diff --git a/index.html b/index.html
index 2fe34f54..ce0e3160 100644
--- a/index.html
+++ b/index.html
@@ -34,7 +34,7 @@
   "@type": "ItemList",
   "name": "Polymaker filament presets",
   "description": "Official Polymaker 3D printing filament presets by material, printer, and slicer for Bambu Studio, OrcaSlicer, ElegooSlicer, and PrusaSlicer.",
-  "numberOfItems": 613,
+  "numberOfItems": 622,
   "itemListElement": [
     {
       "@type": "ListItem",
@@ -7601,7 +7601,7 @@
       "position": 541,
       "item": {
         "@type": "Product",
-        "name": "Polymaker Polymaker ABS Max filament preset for Bambu Lab P1S (Bambu Studio)",
+        "name": "Polymaker Polymaker ABS Max filament preset for Bambu Lab H2S (Bambu Studio)",
         "brand": {
           "@type": "Brand",
           "name": "Polymaker"
@@ -7613,6 +7613,34 @@
     {
       "@type": "ListItem",
       "position": 542,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Max filament preset for Bambu Lab P1S (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Max",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 543,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Pro filament preset for Bambu Lab H2C (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Pro",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 544,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker ABS Pro filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -7626,7 +7654,63 @@
     },
     {
       "@type": "ListItem",
-      "position": 543,
+      "position": 545,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Pro filament preset for Bambu Lab P1S (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Pro",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 546,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Pro filament preset for Bambu Lab P2S (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Pro",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 547,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Pro filament preset for Bambu Lab X2D (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Pro",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 548,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Pro Galaxy filament preset for Bambu Lab H2C (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Pro Galaxy",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 549,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker ABS Pro Galaxy filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -7640,7 +7724,49 @@
     },
     {
       "@type": "ListItem",
-      "position": 544,
+      "position": 550,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Pro Galaxy filament preset for Bambu Lab P1S (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Pro Galaxy",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 551,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Pro Galaxy filament preset for Bambu Lab P2S (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Pro Galaxy",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 552,
+      "item": {
+        "@type": "Product",
+        "name": "Polymaker Polymaker ABS Pro Galaxy filament preset for Bambu Lab X2D (Bambu Studio)",
+        "brand": {
+          "@type": "Brand",
+          "name": "Polymaker"
+        },
+        "category": "Polymaker ABS Pro Galaxy",
+        "url": "https://presets.polymaker.com/"
+      }
+    },
+    {
+      "@type": "ListItem",
+      "position": 553,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker ASA filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -7654,7 +7780,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 545,
+      "position": 554,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker ASA filament preset for Bambu Lab P2S (Bambu Studio)",
@@ -7668,7 +7794,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 546,
+      "position": 555,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker ASA filament preset for Bambu Lab X2D (Bambu Studio)",
@@ -7682,7 +7808,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 547,
+      "position": 556,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Bambu Lab H2C (Bambu Studio)",
@@ -7696,7 +7822,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 548,
+      "position": 557,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -7710,7 +7836,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 549,
+      "position": 558,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Bambu Lab H2S (Bambu Studio)",
@@ -7724,7 +7850,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 550,
+      "position": 559,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Bambu Lab P1S (Bambu Studio)",
@@ -7738,7 +7864,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 551,
+      "position": 560,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Bambu Lab P2S (Bambu Studio)",
