3.35,0.35,24</circle>
			<circle>0,-3.35,0.35,24</circle>

		</shape>
	</gate>
</library>
<library> <name>9 - RAM and ROM</name>
	<gate> <name>AA_RAM_4x4</name>
		<caption>4x4 RAM</caption>
		<logic_type>RAM</logic_type>
		<logic_param>DATA_BITS 4</logic_param>
		<logic_param>ADDRESS_BITS 4</logic_param>

		<param_dlg_data>
			<param>
				<type>FILE_OUT</type>
				<label>Save filename</label>
				<varname>LOGIC WRITE_FILE</varname>
			</param>
			<param>
				<type>FILE_IN</type>
				<label>Load filename</label>
				<varname>LOGIC READ_FILE</varname>
			</param>
		</param_dlg_data>

<!-- #		Box Inputs -->
		<input> <name>DATA_IN_0</name>
		          <point>1.5,5</point> 
		</input>
		<input> <name>DATA_IN_1</name>
		          <point>0.5,5</point> 
		</input>
		<input> <name>DATA_IN_2</name>
		          <point>-0.5,5</point> 
		</input>
		<input> <name>DATA_IN_3</name>
		          <point>-1.5,5</point> 
		</input>

<!-- #		Address Inputs -->
		<input> <name>ADDRESS_0</name>
		          <point>-5,-1.5</point> 
		</input>
		<input> <name>ADDRESS_1</name>
		          <point>-5,-0.5</point> 
		</input>
		<input> <name>ADDRESS_2</name>
		          <point>-5,0.5</point> 
		</input>
		<input> <name>ADDRESS_3</name>
		          <point>-5,1.5</point> 
		</input>
		
<!-- #		Misc Inputs CL,W,OE -->
		<input> <name>write_clock</name>
		          <point>5,1.5</point> 
		</input>
		<input> <name>write_enable</name>
		          <point>5,0.5</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>5,-0.5</point> 
		</input>

<!-- #		Data Out -->
		<output> <name>DATA_OUT_0</name>
		          <point>1.5,-5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_1</name>
		          <point>0.5,-5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_2</name>
		          <point>-0.5,-5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_3</name>
		          <point>-1.5,-5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		
		<shape>
<!-- #			Box -->
			<line>-4,4,4,4</line>
			<line>4,4,4,-4</line>
			<line>4,-4,-4,-4</line>
			<line>-4,-4,-4,4</line>

<!-- #			Data IN -->
			<line>-1.5,4,-1.5,5</line>
			<line>-0.5,4,-0.5,5</line>
			<line>0.5,4,0.5,5</line>
			<line>1.5,4,1.5,5</line>

<!-- #			Address		 -->
			<line>-5,1.5,-4,1.5</line>
			<line>-5,0.5,-4,0.5</line>
			<line>-5,-0.5,-4,-0.5</line>
			<line>-5,-1.5,-4,-1.5</line>

<!-- #			Data Out -->
			<line>1.5,-4,1.5,-5</line>
			<line>0.5,-4,0.5,-5</line>
			<line>-0.5,-4,-0.5,-5</line>
			<line>-1.5,-4,-1.5,-5</line>

<!-- #			Other Inputs -->
			<line>5,1.5,4,1.5</line>
			<line>5,0.5,4,0.5</line>
			<line>5,-0.5,4,-0.5</line>

<!-- #			CLOCK -->
			<line>4,2,3,1.5</line>
			<line>4,1,3,1.5</line>

<!-- #			W -->
			<offset><point>3.3,0.9</point>
			<line>0,0,0.1,-0.8</line>
			<line>0.1,-0.8,0.2,-0.4</line>
			<line>0.3,-0.8,0.2,-0.4</line>
			<line>0.4,0,0.3,-0.8</line>
			</offset>

<!-- #			E -->
			<offset><point>3.3,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>2.7,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			R -->
			<offset><point>-.6,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			A -->
			<offset><point>0,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			M -->
			<offset><point>.6,0.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.4,0,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>1.3,3.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>-3.7,-1.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>1.3,-2.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>-1.7,3.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			3 -->
			<offset><point>-3.7,1.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			3 -->
			<offset><point>-1.7,-2.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>			
			</offset>
		</shape>
	</gate>
	<gate> <name>AE_RAM_8x8</name>
		<caption>8x8 RAM</caption>
		<logic_type>RAM</logic_type>
		<logic_param>DATA_BITS 8</logic_param>
		<logic_param>ADDRESS_BITS 8</logic_param>

		<param_dlg_data>
			<param>
				<type>FILE_OUT</type>
				<label>Save filename</label>
				<varname>LOGIC WRITE_FILE</varname>
			</param>
			<param>
				<type>FILE_IN</type>
				<label>Load filename</label>
				<varname>LOGIC READ_FILE</varname>
			</param>
		</param_dlg_data>

<!-- #		Box Inputs -->
		<input> <name>DATA_IN_0</name>
		          <point>3.5,7</point> 
		</input>
		<input> <name>DATA_IN_1</name>
		          <point>2.5,7</point> 
		</input>
		<input> <name>DATA_IN_2</name>
		          <point>1.5,7</point> 
		</input>
		<input> <name>DATA_IN_3</name>
		          <point>0.5,7</point> 
		</input>
		<input> <name>DATA_IN_4</name>
		          <point>-0.5,7</point> 
		</input>
		<input> <name>DATA_IN_5</name>
		          <point>-1.5,7</point> 
		</input>
		<input> <name>DATA_IN_6</name>
		          <point>-2.5,7</point> 
		</input>
		<input> <name>DATA_IN_7</name>
		          <point>-3.5,7</point> 
		</input>

<!-- #		Address Inputs -->
		<input> <name>ADDRESS_0</name>
		          <point>-5,-3.5</point> 
		</input>
		<input> <name>ADDRESS_1</name>
		          <point>-5,-2.5</point> 
		</input>
		<input> <name>ADDRESS_2</name>
		          <point>-5,-1.5</point> 
		</input>
		<input> <name>ADDRESS_3</name>
		          <point>-5,-0.5</point> 
		</input>
		<input> <name>ADDRESS_4</name>
		          <point>-5,0.5</point> 
		</input>
		<input> <name>ADDRESS_5</name>
		          <point>-5,1.5</point> 
		</input>
		<input> <name>ADDRESS_6</name>
		          <point>-5,2.5</point> 
		</input>
		<input> <name>ADDRESS_7</name>
		          <point>-5,3.5</point> 
		</input>

<!-- #		Misc Inputs CL,W,OE -->
		<input> <name>write_clock</name>
		          <point>5,1.5</point> 
		</input>
		<input> <name>write_enable</name>
		          <point>5,0.5</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>5,-0.5</point> 
		</input>

<!-- #		Data Out -->
		<output> <name>DATA_OUT_0</name>
		          <point>3.5,-7</point>
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_1</name>
		          <point>2.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_2</name>
		          <point>1.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_3</name>
		          <point>0.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_4</name>
		          <point>-0.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_5</name>
		          <point>-1.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_6</name>
		          <point>-2.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_7</name>
		          <point>-3.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>

