diff --git a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
index 740a24d96ec..300e355c8ef 100644
--- a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
@@ -27,11 +27,6 @@
 	};
 };
 
-&reg_usb_otg_vbus {
-	gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-	enable-active-high;
-};
-
 &wdog1 {
 	bootph-pre-ram;
 };
diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
index 12013aa5a4d..93ee5b7ee0c 100644
--- a/board/beacon/imx8mm/spl.c
+++ b/board/beacon/imx8mm/spl.c
@@ -100,9 +100,6 @@ void board_init_f(ulong dummy)
 	int ret;
 
 	arch_cpu_init();
-
-	init_uart_clk(1);
-
 	timer_init();
 
 	/* Clear the BSS. */
@@ -114,8 +111,6 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 
-	preloader_console_init();
-
 	ret = uclass_get_device_by_name(UCLASS_CLK,
 					"clock-controller@30380000",
 					&dev);
@@ -124,6 +119,7 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 
+	preloader_console_init();
 	enable_tzc380();
 
 	power_init_board();
diff --git a/board/beacon/imx8mn/spl.c b/board/beacon/imx8mn/spl.c
index f03841e5a01..e91d3fdcf5e 100644
--- a/board/beacon/imx8mn/spl.c
+++ b/board/beacon/imx8mn/spl.c
@@ -111,8 +111,6 @@ int board_early_init_f(void)
 	/* Claiming pwm pins prevents LCD flicker during startup*/
 	imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads));
 
-	init_uart_clk(1);
-
 	return 0;
 }
 
diff --git a/board/beacon/imx8mp/spl.c b/board/beacon/imx8mp/spl.c
index 30d577f7e0e..6b357d90a3f 100644
--- a/board/beacon/imx8mp/spl.c
+++ b/board/beacon/imx8mp/spl.c
@@ -112,8 +112,6 @@ void board_init_f(ulong dummy)
 
 	arch_cpu_init();
 
-	init_uart_clk(1);
-
 	ret = spl_early_init();
 	if (ret) {
 		debug("spl_init() failed: %d\n", ret);
diff --git a/board/freescale/imx93_evk/spl.c b/board/freescale/imx93_evk/spl.c
index a214c04ddad..67a10bbb05b 100644
--- a/board/freescale/imx93_evk/spl.c
+++ b/board/freescale/imx93_evk/spl.c
@@ -110,11 +110,6 @@ int power_init_board(void)
 		pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, buck_val + 0x4);
 	}
 
-	if (IS_ENABLED(CONFIG_IMX93_EVK_LPDDR4X)) {
-		/* Set VDDQ to 1.1V from buck2 */
-		pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x28);
-	}
-
 	/* set standby voltage to 0.65v */
 	if (val & PCA9450_REG_PWRCTRL_TOFF_DEB)
 		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x0);
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index aa39afa338a..70d3c35499b 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -193,6 +193,21 @@ static const struct rpi_model rpi_models_new_scheme[] = {
 		DTB_DIR "bcm2712-rpi-5-b.dtb",
 		true,
 	},
+	[0x18] = {
+		"Compute Module 5",
+		DTB_DIR "bcm2712-rpi-cm5-cm5io.dtb",
+		true,
+	},
+	[0x19] = {
+		"500",
+		DTB_DIR "bcm2712-rpi-500.dtb",
+		true,
+	},
+	[0x1A] = {
+		"Compute Module 5 Lite",
+		DTB_DIR "bcm2712-rpi-cm5l-cm5io.dtb",
+		true,
+	},
 };
 
 static const struct rpi_model rpi_models_old_scheme[] = {
@@ -579,8 +594,14 @@ void  update_fdt_from_fw(void *fdt, void *fw_fdt)
 	/* kernel address randomisation seed as provided by the firmware */
 	copy_property(fdt, fw_fdt, "/chosen", "kaslr-seed");
 
+	/* warnings from the firmware (if any) */
+	copy_property(fdt, fw_fdt, "/chosen", "user-warnings");
+
 	/* address of the PHY device as provided by the firmware  */
 	copy_property(fdt, fw_fdt, "ethernet0/mdio@e14/ethernet-phy@1", "reg");
+
+	/* Bluetooth device address as provided by the firmware */
+	copy_property(fdt, fw_fdt, "/soc/serial@7e201000/bluetooth", "local-bd-address");
 }
 
 int ft_board_setup(void *blob, struct bd_info *bd)
@@ -589,11 +610,13 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 
 	update_fdt_from_fw(blob, (void *)fw_dtb_pointer);
 