@@ -7752,7 +7878,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 552,
+      "position": 561,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Bambu Lab X2D (Bambu Studio)",
@@ -7766,7 +7892,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 553,
+      "position": 562,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Elegoo Centauri Carbon 2 (ElegooSlicer)",
@@ -7780,7 +7906,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 554,
+      "position": 563,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Prusa Core One (PrusaSlicer)",
@@ -7794,7 +7920,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 555,
+      "position": 564,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA filament preset for Snapmaker U1 (OrcaSlicer)",
@@ -7808,7 +7934,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 556,
+      "position": 565,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA-GF filament preset for Bambu Lab H2C (Bambu Studio)",
@@ -7822,7 +7948,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 557,
+      "position": 566,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA-GF filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -7836,7 +7962,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 558,
+      "position": 567,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA-GF filament preset for Bambu Lab H2S (Bambu Studio)",
@@ -7850,7 +7976,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 559,
+      "position": 568,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA-GF filament preset for Bambu Lab P2S (Bambu Studio)",
@@ -7864,7 +7990,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 560,
+      "position": 569,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA-GF filament preset for Bambu Lab X2D (Bambu Studio)",
@@ -7878,7 +8004,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 561,
+      "position": 570,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA-GF filament preset for Elegoo Centauri Carbon 2 (ElegooSlicer)",
@@ -7892,7 +8018,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 562,
+      "position": 571,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA-GF filament preset for Prusa Core One (PrusaSlicer)",
@@ -7906,7 +8032,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 563,
+      "position": 572,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker HT-PLA-GF filament preset for Snapmaker U1 (OrcaSlicer)",
@@ -7920,7 +8046,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 564,
+      "position": 573,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Bambu Lab A1 (Bambu Studio)",
@@ -7934,7 +8060,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 565,
+      "position": 574,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Bambu Lab H2C (Bambu Studio)",
@@ -7948,7 +8074,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 566,
+      "position": 575,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -7962,7 +8088,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 567,
+      "position": 576,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Bambu Lab H2S (Bambu Studio)",
@@ -7976,7 +8102,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 568,
+      "position": 577,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Bambu Lab P1S (Bambu Studio)",
@@ -7990,7 +8116,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 569,
+      "position": 578,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Bambu Lab P2S (Bambu Studio)",
@@ -8004,7 +8130,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 570,
+      "position": 579,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Bambu Lab X2D (Bambu Studio)",
@@ -8018,7 +8144,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 571,
+      "position": 580,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Elegoo Centauri Carbon 2 (ElegooSlicer)",
@@ -8032,7 +8158,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 572,
+      "position": 581,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Prusa Core One (PrusaSlicer)",
@@ -8046,7 +8172,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 573,
+      "position": 582,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG filament preset for Snapmaker U1 (OrcaSlicer)",
@@ -8060,7 +8186,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 574,
+      "position": 583,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Bambu Lab A1 (Bambu Studio)",
@@ -8074,7 +8200,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 575,
+      "position": 584,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Bambu Lab H2C (Bambu Studio)",
@@ -8088,7 +8214,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 576,
+      "position": 585,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -8102,7 +8228,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 577,