		<shape>
<!-- #			Box -->
			<line>-4,6,4,6</line>
			<line>4,6,4,-6</line>
			<line>4,-6,-4,-6</line>
			<line>-4,-6,-4,6</line>

<!-- #			Data IN -->
			<line>-3.5,6,-3.5,7</line>
			<line>-2.5,6,-2.5,7</line>
			<line>-1.5,6,-1.5,7</line>
			<line>-0.5,6,-0.5,7</line>
			<line>0.5,6,0.5,7</line>
			<line>1.5,6,1.5,7</line>
			<line>2.5,6,2.5,7</line>
			<line>3.5,6,3.5,7</line>

<!-- #			Address		 -->
			<line>-4,3.5,-5,3.5</line>
			<line>-4,2.5,-5,2.5</line>
			<line>-4,1.5,-5,1.5</line>
			<line>-4,0.5,-5,0.5</line>
			<line>-4,-0.5,-5,-0.5</line>
			<line>-4,-1.5,-5,-1.5</line>
			<line>-4,-2.5,-5,-2.5</line>
			<line>-4,-3.5,-5,-3.5</line>

<!-- #			Data Out -->
			<line>-3.5,-6,-3.5,-7</line>
			<line>-2.5,-6,-2.5,-7</line>
			<line>-1.5,-6,-1.5,-7</line>
			<line>-0.5,-6,-0.5,-7</line>
			<line>0.5,-6,0.5,-7</line>
			<line>1.5,-6,1.5,-7</line>
			<line>2.5,-6,2.5,-7</line>
			<line>3.5,-6,3.5,-7</line>

<!-- #			Other Inputs -->
			<line>5,1.5,4,1.5</line>
			<line>5,0.5,4,0.5</line>
			<line>5,-0.5,4,-0.5</line>

<!-- #			CLOCK -->
			<line>4,2,3,1.5</line>
			<line>4,1,3,1.5</line>

<!-- #			W -->
			<offset><point>3.3,0.9</point>
			<line>0,0,0.1,-0.8</line>
			<line>0.1,-0.8,0.2,-0.4</line>
			<line>0.3,-0.8,0.2,-0.4</line>
			<line>0.4,0,0.3,-0.8</line>
			</offset>

<!-- #			E -->
			<offset><point>3.3,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>2.7,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			R -->
			<offset><point>-.6,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			A -->
			<offset><point>0,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			M -->
			<offset><point>.6,0.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.4,0,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>3.3,5.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>-3.7,-3.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>3.3,-4.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			7 -->
			<offset><point>-3.7,5.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			7 -->
			<offset><point>-3.7,3.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			7 -->
			<offset><point>-3.7,-4.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>AI_RAM_12x16</name>
		<caption>12x16 RAM</caption>
		<logic_type>RAM</logic_type>
		<logic_param>DATA_BITS 16</logic_param>
		<logic_param>ADDRESS_BITS 12</logic_param>

		<param_dlg_data>
			<param>
				<type>FILE_OUT</type>
				<label>Save filename</label>
				<varname>LOGIC WRITE_FILE</varname>
			</param>
			<param>
				<type>FILE_IN</type>
				<label>Load filename</label>
				<varname>LOGIC READ_FILE</varname>
			</param>
		</param_dlg_data>

<!-- #		Data Inputs -->
		<input> <name>DATA_IN_0</name>
		          <point>7.5,11</point> 
		</input>
		<input> <name>DATA_IN_1</name>
		          <point>6.5,11</point> 
		</input>
		<input> <name>DATA_IN_2</name>
		          <point>5.5,11</point> 
		</input>
		<input> <name>DATA_IN_3</name>
		          <point>4.5,11</point> 
		</input>
		<input> <name>DATA_IN_4</name>
		          <point>3.5,11</point> 
		</input>
		<input> <name>DATA_IN_5</name>
		          <point>2.5,11</point> 
		</input>
		<input> <name>DATA_IN_6</name>
		          <point>1.5,11</point> 
		</input>
		<input> <name>DATA_IN_7</name>
		          <point>0.5,11</point> 
		</input>
		<input> <name>DATA_IN_8</name>
		          <point>-0.5,11</point> 
		</input>
		<input> <name>DATA_IN_9</name>
		          <point>-1.5,11</point> 
		</input>
		<input> <name>DATA_IN_10</name>
		          <point>-2.5,11</point> 
		</input>
		<input> <name>DATA_IN_11</name>
		          <point>-3.5,11</point> 
		</input>
		<input> <name>DATA_IN_12</name>
		          <point>-4.5,11</point> 
		</input>
		<input> <name>DATA_IN_13</name>
		          <point>-5.5,11</point> 
		</input>
		<input> <name>DATA_IN_14</name>
		          <point>-6.5,11</point> 
		</input>
		<input> <name>DATA_IN_15</name>
		          <point>-7.5,11</point> 
		</input>

<!-- #		Address Inputs -->

		<input> <name>ADDRESS_0</name>
		          <point>-9,-5.5</point> 
		</input>
		<input> <name>ADDRESS_1</name>
		          <point>-9,-4.5</point> 
		</input>
		<input> <name>ADDRESS_2</name>
		          <point>-9,-3.5</point> 
		</input>
		<input> <name>ADDRESS_3</name>
		          <point>-9,-2.5</point> 
		</input>
		<input> <name>ADDRESS_4</name>
		          <point>-9,-1.5</point> 
		</input>
		<input> <name>ADDRESS_5</name>
		          <point>-9,-0.5</point> 
		</input>
		<input> <name>ADDRESS_6</name>
		          <point>-9,0.5</point> 
		</input>
		<input> <name>ADDRESS_7</name>
		          <point>-9,1.5</point> 
		</input>
		<input> <name>ADDRESS_8</name>
		          <point>-9,2.5</point> 
		</input>
		<input> <name>ADDRESS_9</name>
		          <point>-9,3.5</point> 
		</input>
		<input> <name>ADDRESS_10</name>
		          <point>-9,4.5</point> 
		</input>
		<input> <name>ADDRESS_11</name>
		          <point>-9,5.5</point> 
		</input>


<!-- #		Misc Inputs CL,W,OE -->
		<input> <name>write_clock</name>
		          <point>9,1.5</point> 
		</input>
		<input> <name>write_enable</name>
		          <point>9,0.5</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>9,-0.5</point> 
		</input>

<!-- #		Data Out -->
		<output> <name>DATA_OUT_0</name>
		          <point>7.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_1</name>
		          <point>6.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_2</name>
		          <point>5.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_3</name>
		          <point>4.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_4</name>
		          <point>3.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_5</name>
		          <point>2.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_6</name>
		          <point>1.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_7</name>
		          <point>0.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_8</name>
		          <point>-0.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_9</name>
		          <point>-1.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_10</name>
		          <point>-2.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_11</name>
		          <point>-3.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_12</name>
		          <point>-4.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_13</name>
		          <point>-5.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_14</name>
		          <point>-6.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_15</name>
		          <point>-7.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>