-	node = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
-	if (node < 0)
-		fdt_simplefb_add_node(blob);
-	else
-		fdt_simplefb_enable_and_mem_rsv(blob);
+	if (CONFIG_IS_ENABLED(FDT_SIMPLEFB)) {
+		node = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
+		if (node < 0)
+			fdt_simplefb_add_node(blob);
+		else
+			fdt_simplefb_enable_and_mem_rsv(blob);
+	}
 
 #ifdef CONFIG_EFI_LOADER
 	/* Reserve the spin table */
diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig
index f39e4f5dd28..9709f628f9c 100644
--- a/configs/imx8mp_beacon_defconfig
+++ b/configs/imx8mp_beacon_defconfig
@@ -86,6 +86,7 @@ CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eth1"
 CONFIG_SPL_DM=y
 CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMX8MP=y
 CONFIG_CLK_IMX8MP=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x42800000
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index 56d893e0579..d17a54fb9b3 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -60,6 +60,7 @@ config SPL_CLK_IMX8MP
 	depends on ARCH_IMX8M && SPL
 	select SPL_CLK
 	select SPL_CLK_CCF
+	select SPL_CLK_COMPOSITE_CCF
 	help
 	  This enables SPL DM/DTS support for clock driver in i.MX8MP
 
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index df9f0285e1e..a4295614016 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -35,6 +35,8 @@ static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *const periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *const periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m",
 					       "pll2_pfd0_352m", "pll2_198m", };
+static const char *const uart_sels[] = { "pll3_80m", "osc", };
+static const char *const ecspi_sels[] = { "pll3_60m", "osc", };
 
 static int imx6q_clk_probe(struct udevice *dev)
 {
@@ -78,6 +80,15 @@ static int imx6q_clk_probe(struct udevice *dev)
 	       imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1,
 			   usdhc_sels, ARRAY_SIZE(usdhc_sels)));
 
+	if (of_machine_is_compatible("fsl,imx6qp") {
+		clk_dm(IMX6QDL_CLK_UART_SEL,
+		       imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels,
+				   ARRAY_SIZE(uart_sels)));
+		clk_dm(IMX6QDL_CLK_ECSPI_SEL,
+		       imx_clk_mux("ecspi_sel",	base + 0x38, 18, 1, ecspi_sels,
+				   ARRAY_SIZE(ecspi_sels)));
+	}
+
 	clk_dm(IMX6QDL_CLK_USDHC1_PODF,
 	       imx_clk_divider("usdhc1_podf", "usdhc1_sel",
 			       base + 0x24, 11, 3));
@@ -91,8 +102,17 @@ static int imx6q_clk_probe(struct udevice *dev)
 	       imx_clk_divider("usdhc4_podf", "usdhc4_sel",
 			       base + 0x24, 22, 3));
 
-	clk_dm(IMX6QDL_CLK_ECSPI_ROOT,
-	       imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6));
+	if (of_machine_is_compatible("fsl,imx6qp") {
+		clk_dm(IMX6QDL_CLK_UART_SERIAL_PODF,
+		       imx_clk_divider("uart_serial_podf", "uart_sel", base + 0x24, 0, 6));
+		clk_dm(IMX6QDL_CLK_ECSPI_ROOT,
+		       imx_clk_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6));
+	} else {
+		clk_dm(IMX6QDL_CLK_UART_SERIAL_PODF,
+		       imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6));
+		clk_dm(IMX6QDL_CLK_ECSPI_ROOT,
+		       imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6));
+	}
 