+      "position": 586,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Bambu Lab H2S (Bambu Studio)",
@@ -8116,7 +8242,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 578,
+      "position": 587,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Bambu Lab P1S (Bambu Studio)",
@@ -8130,7 +8256,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 579,
+      "position": 588,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Bambu Lab P2S (Bambu Studio)",
@@ -8144,7 +8270,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 580,
+      "position": 589,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Bambu Lab X2D (Bambu Studio)",
@@ -8158,7 +8284,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 581,
+      "position": 590,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Elegoo Centauri Carbon 2 (ElegooSlicer)",
@@ -8172,7 +8298,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 582,
+      "position": 591,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Prusa Core One (PrusaSlicer)",
@@ -8186,7 +8312,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 583,
+      "position": 592,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PETG Galaxy filament preset for Snapmaker U1 (OrcaSlicer)",
@@ -8200,7 +8326,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 584,
+      "position": 593,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA filament preset for Bambu Lab H2C (Bambu Studio)",
@@ -8214,7 +8340,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 585,
+      "position": 594,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -8228,7 +8354,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 586,
+      "position": 595,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA filament preset for Bambu Lab H2S (Bambu Studio)",
@@ -8242,7 +8368,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 587,
+      "position": 596,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA filament preset for Bambu Lab P2S (Bambu Studio)",
@@ -8256,7 +8382,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 588,
+      "position": 597,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA filament preset for Bambu Lab X2D (Bambu Studio)",
@@ -8270,7 +8396,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 589,
+      "position": 598,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA filament preset for Elegoo Centauri Carbon 2 (ElegooSlicer)",
@@ -8284,7 +8410,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 590,
+      "position": 599,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA filament preset for Prusa Core One (PrusaSlicer)",
@@ -8298,7 +8424,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 591,
+      "position": 600,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA filament preset for Snapmaker U1 (OrcaSlicer)",
@@ -8312,7 +8438,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 592,
+      "position": 601,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Anycubic Kobra S1 (OrcaSlicer)",
@@ -8326,7 +8452,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 593,
+      "position": 602,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Bambu Lab A1 (Bambu Studio)",
@@ -8340,7 +8466,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 594,
+      "position": 603,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Bambu Lab H2C (Bambu Studio)",
@@ -8354,7 +8480,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 595,
+      "position": 604,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -8368,7 +8494,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 596,
+      "position": 605,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Bambu Lab H2S (Bambu Studio)",
@@ -8382,7 +8508,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 597,
+      "position": 606,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Bambu Lab P1S (Bambu Studio)",
@@ -8396,7 +8522,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 598,
+      "position": 607,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Bambu Lab P2S (Bambu Studio)",
@@ -8410,7 +8536,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 599,
+      "position": 608,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Bambu Lab X2D (Bambu Studio)",
@@ -8424,7 +8550,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 600,
+      "position": 609,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Elegoo Centauri Carbon 2 (ElegooSlicer)",
@@ -8438,7 +8564,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 601,
+      "position": 610,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Prusa Core One (PrusaSlicer)",
@@ -8452,7 +8578,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 602,
+      "position": 611,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro filament preset for Snapmaker U1 (OrcaSlicer)",
@@ -8466,7 +8592,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 603,