		<shape>
<!-- #			Box -->
			<line>-8,10,8,10</line>
			<line>8,10,8,-10</line>
			<line>8,-10,-8,-10</line>
			<line>-8,-10,-8,10</line>

<!-- #			Data IN -->
			<line>7.5,10,7.5,11</line>
			<line>6.5,10,6.5,11</line>
			<line>5.5,10,5.5,11</line>
			<line>4.5,10,4.5,11</line>
			<line>3.5,10,3.5,11</line>
			<line>2.5,10,2.5,11</line>
			<line>1.5,10,1.5,11</line>
			<line>0.5,10,0.5,11</line>
			<line>-7.5,10,-7.5,11</line>
			<line>-6.5,10,-6.5,11</line>
			<line>-5.5,10,-5.5,11</line>
			<line>-4.5,10,-4.5,11</line>
			<line>-3.5,10,-3.5,11</line>
			<line>-2.5,10,-2.5,11</line>
			<line>-1.5,10,-1.5,11</line>
			<line>-0.5,10,-0.5,11</line>

<!-- #			Address		 -->
			<line>-8,-5.5,-9,-5.5</line>
			<line>-8,-4.5,-9,-4.5</line>
			<line>-8,-3.5,-9,-3.5</line>
			<line>-8,-2.5,-9,-2.5</line>
			<line>-8,-1.5,-9,-1.5</line>
			<line>-8,-0.5,-9,-0.5</line>
			<line>-8,5.5,-9,5.5</line>
			<line>-8,4.5,-9,4.5</line>
			<line>-8,3.5,-9,3.5</line>
			<line>-8,2.5,-9,2.5</line>
			<line>-8,1.5,-9,1.5</line>
			<line>-8,0.5,-9,0.5</line>
			
<!-- #			Data Out -->
			<line>7.5,-10,7.5,-11</line>
			<line>6.5,-10,6.5,-11</line>
			<line>5.5,-10,5.5,-11</line>
			<line>4.5,-10,4.5,-11</line>
			<line>3.5,-10,3.5,-11</line>
			<line>2.5,-10,2.5,-11</line>
			<line>1.5,-10,1.5,-11</line>
			<line>0.5,-10,0.5,-11</line>
			<line>-7.5,-10,-7.5,-11</line>
			<line>-6.5,-10,-6.5,-11</line>
			<line>-5.5,-10,-5.5,-11</line>
			<line>-4.5,-10,-4.5,-11</line>
			<line>-3.5,-10,-3.5,-11</line>
			<line>-2.5,-10,-2.5,-11</line>
			<line>-1.5,-10,-1.5,-11</line>
			<line>-0.5,-10,-0.5,-11</line>

<!-- #			Other Inputs -->
			<line>8,1.5,9,1.5</line>
			<line>8,0.5,9,0.5</line>
			<line>8,-0.5,9,-0.5</line>

<!-- #			CLOCK -->
			<line>8,2,7,1.5</line>
			<line>8,1,7,1.5</line>

<!-- #			W -->
			<offset><point>7.3,0.9</point>
			<line>0,0,0.1,-0.8</line>
			<line>0.1,-0.8,0.2,-0.4</line>
			<line>0.3,-0.8,0.2,-0.4</line>
			<line>0.4,0,0.3,-0.8</line>
			</offset>

<!-- #			E -->
			<offset><point>7.3,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>6.7,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			R -->
			<offset><point>-.6,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			A -->
			<offset><point>0,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			M -->
			<offset><point>.6,0.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.4,0,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-7.7,-5.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,5.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.4,5.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>7.3,-8.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,-8.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>-7.5,-8.9</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>7.3,9.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,9.7</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>-7.5,9.7</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>AM_RAM_16x16</name>
		<caption>16x16 RAM</caption>
		<logic_type>RAM</logic_type>
		<logic_param>DATA_BITS 16</logic_param>
		<logic_param>ADDRESS_BITS 16</logic_param>

		<param_dlg_data>
			<param>
				<type>FILE_OUT</type>
				<label>Save filename</label>
				<varname>LOGIC WRITE_FILE</varname>
			</param>
			<param>
				<type>FILE_IN</type>
				<label>Load filename</label>
				<varname>LOGIC READ_FILE</varname>
			</param>
		</param_dlg_data>

<!-- #		Data Inputs -->
		<input> <name>DATA_IN_0</name>
		          <point>7.5,11</point> 
		</input>
		<input> <name>DATA_IN_1</name>
		          <point>6.5,11</point> 
		</input>
		<input> <name>DATA_IN_2</name>
		          <point>5.5,11</point> 
		</input>
		<input> <name>DATA_IN_3</name>
		          <point>4.5,11</point> 
		</input>
		<input> <name>DATA_IN_4</name>
		          <point>3.5,11</point> 
		</input>
		<input> <name>DATA_IN_5</name>
		          <point>2.5,11</point> 
		</input>
		<input> <name>DATA_IN_6</name>
		          <point>1.5,11</point> 
		</input>
		<input> <name>DATA_IN_7</name>
		          <point>0.5,11</point> 
		</input>
		<input> <name>DATA_IN_8</name>
		          <point>-0.5,11</point> 
		</input>
		<input> <name>DATA_IN_9</name>
		          <point>-1.5,11</point> 
		</input>
		<input> <name>DATA_IN_10</name>
		          <point>-2.5,11</point> 
		</input>
		<input> <name>DATA_IN_11</name>
		          <point>-3.5,11</point> 
		</input>
		<input> <name>DATA_IN_12</name>
		          <point>-4.5,11</point> 
		</input>
		<input> <name>DATA_IN_13</name>
		          <point>-5.5,11</point> 
		</input>
		<input> <name>DATA_IN_14</name>
		          <point>-6.5,11</point> 
		</input>
		<input> <name>DATA_IN_15</name>
		          <point>-7.5,11</point> 
		</input>

<!-- #		Address Inputs -->
		<input> <name>ADDRESS_0</name>
		          <point>-9,-7.5</point> 
		</input>
		<input> <name>ADDRESS_1</name>
		          <point>-9,-6.5</point> 
		</input>
		<input> <name>ADDRESS_2</name>
		          <point>-9,-5.5</point> 
		</input>
		<input> <name>ADDRESS_3</name>
		          <point>-9,-4.5</point> 
		</input>
		<input> <name>ADDRESS_4</name>
		          <point>-9,-3.5</point> 
		</input>
		<input> <name>ADDRESS_5</name>
		          <point>-9,-2.5</point> 
		</input>
		<input> <name>ADDRESS_6</name>
		          <point>-9,-1.5</point> 
		</input>
		<input> <name>ADDRESS_7</name>
		          <point>-9,-0.5</point> 
		</input>
		<input> <name>ADDRESS_8</name>
		          <point>-9,0.5</point> 
		</input>
		<input> <name>ADDRESS_9</name>
		          <point>-9,1.5</point> 
		</input>
		<input> <name>ADDRESS_10</name>
		          <point>-9,2.5</point> 
		</input>
		<input> <name>ADDRESS_11</name>
		          <point>-9,3.5</point> 
		</input>
		<input> <name>ADDRESS_12</name>
		          <point>-9,4.5</point> 
		</input>
		<input> <name>ADDRESS_13</name>
		          <point>-9,5.5</point> 
		</input>
		<input> <name>ADDRESS_14</name>
		          <point>-9,6.5</point> 
		</input>
		<input> <name>ADDRESS_15</name>
		          <point>-9,7.5</point> 
		</input>