 	clk_dm(IMX6QDL_CLK_ECSPI1,
 	       imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0));
@@ -102,6 +122,10 @@ static int imx6q_clk_probe(struct udevice *dev)
 	       imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4));
 	clk_dm(IMX6QDL_CLK_ECSPI4,
 	       imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6));
+	clk_dm(IMX6QDL_CLK_UART_IPG,
+	       imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24));
+	clk_dm(IMX6QDL_CLK_UART_SERIAL,
+	       imx_clk_gate2("uart_serial", "uart_serial_podf",  base + 0x7c, 26));
 	clk_dm(IMX6QDL_CLK_USDHC1,
 	       imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2));
 	clk_dm(IMX6QDL_CLK_USDHC2,
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index bb6958f0ec2..378c07caba3 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -81,6 +81,22 @@ static const char * const imx8mm_i2c4_sels[] = {"clock-osc-24m", "sys_pll1_160m"
 						"sys_pll3_out", "audio_pll1_out", "video_pll1_out",
 						"audio_pll2_out", "sys_pll1_133m", };
 
+static const char * const imx8mm_uart1_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_pll2_200m",
+					  "sys_pll2_100m", "sys_pll3_out", "clk_ext2", "clk_ext4",
+					  "audio_pll2_out", };
+
+static const char * const imx8mm_uart2_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_pll2_200m",
+					  "sys_pll2_100m", "sys_pll3_out", "clk_ext2", "clk_ext3",
+					  "audio_pll2_out", };
+
+static const char * const imx8mm_uart3_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_pll2_200m",
+					  "sys_pll2_100m", "sys_pll3_out", "clk_ext2", "clk_ext4",
+					  "audio_pll2_out", };
+
+static const char * const imx8mm_uart4_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_pll2_200m",
+					  "sys_pll2_100m", "sys_pll3_out", "clk_ext2", "clk_ext3",
+					  "audio_pll2_out", };
+
 #if CONFIG_IS_ENABLED(PCIE_DW_IMX)
 static const char * const imx8mm_pcie1_ctrl_sels[] = {"clock-osc-24m", "sys_pll2_250m", "sys_pll2_200m",
 						      "sys_pll1_266m", "sys_pll1_800m", "sys_pll2_500m",
@@ -322,6 +338,24 @@ static int imx8mm_clk_probe(struct udevice *dev)
 	       imx8m_clk_composite("i2c3", imx8mm_i2c3_sels, base + 0xae00));
 	clk_dm(IMX8MM_CLK_I2C4,
 	       imx8m_clk_composite("i2c4", imx8mm_i2c4_sels, base + 0xae80));
+
+	clk_dm(IMX8MM_CLK_UART1,
+	       imx8m_clk_composite("uart1", imx8mm_uart1_sels, base + 0xaf00));
+	clk_dm(IMX8MM_CLK_UART2,
+	       imx8m_clk_composite("uart2", imx8mm_uart2_sels, base + 0xaf80));
+	clk_dm(IMX8MM_CLK_UART3,
+	       imx8m_clk_composite("uart3", imx8mm_uart3_sels, base + 0xb000));
+	clk_dm(IMX8MM_CLK_UART4,
+	       imx8m_clk_composite("uart4", imx8mm_uart4_sels, base + 0xb080));
+	clk_dm(IMX8MM_CLK_UART1_ROOT,
+	       imx_clk_gate4("uart1_root_clk", "uart1", base + 0x4490, 0));
+	clk_dm(IMX8MM_CLK_UART2_ROOT,
+	       imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0));
+	clk_dm(IMX8MM_CLK_UART3_ROOT,
+	       imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0));
+	clk_dm(IMX8MM_CLK_UART4_ROOT,
+	       imx_clk_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0));
+
 	clk_dm(IMX8MM_CLK_WDOG,
 	       imx8m_clk_composite("wdog", imx8mm_wdog_sels, base + 0xb900));
 	clk_dm(IMX8MM_CLK_USDHC3,
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index be15ebd0e25..54ae887817a 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -97,6 +97,22 @@ static const char * const imx8mn_i2c4_sels[] = {"clock-osc-24m", "sys_pll1_160m"
 						"sys_pll3_out", "audio_pll1_out", "video_pll_out",
 						"audio_pll2_out", "sys_pll1_133m", };
 