+      "position": 612,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Anycubic Kobra S1 (OrcaSlicer)",
@@ -8480,7 +8606,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 604,
+      "position": 613,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Bambu Lab A1 (Bambu Studio)",
@@ -8494,7 +8620,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 605,
+      "position": 614,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Bambu Lab H2C (Bambu Studio)",
@@ -8508,7 +8634,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 606,
+      "position": 615,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Bambu Lab H2D (Bambu Studio)",
@@ -8522,7 +8648,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 607,
+      "position": 616,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Bambu Lab H2S (Bambu Studio)",
@@ -8536,7 +8662,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 608,
+      "position": 617,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Bambu Lab P1S (Bambu Studio)",
@@ -8550,7 +8676,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 609,
+      "position": 618,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Bambu Lab P2S (Bambu Studio)",
@@ -8564,7 +8690,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 610,
+      "position": 619,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Bambu Lab X2D (Bambu Studio)",
@@ -8578,7 +8704,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 611,
+      "position": 620,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Elegoo Centauri Carbon 2 (ElegooSlicer)",
@@ -8592,7 +8718,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 612,
+      "position": 621,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Prusa Core One (PrusaSlicer)",
@@ -8606,7 +8732,7 @@
     },
     {
       "@type": "ListItem",
-      "position": 613,
+      "position": 622,
       "item": {
         "@type": "Product",
         "name": "Polymaker Polymaker PLA Pro Metallic filament preset for Snapmaker U1 (OrcaSlicer)",
@@ -8861,7 +8987,7 @@ <h2 class="known-issues-title" data-i18n="issues.title">Known Issues</h2>
     <noscript>
     <section class="card seo-content" id="about-presets" aria-labelledby="about-presets-title">
       <h2 id="about-presets-title" class="seo-content-title">Polymaker filament presets for Bambu Studio, OrcaSlicer, ElegooSlicer &amp; PrusaSlicer</h2>
-      <p>Download free, official Polymaker print profiles and 3D printing filament presets. This page provides 613 ready-to-use presets covering 66 Polymaker materials, tuned for Bambu Studio, ElegooSlicer, OrcaSlicer, PrusaSlicer. Each preset sets the recommended nozzle and bed temperature, flow rate, cooling, and other parameters so your Polymaker filament prints correctly on the first try.</p>
+      <p>Download free, official Polymaker print profiles and 3D printing filament presets. This page provides 622 ready-to-use presets covering 66 Polymaker materials, tuned for Bambu Studio, ElegooSlicer, OrcaSlicer, PrusaSlicer. Each preset sets the recommended nozzle and bed temperature, flow rate, cooling, and other parameters so your Polymaker filament prints correctly on the first try.</p>
       <p>Presets are organized by slicer, material, printer brand, and printer model. Whether you need a PolyLite PETG preset for the Bambu Lab X1 Carbon, a Fiberon ASA-CF preset for Bambu Studio, or a PolyTerra PLA profile for OrcaSlicer, use the filters above to download the exact preset file for your printer.</p>
 
       <h3 class="seo-section-title">Materials with presets</h3>
diff --git a/index.json b/index.json
index 15cb9727..09fa87b1 100644
--- a/index.json
+++ b/index.json
@@ -1,6 +1,6 @@
 {
   "version": "1.0",
-  "updatedAt": "2026-06-04T07:50:43.368Z",
+  "updatedAt": "2026-06-05T07:10:28.660Z",
   "materials": [
     "Fiberon ASA-CF08",
     "Fiberon PA12-CF10",
@@ -371,7 +371,7 @@
       "slicer": "ElegooSlicer",
       "path": "preset/Fiberon PA12-CF10/Elegoo/CC2/ElegooSlicer/Fiberon PA12-CF10 @Elegoo CC2.json",
       "filename": "Fiberon PA12-CF10 @Elegoo CC2.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "Elegoo",
@@ -451,7 +451,7 @@
       "slicer": "BambuStudio",
       "path": "preset/Fiberon PA6-CF20/BBL/H2S/BambuStudio/Fiberon PA6-CF20 @BBL H2S.json",
       "filename": "Fiberon PA6-CF20 @BBL H2S.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "BBL",
@@ -957,7 +957,7 @@
       "slicer": "BambuStudio",
       "path": "preset/Fiberon PA612-ESD/BBL/H2D/BambuStudio/Fiberon PA612-ESD @BBL H2D.json",
       "filename": "Fiberon PA612-ESD @BBL H2D.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "BBL",
@@ -1275,7 +1275,7 @@
       "slicer": "BambuStudio",
       "path": "preset/Fiberon PET-GF15/BBL/P2S/BambuStudio/Fiberon PET-GF15 @BBL P2S.json",
       "filename": "Fiberon PET-GF15 @BBL P2S.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "BBL",