<!-- #		Misc Inputs CL,W,OE -->
		<input> <name>write_clock</name>
		          <point>9,1.5</point> 
		</input>
		<input> <name>write_enable</name>
		          <point>9,0.5</point> 
		</input>
		<input> <name>ENABLE_0</name>
		          <point>9,-0.5</point> 
		</input>

<!-- #		Data Out -->
		<output> <name>DATA_OUT_0</name>
		          <point>7.5,-11</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_1</name>
		          <point>6.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_2</name>
		          <point>5.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_3</name>
		          <point>4.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_4</name>
		          <point>3.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_5</name>
		          <point>2.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_6</name>
		          <point>1.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_7</name>
		          <point>0.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_8</name>
		          <point>-0.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_9</name>
		          <point>-1.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_10</name>
		          <point>-2.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_11</name>
		          <point>-3.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_12</name>
		          <point>-4.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_13</name>
		          <point>-5.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_14</name>
		          <point>-6.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_15</name>
		          <point>-7.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>

		<shape>
<!-- #			Box -->
			<line>-8,10,8,10</line>
			<line>8,10,8,-10</line>
			<line>8,-10,-8,-10</line>
			<line>-8,-10,-8,10</line>

<!-- #			Data IN -->
			<line>7.5,10,7.5,11</line>
			<line>6.5,10,6.5,11</line>
			<line>5.5,10,5.5,11</line>
			<line>4.5,10,4.5,11</line>
			<line>3.5,10,3.5,11</line>
			<line>2.5,10,2.5,11</line>
			<line>1.5,10,1.5,11</line>
			<line>0.5,10,0.5,11</line>
			<line>-7.5,10,-7.5,11</line>
			<line>-6.5,10,-6.5,11</line>
			<line>-5.5,10,-5.5,11</line>
			<line>-4.5,10,-4.5,11</line>
			<line>-3.5,10,-3.5,11</line>
			<line>-2.5,10,-2.5,11</line>
			<line>-1.5,10,-1.5,11</line>
			<line>-0.5,10,-0.5,11</line>

<!-- #			Address		 -->
			<line>-8,-7.5,-9,-7.5</line>
			<line>-8,-6.5,-9,-6.5</line>
			<line>-8,-5.5,-9,-5.5</line>
			<line>-8,-4.5,-9,-4.5</line>
			<line>-8,-3.5,-9,-3.5</line>
			<line>-8,-2.5,-9,-2.5</line>
			<line>-8,-1.5,-9,-1.5</line>
			<line>-8,-0.5,-9,-0.5</line>
			<line>-8,7.5,-9,7.5</line>
			<line>-8,6.5,-9,6.5</line>
			<line>-8,5.5,-9,5.5</line>
			<line>-8,4.5,-9,4.5</line>
			<line>-8,3.5,-9,3.5</line>
			<line>-8,2.5,-9,2.5</line>
			<line>-8,1.5,-9,1.5</line>
			<line>-8,0.5,-9,0.5</line>

<!-- #			Data Out -->
			<line>7.5,-10,7.5,-11</line>
			<line>6.5,-10,6.5,-11</line>
			<line>5.5,-10,5.5,-11</line>
			<line>4.5,-10,4.5,-11</line>
			<line>3.5,-10,3.5,-11</line>
			<line>2.5,-10,2.5,-11</line>
			<line>1.5,-10,1.5,-11</line>
			<line>0.5,-10,0.5,-11</line>
			<line>-7.5,-10,-7.5,-11</line>
			<line>-6.5,-10,-6.5,-11</line>
			<line>-5.5,-10,-5.5,-11</line>
			<line>-4.5,-10,-4.5,-11</line>
			<line>-3.5,-10,-3.5,-11</line>
			<line>-2.5,-10,-2.5,-11</line>
			<line>-1.5,-10,-1.5,-11</line>
			<line>-0.5,-10,-0.5,-11</line>

<!-- #			Other Inputs -->
			<line>8,1.5,9,1.5</line>
			<line>8,0.5,9,0.5</line>
			<line>8,-0.5,9,-0.5</line>

<!-- #			CLOCK -->
			<line>8,2,7,1.5</line>
			<line>8,1,7,1.5</line>

<!-- #			W -->
			<offset><point>7.3,0.9</point>
			<line>0,0,0.1,-0.8</line>
			<line>0.1,-0.8,0.2,-0.4</line>
			<line>0.3,-0.8,0.2,-0.4</line>
			<line>0.4,0,0.3,-0.8</line>
			</offset>

<!-- #			E -->
			<offset><point>7.3,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>6.7,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			R -->
			<offset><point>-.6,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			A -->
			<offset><point>0,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			M -->
			<offset><point>.6,0.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.4,0,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-7.7,-7.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,7.8</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>-7.5,7.8</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>7.3,-8.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,-8.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>-7.5,-8.9</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>7.3,9.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,9.7</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>-7.5,9.7</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>BA_ROM_4x4</name>
		<caption>4x4 ROM</caption>
		<logic_type>RAM</logic_type>
		<logic_param>DATA_BITS 4</logic_param>
		<logic_param>ADDRESS_BITS 4</logic_param>

		<param_dlg_data>
			<param>
				<type>FILE_OUT</type>
				<label>Save filename</label>
				<varname>LOGIC WRITE_FILE</varname>
			</param>
			<param>
				<type>FILE_IN</type>
				<label>Load filename</label>
				<varname>LOGIC READ_FILE</varname>
			</param>
		</param_dlg_data>

<!-- #		Address Inputs -->
		<input> <name>ADDRESS_0</name>
		          <point>-5,-1.5</point> 
		</input>
		<input> <name>ADDRESS_1</name>
		          <point>-5,-0.5</point> 
		</input>
		<input> <name>ADDRESS_2</name>
		          <point>-5,0.5</point> 
		</input>
		<input> <name>ADDRESS_3</name>
		          <point>-5,1.5</point> 
		</input>
		
<!-- #		Misc Inputs OE -->
		<input> <name>ENABLE_0</name>
		          <point>5,-0.5</point> 
		</input>

<!-- #		Data Out -->
		<output> <name>DATA_OUT_0</name>
		          <point>1.5,-5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_1</name>
		          <point>0.5,-5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_2</name>
		          <point>-0.5,-5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_3</name>
		          <point>-1.5,-5</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		
		<shape>
<!-- #			Box -->
			<line>-4,4,4,4</line>
			<line>4,4,4,-4</line>
			<line>4,-4,-4,-4</line>
			<line>-4,-4,-4,4</line>