+static const char * const imx8mn_uart1_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_pll2_200m",
+						 "sys_pll2_100m", "sys_pll3_out", "clk_ext2",
+						 "clk_ext4", "audio_pll2_out", };
+
+static const char * const imx8mn_uart2_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_pll2_200m",
+						 "sys_pll2_100m", "sys_pll3_out", "clk_ext2",
+						 "clk_ext3", "audio_pll2_out", };
+
+static const char * const imx8mn_uart3_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_pll2_200m",
+						 "sys_pll2_100m", "sys_pll3_out", "clk_ext2",
+						 "clk_ext4", "audio_pll2_out", };
+
+static const char * const imx8mn_uart4_sels[] = {"clock-osc-24m", "sys_pll1_80m", "sys_pll2_200m",
+						 "sys_pll2_100m", "sys_pll3_out", "clk_ext2",
+						 "clk_ext3", "audio_pll2_out", };
+
 #ifndef CONFIG_XPL_BUILD
 static const char * const imx8mn_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m",
 						"sys_pll1_40m", "sys_pll3_out", "clk_ext1",
@@ -311,6 +327,14 @@ static int imx8mn_clk_probe(struct udevice *dev)
 	       imx8m_clk_composite("i2c3", imx8mn_i2c3_sels, base + 0xae00));
 	clk_dm(IMX8MN_CLK_I2C4,
 	       imx8m_clk_composite("i2c4", imx8mn_i2c4_sels, base + 0xae80));
+	clk_dm(IMX8MN_CLK_UART1,
+	       imx8m_clk_composite("uart1", imx8mn_uart1_sels, base + 0xaf00));
+	clk_dm(IMX8MN_CLK_UART2,
+	       imx8m_clk_composite("uart2", imx8mn_uart2_sels, base + 0xaf80));
+	clk_dm(IMX8MN_CLK_UART3,
+	       imx8m_clk_composite("uart3", imx8mn_uart3_sels, base + 0xb000));
+	clk_dm(IMX8MN_CLK_UART4,
+	       imx8m_clk_composite("uart4", imx8mn_uart4_sels, base + 0xb080));
 	clk_dm(IMX8MN_CLK_WDOG,
 	       imx8m_clk_composite("wdog", imx8mn_wdog_sels, base + 0xb900));
 	clk_dm(IMX8MN_CLK_USDHC3,
@@ -355,6 +379,14 @@ static int imx8mn_clk_probe(struct udevice *dev)
 	       imx_clk_gate2_shared2("nand_usdhc_rawnand_clk",
 				     "nand_usdhc_bus", base + 0x4300, 0,
 				     &share_count_nand));
+	clk_dm(IMX8MN_CLK_UART1_ROOT,
+	       imx_clk_gate4("uart1_root_clk", "uart1", base + 0x4490, 0));
+	clk_dm(IMX8MN_CLK_UART2_ROOT,
+	       imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0));
+	clk_dm(IMX8MN_CLK_UART3_ROOT,
+	       imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0));
+	clk_dm(IMX8MN_CLK_UART4_ROOT,
+	       imx_clk_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0));
 	clk_dm(IMX8MN_CLK_USB1_CTRL_ROOT,
 		imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));
 
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index c5fd740be4d..28f4435d01d 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -3,6 +3,7 @@
  * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
  */
 
+#include <clk.h>
 #include <dm.h>
 #include <errno.h>
 #include <watchdog.h>
@@ -312,7 +313,17 @@ int mxc_serial_setbrg(struct udevice *dev, int baudrate)
 static int mxc_serial_probe(struct udevice *dev)
 {
 	struct mxc_serial_plat *plat = dev_get_plat(dev);
+#if CONFIG_IS_ENABLED(CLK_CCF)
+	int ret;
 
+	ret = clk_get_bulk(dev, &plat->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_enable_bulk(&plat->clks);
+	if (ret)
+		return ret;
+#endif
 	_mxc_serial_init(plat->reg, plat->use_dte);
 
 	return 0;
diff --git a/include/dm/platform_data/serial_mxc.h b/include/dm/platform_data/serial_mxc.h
index cc59eeb1dd1..52657aa3deb 100644
--- a/include/dm/platform_data/serial_mxc.h
+++ b/include/dm/platform_data/serial_mxc.h
@@ -9,6 +9,9 @@
 /* Information about a serial port */
 struct mxc_serial_plat {
 	struct mxc_uart *reg;  /* address of registers in physical memory */
+#if CONFIG_IS_ENABLED(CLK_CCF)
+	struct clk_bulk clks;
+#endif
 	bool use_dte;
 };