@@ -1291,7 +1291,7 @@
       "slicer": "BambuStudio",
       "path": "preset/Fiberon PET-GF15/BBL/X2D/BambuStudio/Fiberon PET-GF15 @BBL X2D.json",
       "filename": "Fiberon PET-GF15 @BBL X2D.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "BBL",
@@ -1323,7 +1323,7 @@
       "slicer": "OrcaSlicer",
       "path": "preset/Fiberon PET-GF15/Snapmaker/U1/OrcaSlicer/Fiberon PET-GF15 @Snapmaker U1.json",
       "filename": "Fiberon PET-GF15 @Snapmaker U1.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "Snapmaker",
@@ -1719,7 +1719,7 @@
       "slicer": "OrcaSlicer",
       "path": "preset/Fiberon PPS-GF20/Snapmaker/U1/OrcaSlicer/Fiberon PPS-GF20 @Snapmaker U1.json",
       "filename": "Fiberon PPS-GF20 @Snapmaker U1.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "Snapmaker",
@@ -10091,7 +10091,7 @@
       "slicer": "BambuStudio",
       "path": "preset/Polymaker ABS Max/BBL/H2D/BambuStudio/Polymaker ABS Max @BBL H2D.json",
       "filename": "Polymaker ABS Max @BBL H2D.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "BBL",
@@ -10100,6 +10100,22 @@
         }
       ]
     },
+    {
+      "material": "Polymaker ABS Max",
+      "brand": "BBL",
+      "model": "H2S",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Max/BBL/H2S/BambuStudio/Polymaker ABS Max @BBL H2S.json",
+      "filename": "Polymaker ABS Max @BBL H2S.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "H2S",
+          "fullName": "Bambu Lab H2S 0.4 nozzle"
+        }
+      ]
+    },
     {
       "material": "Polymaker ABS Max",
       "brand": "BBL",
@@ -10107,7 +10123,7 @@
       "slicer": "BambuStudio",
       "path": "preset/Polymaker ABS Max/BBL/P1S/BambuStudio/Polymaker ABS Max @BBL P1S.json",
       "filename": "Polymaker ABS Max @BBL P1S.json",
-      "updatedAt": "2026-06-04T15:49:59+08:00",
+      "updatedAt": "2026-06-05T14:24:44+08:00",
       "compatiblePrinters": [
         {
           "brand": "BBL",
@@ -10131,6 +10147,22 @@
         }
       ]
     },
+    {
+      "material": "Polymaker ABS Pro",
+      "brand": "BBL",
+      "model": "H2C",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Pro/BBL/H2C/BambuStudio/Polymaker ABS Pro @BBL H2C.json",
+      "filename": "Polymaker ABS Pro @BBL H2C.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "H2C",
+          "fullName": "Bambu Lab H2C 0.4 nozzle"
+        }
+      ]
+    },
     {
       "material": "Polymaker ABS Pro",
       "brand": "BBL",
@@ -10147,6 +10179,85 @@
         }
       ]
     },
+    {
+      "material": "Polymaker ABS Pro",
+      "brand": "BBL",
+      "model": "P1S",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Pro/BBL/P1S/BambuStudio/Polymaker ABS Pro @BBL P1S.json",
+      "filename": "Polymaker ABS Pro @BBL P1S.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "P1S",
+          "fullName": "Bambu Lab P1S 0.4 nozzle"
+        },
+        {
+          "brand": "BBL",
+          "model": "X1C",
+          "fullName": "Bambu Lab X1C 0.4 nozzle"
+        },
+        {
+          "brand": "BBL",
+          "model": "X1",
+          "fullName": "Bambu Lab X1 0.4 nozzle"
+        },
+        {
+          "brand": "BBL",
+          "model": "X1E",
+          "fullName": "Bambu Lab X1E 0.4 nozzle"
+        }
+      ]
+    },
+    {
+      "material": "Polymaker ABS Pro",
+      "brand": "BBL",
+      "model": "P2S",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Pro/BBL/P2S/BambuStudio/Polymaker ABS Pro @BBL P2S.json",
+      "filename": "Polymaker ABS Pro @BBL P2S.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "P2S",
+          "fullName": "Bambu Lab P2S 0.4 nozzle"
+        }
+      ]
+    },
+    {
+      "material": "Polymaker ABS Pro",
+      "brand": "BBL",
+      "model": "X2D",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Pro/BBL/X2D/BambuStudio/Polymaker ABS Pro @BBL X2D.json",
+      "filename": "Polymaker ABS Pro @BBL X2D.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "X2D",
+          "fullName": "Bambu Lab X2D 0.4 nozzle"
+        }
+      ]
+    },
+    {
+      "material": "Polymaker ABS Pro Galaxy",
+      "brand": "BBL",
+      "model": "H2C",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Pro Galaxy/BBL/H2C/BambuStudio/Polymaker ABS Pro Galaxy @BBL H2C.json",
+      "filename": "Polymaker ABS Pro Galaxy @BBL H2C.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "H2C",
+          "fullName": "Bambu Lab H2C 0.4 nozzle"
+        }
+      ]
+    },
     {
       "material": "Polymaker ABS Pro Galaxy",
       "brand": "BBL",
@@ -10163,6 +10274,69 @@
         }
       ]
     },
+    {
+      "material": "Polymaker ABS Pro Galaxy",
+      "brand": "BBL",
+      "model": "P1S",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Pro Galaxy/BBL/P1S/BambuStudio/Polymaker ABS Pro Galaxy @BBL P1S.json",