<!-- #			Address		 -->
			<line>-5,1.5,-4,1.5</line>
			<line>-5,0.5,-4,0.5</line>
			<line>-5,-0.5,-4,-0.5</line>
			<line>-5,-1.5,-4,-1.5</line>

<!-- #			Data Out -->
			<line>1.5,-4,1.5,-5</line>
			<line>0.5,-4,0.5,-5</line>
			<line>-0.5,-4,-0.5,-5</line>
			<line>-1.5,-4,-1.5,-5</line>

<!-- #			Other Inputs -->
			<line>5,-0.5,4,-0.5</line>

<!-- #			E -->
			<offset><point>3.3,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>2.7,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			R -->
			<offset><point>-.6,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			O -->
			<offset><point>0,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			M -->
			<offset><point>.6,0.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.4,0,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-3.7,-1.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>1.3,-2.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>-3.7,1.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			3 -->
			<offset><point>-1.7,-2.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>			
			</offset>
		</shape>
	</gate>
	<gate> <name>BE_ROM_8x8</name>
		<caption>8x8 ROM</caption>
		<logic_type>RAM</logic_type>
		<logic_param>DATA_BITS 8</logic_param>
		<logic_param>ADDRESS_BITS 8</logic_param>

		<param_dlg_data>
			<param>
				<type>FILE_OUT</type>
				<label>Save filename</label>
				<varname>LOGIC WRITE_FILE</varname>
			</param>
			<param>
				<type>FILE_IN</type>
				<label>Load filename</label>
				<varname>LOGIC READ_FILE</varname>
			</param>
		</param_dlg_data>

<!-- #		Address Inputs -->
		<input> <name>ADDRESS_0</name>
		          <point>-5,-3.5</point> 
		</input>
		<input> <name>ADDRESS_1</name>
		          <point>-5,-2.5</point> 
		</input>
		<input> <name>ADDRESS_2</name>
		          <point>-5,-1.5</point> 
		</input>
		<input> <name>ADDRESS_3</name>
		          <point>-5,-0.5</point> 
		</input>
		<input> <name>ADDRESS_4</name>
		          <point>-5,0.5</point> 
		</input>
		<input> <name>ADDRESS_5</name>
		          <point>-5,1.5</point> 
		</input>
		<input> <name>ADDRESS_6</name>
		          <point>-5,2.5</point> 
		</input>
		<input> <name>ADDRESS_7</name>
		          <point>-5,3.5</point> 
		</input>

<!-- #		Misc Inputs OE -->
		<input> <name>ENABLE_0</name>
		          <point>5,-0.5</point> 
		</input>

<!-- #		Data Out -->
		<output> <name>DATA_OUT_0</name>
		          <point>3.5,-7</point>
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_1</name>
		          <point>2.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_2</name>
		          <point>1.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_3</name>
		          <point>0.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_4</name>
		          <point>-0.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_5</name>
		          <point>-1.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_6</name>
		          <point>-2.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_7</name>
		          <point>-3.5,-7</point> 
				<enable_input>ENABLE_0</enable_input>
		</output>

		<shape>
<!-- #			Box -->
			<line>-4,6,4,6</line>
			<line>4,6,4,-6</line>
			<line>4,-6,-4,-6</line>
			<line>-4,-6,-4,6</line>

<!-- #			Address		 -->
			<line>-4,3.5,-5,3.5</line>
			<line>-4,2.5,-5,2.5</line>
			<line>-4,1.5,-5,1.5</line>
			<line>-4,0.5,-5,0.5</line>
			<line>-4,-0.5,-5,-0.5</line>
			<line>-4,-1.5,-5,-1.5</line>
			<line>-4,-2.5,-5,-2.5</line>
			<line>-4,-3.5,-5,-3.5</line>

<!-- #			Data Out -->
			<line>-3.5,-6,-3.5,-7</line>
			<line>-2.5,-6,-2.5,-7</line>
			<line>-1.5,-6,-1.5,-7</line>
			<line>-0.5,-6,-0.5,-7</line>
			<line>0.5,-6,0.5,-7</line>
			<line>1.5,-6,1.5,-7</line>
			<line>2.5,-6,2.5,-7</line>
			<line>3.5,-6,3.5,-7</line>

<!-- #			Other Inputs -->
			<line>5,-0.5,4,-0.5</line>

<!-- #			E -->
			<offset><point>3.3,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>2.7,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			R -->
			<offset><point>-.6,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			O -->
			<offset><point>0,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			M -->
			<offset><point>.6,0.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.4,0,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-3.7,-3.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>3.3,-4.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			7 -->
			<offset><point>-3.7,3.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			7 -->
			<offset><point>-3.7,-4.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>BI_ROM_12x16</name>
		<caption>12x16 ROM</caption>
		<logic_type>RAM</logic_type>
		<logic_param>DATA_BITS 16</logic_param>
		<logic_param>ADDRESS_BITS 12</logic_param>

		<param_dlg_data>
			<param>
				<type>FILE_OUT</type>
				<label>Save filename</label>
				<varname>LOGIC WRITE_FILE</varname>
			</param>
			<param>
				<type>FILE_IN</type>
				<label>Load filename</label>
				<varname>LOGIC READ_FILE</varname>
			</param>
		</param_dlg_data>

<!-- #		Address Inputs -->

<!-- #		Address Inputs -->

		<input> <name>ADDRESS_0</name>
		          <point>-9,-5.5</point> 
		</input>
		<input> <name>ADDRESS_1</name>
		          <point>-9,-4.5</point> 
		</input>
		<input> <name>ADDRESS_2</name>
		          <point>-9,-3.5</point> 
		</input>
		<input> <name>ADDRESS_3</name>
		          <point>-9,-2.5</point> 
		</input>
		<input> <name>ADDRESS_4</name>
		          <point>-9,-1.5</point> 
		</input>
		<input> <name>ADDRESS_5</name>
		          <point>-9,-0.5</point> 
		</input>
		<input> <name>ADDRESS_6</name>
		          <point>-9,0.5</point> 
		</input>
		<input> <name>ADDRESS_7</name>
		          <point>-9,1.5</point> 
		</input>
		<input> <name>ADDRESS_8</name>
		          <point>-9,2.5</point> 
		</input>
		<input> <name>ADDRESS_9</name>
		          <point>-9,3.5</point> 
		</input>
		<input> <name>ADDRESS_10</name>
		          <point>-9,4.5</point> 
		</input>
		<input> <name>ADDRESS_11</name>
		          <point>-9,5.5</point> 
		</input>


<!-- #		Misc Inputs OE -->
		<input> <name>ENABLE_0</name>
		          <point>9,-0.5</point> 
		</input>

