Can't get deCONZ frontend to show anything

[gr0ebi]

Hi,

I tried multiple setups with Domoticz and the deCONZ plugin but I'm not able to get anything shown on the deCONZ frontend of the plugin for weeks

Original Setup:
Domoticz running on Debian13 on a proxmox VM on VLAN 1 (with and without reverseproxy)
deCONZ with a ConBee II running Raspbian on a Raspberry Pi 4 on VLAN 2

I was able to see and use my remote switches in Setup->Devices after adding the deCONZ plugin via Setup->Hardware with generated API key
Frontend empty, showing "Loading..." forever

Purged everything, created a new setup:
Domoticz running on Ubuntu on a proxmox VM on VLAN 1 (with and without reverseproxy)
deCONZ with a ConBee II running PiOS on a Raspberry Pi 4 on VLAN 1

Again, everything working but the deCONZ site stays on "Loading..."

When clicking on the site, I get the following error in the browser console:
`XHR GET http://10.20.0.15/api/EAEEFF2B12/lights/

Blocked loading mixed active content "http://10.20.0.15/api/EAEEFF2B12/lights/"

Possibly unhandled rejection: {"data":null,"status":-1,"config":{"method":"GET","transformRequest":[null],"transformResponse":[null],"jsonpCallbackParam":"callback","url":"http://10.20.0.15:80/api/EAEEFF2B12/lights/","headers":{"Accept":"application/json, text/plain, /"}},"statusText":"","xhrStatus":"error"}
`

Even on the same VLAN without any routing or firewall inbetween it won't show anything but "Loading..."
No errors shown in the domoticz log file

Any help much appreciated

[gr0ebi]

OK I just tested with Chrome Browser and its working so it looks like it's a issue with Firefox

[Smanar]

Hello, perhaps something to see with #82 ?
And you haven't same setting on Firefox and Chrome ? Can try too in private mode (Firefox put so much thing in cache)

[gr0ebi]

with Firefox private window no change

I think you are right, it looks like Firefox is stopping the http connection since everything else is https

[Smanar]

Yep, by security it's not possible to open an http connexion inside an https one.
On my side I use an http connexion for domoticz, it's possible to configure deconz to use https, but you need a recent version and there is less problem with old one.

There is a setting in browser too, but need to be sure it's enabled only for the domoticz connection.

[gr0ebi]

Thanks a lot for clarifying
I will need to review my options since I have HAproxy in front of domoticz to access it from WAN
I think the issue can be closed since it's not related to your plugin

[Smanar]

Sure.
But there is 4 ways to explore

• Use http for Domoticz
• Use Https for Deconz
• lower the browser security to support http in https
• Don't use the Deconz front end in domoticz, all the rest is working without problem, On my side I rarely use it.