<!-- #		Data Out -->
		<output> <name>DATA_OUT_0</name>
		          <point>7.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_1</name>
		          <point>6.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_2</name>
		          <point>5.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_3</name>
		          <point>4.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_4</name>
		          <point>3.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_5</name>
		          <point>2.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_6</name>
		          <point>1.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_7</name>
		          <point>0.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_8</name>
		          <point>-0.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_9</name>
		          <point>-1.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_10</name>
		          <point>-2.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_11</name>
		          <point>-3.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_12</name>
		          <point>-4.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_13</name>
		          <point>-5.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_14</name>
		          <point>-6.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_15</name>
		          <point>-7.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>

		<shape>
<!-- #			Box -->
			<line>-8,10,8,10</line>
			<line>8,10,8,-10</line>
			<line>8,-10,-8,-10</line>
			<line>-8,-10,-8,10</line>

<!-- #			Address		 -->
			<line>-8,-5.5,-9,-5.5</line>
			<line>-8,-4.5,-9,-4.5</line>
			<line>-8,-3.5,-9,-3.5</line>
			<line>-8,-2.5,-9,-2.5</line>
			<line>-8,-1.5,-9,-1.5</line>
			<line>-8,-0.5,-9,-0.5</line>
			<line>-8,5.5,-9,5.5</line>
			<line>-8,4.5,-9,4.5</line>
			<line>-8,3.5,-9,3.5</line>
			<line>-8,2.5,-9,2.5</line>
			<line>-8,1.5,-9,1.5</line>
			<line>-8,0.5,-9,0.5</line>
			
<!-- #			Data Out -->
			<line>7.5,-10,7.5,-11</line>
			<line>6.5,-10,6.5,-11</line>
			<line>5.5,-10,5.5,-11</line>
			<line>4.5,-10,4.5,-11</line>
			<line>3.5,-10,3.5,-11</line>
			<line>2.5,-10,2.5,-11</line>
			<line>1.5,-10,1.5,-11</line>
			<line>0.5,-10,0.5,-11</line>
			<line>-7.5,-10,-7.5,-11</line>
			<line>-6.5,-10,-6.5,-11</line>
			<line>-5.5,-10,-5.5,-11</line>
			<line>-4.5,-10,-4.5,-11</line>
			<line>-3.5,-10,-3.5,-11</line>
			<line>-2.5,-10,-2.5,-11</line>
			<line>-1.5,-10,-1.5,-11</line>
			<line>-0.5,-10,-0.5,-11</line>

<!-- #			Other Inputs -->
			<line>8,-0.5,9,-0.5</line>

<!-- #			E -->
			<offset><point>7.3,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>6.7,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			R -->
			<offset><point>-.6,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			O -->
			<offset><point>0,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			M -->
			<offset><point>.6,0.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.4,0,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-7.7,-5.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,5.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.4,5.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>7.3,-8.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,-8.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>-7.5,-8.9</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>BM_ROM_16x16</name>
		<caption>16x16 ROM</caption>
		<logic_type>RAM</logic_type>
		<logic_param>DATA_BITS 16</logic_param>
		<logic_param>ADDRESS_BITS 16</logic_param>

		<param_dlg_data>
			<param>
				<type>FILE_OUT</type>
				<label>Save filename</label>
				<varname>LOGIC WRITE_FILE</varname>
			</param>
			<param>
				<type>FILE_IN</type>
				<label>Load filename</label>
				<varname>LOGIC READ_FILE</varname>
			</param>
		</param_dlg_data>

<!-- #		Address Inputs -->
		<input> <name>ADDRESS_0</name>
		          <point>-9,-7.5</point> 
		</input>
		<input> <name>ADDRESS_1</name>
		          <point>-9,-6.5</point> 
		</input>
		<input> <name>ADDRESS_2</name>
		          <point>-9,-5.5</point> 
		</input>
		<input> <name>ADDRESS_3</name>
		          <point>-9,-4.5</point> 
		</input>
		<input> <name>ADDRESS_4</name>
		          <point>-9,-3.5</point> 
		</input>
		<input> <name>ADDRESS_5</name>
		          <point>-9,-2.5</point> 
		</input>
		<input> <name>ADDRESS_6</name>
		          <point>-9,-1.5</point> 
		</input>
		<input> <name>ADDRESS_7</name>
		          <point>-9,-0.5</point> 
		</input>
		<input> <name>ADDRESS_8</name>
		          <point>-9,0.5</point> 
		</input>
		<input> <name>ADDRESS_9</name>
		          <point>-9,1.5</point> 
		</input>
		<input> <name>ADDRESS_10</name>
		          <point>-9,2.5</point> 
		</input>
		<input> <name>ADDRESS_11</name>
		          <point>-9,3.5</point> 
		</input>
		<input> <name>ADDRESS_12</name>
		          <point>-9,4.5</point> 
		</input>
		<input> <name>ADDRESS_13</name>
		          <point>-9,5.5</point> 
		</input>
		<input> <name>ADDRESS_14</name>
		          <point>-9,6.5</point> 
		</input>
		<input> <name>ADDRESS_15</name>
		          <point>-9,7.5</point> 
		</input>

<!-- #		Misc Inputs OE -->
		<input> <name>ENABLE_0</name>
		          <point>9,-0.5</point> 
		</input>

<!-- #		Data Out -->
		<output> <name>DATA_OUT_0</name>
		          <point>7.5,-11</point>
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_1</name>
		          <point>6.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_2</name>
		          <point>5.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_3</name>
		          <point>4.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_4</name>
		          <point>3.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_5</name>
		          <point>2.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_6</name>
		          <point>1.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_7</name>
		          <point>0.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_8</name>
		          <point>-0.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_9</name>
		          <point>-1.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_10</name>
		          <point>-2.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_11</name>
		          <point>-3.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_12</name>
		          <point>-4.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_13</name>
		          <point>-5.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_14</name>
		          <point>-6.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>
		<output> <name>DATA_OUT_15</name>
		          <point>-7.5,-11</point> 
			<enable_input>ENABLE_0</enable_input>
		</output>

		<shape>
<!-- #			Box -->
			<line>-8,10,8,10</line>
			<line>8,10,8,-10</line>
			<line>8,-10,-8,-10</line>
			<line>-8,-10,-8,10</line>

<!-- #			Address		 -->
			<line>-8,-7.5,-9,-7.5</line>
			<line>-8,-6.5,-9,-6.5</line>
			<line>-8,-5.5,-9,-5.5</line>
			<line>-8,-4.5,-9,-4.5</line>
			<line>-8,-3.5,-9,-3.5</line>
			<line>-8,-2.5,-9,-2.5</line>
			<line>-8,-1.5,-9,-1.5</line>
			<line>-8,-0.5,-9,-0.5</line>
			<line>-8,7.5,-9,7.5</line>
			<line>-8,6.5,-9,6.5</line>
			<line>-8,5.5,-9,5.5</line>
			<line>-8,4.5,-9,4.5</line>
			<line>-8,3.5,-9,3.5</line>
			<line>-8,2.5,-9,2.5</line>
			<line>-8,1.5,-9,1.5</line>
			<line>-8,0.5,-9,0.5</line>

<!-- #			Data Out -->
			<line>7.5,-10,7.5,-11</line>
			<line>6.5,-10,6.5,-11</line>
			<line>5.5,-10,5.5,-11</line>
			<line>4.5,-10,4.5,-11</line>
			<line>3.5,-10,3.5,-11</line>
			<line>2.5,-10,2.5,-11</line>
			<line>1.5,-10,1.5,-11</line>
			<line>0.5,-10,0.5,-11</line>
			<line>-7.5,-10,-7.5,-11</line>
			<line>-6.5,-10,-6.5,-11</line>
			<line>-5.5,-10,-5.5,-11</line>
			<line>-4.5,-10,-4.5,-11</line>
			<line>-3.5,-10,-3.5,-11</line>
			<line>-2.5,-10,-2.5,-11</line>
			<line>-1.5,-10,-1.5,-11</line>
			<line>-0.5,-10,-0.5,-11</line>

<!-- #			Other Inputs -->
			<line>8,-0.5,9,-0.5</line>

<!-- #			E -->
			<offset><point>7.3,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			0 -->
			<offset><point>6.7,-0.1</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			R -->
			<offset><point>-.6,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0,-0.8</line>
			<line>0,-0.4,0.4,-0.8</line>
			</offset>

<!-- #			O -->
			<offset><point>0,0.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			M -->
			<offset><point>.6,0.2</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.4,0,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-7.7,-7.2</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,7.8</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>-7.5,7.8</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>7.3,-8.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			1 -->
			<offset><point>-7.7,-8.9</point>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			5 -->
			<offset><point>-7.5,-8.9</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>
		</shape>
	</gate>
</library>
<library> <name>6 - Add &amp; Compare</name>
	<gate> <name>AA_FULLADDER_1BIT</name>
		<caption>1-Bit Full Adder</caption>
		<logic_type>ADDER</logic_type>
		<logic_param>INPUT_BITS 1</logic_param>

<!-- #		X,Y,Cin -->
		<input> <name>IN_0</name>
		          <point>1,3</point> 
		</input>
		<input> <name>IN_B_0</name>
		          <point>-1,3</point> 
		</input>
		<input> <name>carry_in</name>
		          <point>4,0</point> 
		</input>
		
<!-- #		Co and S -->
		<output> <name>carry_out</name>
		          <point>0,-3</point> 
		</output>
		<output> <name>OUT_0</name>
		          <point>-4,0</point> 
		</output>
	
		<shape>
<!-- #			Box -->
			<line>-3,2,3,2</line>
			<line>3,2,3,-2</line>
			<line>3,-2,-3,-2</line>
			<line>-3,-2,-3,2</line>

<!-- #			X and Y  Input -->
			<line>-1,2,-1,3</line>
			<line>1,2,1,3</line>

<!-- #			Cin and Cout -->
			<line>4,0,3,0</line>
			<line>-3,0,-4,0</line>

<!-- #			S Output -->
			<line>0,-2,0,-3</line>

<!-- #			C -->
			<offset><point>-2.7,0.4</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-2.2,0.4</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			C -->
			<offset><point>1.8,0.4</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			I -->
			<offset><point>2.3,0.4</point>
			<line>0.2,0,0.2,-0.8</line>
			<line>0,0,0.4,0</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			X -->
			<offset><point>-1.2,1.7</point>
			<line>0,0,0.4,-0.8</line>
			<line>0,-0.8,0.4,0</line>
			</offset>

<!-- #			Y -->
			<offset><point>0.8,1.7</point>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.2,-0.4,0.2,-0.8</line>
			</offset>

<!-- #			F -->
			<offset><point>-0.5,0.4</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.4,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			A -->
			<offset><point>0.1,0.4</point>
			<line>0,0,0.4,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			S -->
			<offset><point>-0.2,-0.9</point>
			<line>0.4,0,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0,-0.2</line>
			<line>0,-0.2,0.4,-0.6</line>
			<line>0.4,-0.7,0.4,-0.6</line>
			<line>0.4,-0.7,0.3,-0.8</line>
			<line>0.3,-0.8,0,-0.8</line>
			</offset>
		</shape>
	</gate>
	<gate> <name>AE_FULLADDER_4BIT</name>
		<caption>4-Bit Full Adder</caption>
		<logic_type>ADDER</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>

<!-- #		X -->
		<input> <name>IN_0</name>
		          <point>-2,4</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,4</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-4,4</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-5,4</point> 
		</input>

<!-- #		Y -->
		<input> <name>IN_B_0</name>
		          <point>5,4</point> 
		</input>
		<input> <name>IN_B_1</name>
		          <point>4,4</point> 
		</input>
		<input> <name>IN_B_2</name>
		          <point>3,4</point> 
		</input>
		<input> <name>IN_B_3</name>
		          <point>2,4</point> 
		</input>

<!-- #		Cin -->
		<input> <name>carry_in</name>
		          <point>8,1</point> 
		</input>

<!-- #		S -->
		<output> <name>OUT_0</name>
		          <point>1.5,-4</point> 
		</output>
		<output> <name>OUT_1</name>
		          <point>0.5,-4</point> 
		</output>
		<output> <name>OUT_2</name>
		          <point>-0.5,-4</point> 
		</output>
		<output> <name>OUT_3</name>
		          <point>-1.5,-4</point> 
		</output>
		
<!-- #		Co -->
		<output> <name>carry_out</name>
		          <point>-8,1</point> 
		</output>

<!-- #		V -->
		<output> <name>overflow</name>
		          <point>-8,-1</point> 
		</output>
	
		<shape>
<!-- #			Box -->
			<line>7,3,7,-3</line>
			<line>7,-3,-7,-3</line>
			<line>-7,-3,-7,3</line>
			<line>-7,3,7,3</line>

<!-- #			X Inputs -->
			<line>-2,3,-2,4</line>
			<line>-3,3,-3,4</line>
			<line>-4,3,-4,4</line>
			<line>-5,3,-5,4</line>

<!-- #			Y Inputs -->
			<line>5,3,5,4</line>
			<line>4,3,4,4</line>
			<line>3,3,3,4</line>
			<line>2,3,2,4</line>

<!-- #			Cout,V,Cin -->
			<line>-7,1,-8,1</line>
			<line>-7,-1,-8,-1</line>
			<line>7,1,8,1</line>

<!-- #			S Outputs -->
			<line>1.5,-3,1.5,-4</line>
			<line>0.5,-3,0.5,-4</line>
			<line>-0.5,-3,-0.5,-4</line>
			<line>-1.5,-3,-1.5,-4</line>

<!-- #			C -->
			<offset><point>-6.7,1.4</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>-6.2,1.4</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			V -->
			<offset><point>-6.7,-0.6</point>
			<line>0,0,0.2,-0.8</line>
			<line>0.2,-0.8,0.4,0</line>
			</offset>

<!-- #			C -->
			<offset><point>5.8,1.4</point>
			<line>0,0,0.4,0</line>
			<line>0,0,0,-0.8</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			I -->
			<offset><point>6.3,1.4</point>
			<line>0.2,0,0.2,-0.8</line>
			<line>0,0,0.4,0</line>
			<line>0,-0.8,0.4,-0.8</line>
			</offset>

<!-- #			X -->
			<offset><point>-3.7,1.9</point>
			<line>0,0,0.4,-0.8</line>
			<line>0,-0.8,0.4,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>-2.2,2.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>-5.2,2.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			Y -->
			<offset><point>3.3,1.9</point>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.2,-0.4,0.2,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>4.8,2.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>1.7,2.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			F -->
			<offset><point>-0.5,0.4</point>
			<line>0,0,0,-0.8</line>
			<line>0,0,0.4,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			</offset>

<!-- #			A -->
			<offset><point>0.1,0.4</point>
			<line>0,0,0.4,0</line>
			<line>0,-0.4,0.4,-0.4</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0,0,0,-0.8</line>
			</offset>

<!-- #			S -->
			<offset><point>-0.2,-0.9</point>
			<line>0.4,0,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0.1,0</line>
			<line>0,-0.1,0,-0.2</line>
			<line>0,-0.2,0.4,-0.6</line>
			<line>0.4,-0.7,0.4,-0.6</line>
			<line>0.4,-0.7,0.3,-0.8</line>
			<line>0.3,-0.8,0,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>1.3,-1.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>-1.7,-1.9</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

		</shape>
	</gate>
<!-- #	<gate> <name>AI_FULLADDER_8BIT</name> -->
<!-- #NOTE: Need to make 8-bit full adder shape. -->
<!-- #		<caption>8-Bit Full Adder (TODO)</caption> -->
<!-- #	</gate> -->
	<gate> <name>BE_COMPARATOR_4BIT</name>
		<caption>4-Bit Magnitude Comparator</caption>
		<logic_type>COMPARE</logic_type>
		<logic_param>INPUT_BITS 4</logic_param>

<!-- #		X -->
		<input> <name>IN_0</name>
		          <point>-2,4</point> 
		</input>
		<input> <name>IN_1</name>
		          <point>-3,4</point> 
		</input>
		<input> <name>IN_2</name>
		          <point>-4,4</point> 
		</input>
		<input> <name>IN_3</name>
		          <point>-5,4</point> 
		</input>

<!-- #		Y -->
		<input> <name>IN_B_0</name>
		          <point>5,4</point> 
		</input>
		<input> <name>IN_B_1</name>
		          <point>4,4</point> 
		</input>
		<input> <name>IN_B_2</name>
		          <point>3,4</point> 
		</input>
		<input> <name>IN_B_3</name>
		          <point>2,4</point> 
		</input>

<!-- #		Input Carry: -->
		<input> <name>in_A_greater_B</name>
		          <point>8,2</point> 
		</input>
		<input> <name>in_A_equal_B</name>
		          <point>8,0</point> 
		</input>
		<input> <name>in_A_less_B</name>
		          <point>8,-2</point> 
		</input>

<!-- #		Output Values: -->
		<output> <name>A_greater_B</name>
		          <point>-8,2</point> 
		</output>
		<output> <name>A_equal_B</name>
		          <point>-8,0</point> 
		</output>
		<output> <name>A_less_B</name>
		          <point>-8,-2</point> 
		</output>
		
		<shape>
<!-- #			Box -->
			<line>7,3,7,-3</line>
			<line>7,-3,-7,-3</line>
			<line>-7,-3,-7,3</line>
			<line>-7,3,7,3</line>

<!-- #			X Inputs -->
			<line>-2,3,-2,4</line>
			<line>-3,3,-3,4</line>
			<line>-4,3,-4,4</line>
			<line>-5,3,-5,4</line>

<!-- #			Y Inputs -->
			<line>5,3,5,4</line>
			<line>4,3,4,4</line>
			<line>3,3,3,4</line>
			<line>2,3,2,4</line>

<!-- #			Inputs: -->
			<line>7,2,8,2</line>
			<line>7,-2,8,-2</line>
			<line>7,0,8,0</line>

<!-- #			Outputs: -->
			<line>-7,2,-8,2</line>
			<line>-7,-2,-8,-2</line>
			<line>-7,0,-8,0</line>

<!-- #			X -->
			<offset><point>-3.7,1.9</point>
			<line>0,0,0.4,-0.8</line>
			<line>0,-0.8,0.4,0</line>
			</offset>

<!-- #			0 -->
			<offset><point>-2.2,2.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>-5.2,2.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			Y -->
			<offset><point>3.3,1.9</point>
			<line>0,0,0.2,-0.4</line>
			<line>0.4,0,0.2,-0.4</line>
			<line>0.2,-0.4,0.2,-0.8</line>
			</offset>

<!-- #			0 -->
			<offset><point>4.8,2.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.4</line>
			<line>0.4,-0.4,0.4,-0.8</line>
			<line>0.4,-0.8,0,-0.8</line>
			<line>0,-0.8,0,-0.4</line>
			<line>0,-0.4,0,0</line>
			</offset>

<!-- #			3 -->
			<offset><point>1.7,2.7</point>
			<line>0,0,0.4,0</line>
			<line>0.4,0,0.4,-0.8</line>
			<line>0.4,-0.4,0,-0.4</line>
			<line>0.4,-0.8,0,-0.8</line>
			</offset>

<!-- #			> -->
			<offset><point>-6.7,2.2</point>
			<line>0,0,0.4,-0.2</line>
			<line>0,-0.4,0.4,-0.2</line>
			</offset>

<!-- #			= -->
			<offset><point>-6.7,0.1</point>
			<line>0,0,0.4,0</line>
			<line>0,-0.2,0.4,-0.2</line>
			</offset>

<!-- #			< -->
			<offset><point>-6.7,-1.8</point>
			<line>0.4,0,0,-0.2</line>
			<line>0.4,-0.4,0,-0.2</line>
			</offset>

		</shape>
	</gate>
<!-- #	<gate> <name>BI_COMPARATOR_8BIT</name> -->
<!-- #NOTE: Need to make comparator shape! -->
<!-- #		<caption>8-Bit Magnitude Comparator (TODO)</caption> -->
<!-- #	</gate> -->
</library>
<library> <name>4 - Decorations</name>
	<gate> <name>AA_LABEL</name>
		<caption>Label</caption>
		<gui_type>LABEL</gui_type>
		<gui_param>LABEL_TEXT Text</gui_param>
		<gui_param>TEXT_HEIGHT 2.0</gui_param>
		<param_dlg_data>
			<param>
				<type>STRING</type>
				<label>Label</label>
<!-- # Specify the type (LOGIC or GUI) and the param's name: -->
				<varname>GUI LABEL_TEXT</varname>
			</param>
		</param_dlg_data>
		<param_dlg_data>
			<param>
				<type>FLOAT</type>
				<label>Text Height</label>
<!-- # Specify the type (LOGIC or GUI) and the param's name: -->
				<varname>GUI TEXT_HEIGHT</varname>
				<range>0.05,50</range>
			</param>
		</param_dlg_data>
	</gate>
</library>
</libraries>