+      "filename": "Polymaker ABS Pro Galaxy @BBL P1S.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "P1S",
+          "fullName": "Bambu Lab P1S 0.4 nozzle"
+        },
+        {
+          "brand": "BBL",
+          "model": "X1C",
+          "fullName": "Bambu Lab X1C 0.4 nozzle"
+        },
+        {
+          "brand": "BBL",
+          "model": "X1",
+          "fullName": "Bambu Lab X1 0.4 nozzle"
+        },
+        {
+          "brand": "BBL",
+          "model": "X1E",
+          "fullName": "Bambu Lab X1E 0.4 nozzle"
+        }
+      ]
+    },
+    {
+      "material": "Polymaker ABS Pro Galaxy",
+      "brand": "BBL",
+      "model": "P2S",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Pro Galaxy/BBL/P2S/BambuStudio/Polymaker ABS Pro Galaxy @BBL P2S.json",
+      "filename": "Polymaker ABS Pro Galaxy @BBL P2S.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "P2S",
+          "fullName": "Bambu Lab P2S 0.4 nozzle"
+        }
+      ]
+    },
+    {
+      "material": "Polymaker ABS Pro Galaxy",
+      "brand": "BBL",
+      "model": "X2D",
+      "slicer": "BambuStudio",
+      "path": "preset/Polymaker ABS Pro Galaxy/BBL/X2D/BambuStudio/Polymaker ABS Pro Galaxy @BBL X2D.json",
+      "filename": "Polymaker ABS Pro Galaxy @BBL X2D.json",
+      "updatedAt": "2026-06-05T15:01:19+08:00",
+      "compatiblePrinters": [
+        {
+          "brand": "BBL",
+          "model": "X2D",
+          "fullName": "Bambu Lab X2D 0.4 nozzle"
+        }
+      ]
+    },
     {
       "material": "Polymaker ASA",
       "brand": "BBL",
diff --git a/preset/Polymaker ABS Max/BBL/H2S/BambuStudio/Polymaker ABS Max @BBL H2S.json b/preset/Polymaker ABS Max/BBL/H2S/BambuStudio/Polymaker ABS Max @BBL H2S.json
new file mode 100644
index 00000000..6d404451
--- /dev/null
+++ b/preset/Polymaker ABS Max/BBL/H2S/BambuStudio/Polymaker ABS Max @BBL H2S.json	
@@ -0,0 +1,388 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Max @BBL H2S",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "60"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "90"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "90"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_preheat_temperature_delta": [
+        "0"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_flow_ratio": [
+        "0.92",
+        "nil"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "8",
+        "nil"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0"
+    ],
+    "filament_prime_volume": [
+        "45"
+    ],
+    "filament_prime_volume_nc": [
+        "60"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Max @BBL H2S"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "10"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "260",
+        "nil"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "127.4"
+    ],
+    "textured_plate_temp": [
+        "110"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "110"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n\n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB02",
+    "description": " ",
+    "setting_id": "GFSB99_21",
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "version": "2.7.0.7",
+    "idle_temperature": 0
+}
\ No newline at end of file
diff --git a/preset/Polymaker ABS Pro Galaxy/BBL/H2C/BambuStudio/Polymaker ABS Pro Galaxy @BBL H2C.json b/preset/Polymaker ABS Pro Galaxy/BBL/H2C/BambuStudio/Polymaker ABS Pro Galaxy @BBL H2C.json
new file mode 100644
index 00000000..682ab134
--- /dev/null
+++ b/preset/Polymaker ABS Pro Galaxy/BBL/H2C/BambuStudio/Polymaker ABS Pro Galaxy @BBL H2C.json	
@@ -0,0 +1,395 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Pro Galaxy @BBL H2C",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "60"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "90"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "90"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_flow_ratio": [
+        "1.04",
+        "nil"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "8",
+        "nil"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Pro Galaxy @BBL H2C"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "nil"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "112"
+    ],
+    "textured_plate_temp": [
+        "110"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "110"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB03",
+    "description": " ",
+    "setting_id": "GFSB99_16",
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "version": "2.7.0.7",
+    "idle_temperature": 0
+}
\ No newline at end of file
diff --git a/preset/Polymaker ABS Pro Galaxy/BBL/P1S/BambuStudio/Polymaker ABS Pro Galaxy @BBL P1S.json b/preset/Polymaker ABS Pro Galaxy/BBL/P1S/BambuStudio/Polymaker ABS Pro Galaxy @BBL P1S.json
new file mode 100644
index 00000000..7db84580
--- /dev/null
+++ b/preset/Polymaker ABS Pro Galaxy/BBL/P1S/BambuStudio/Polymaker ABS Pro Galaxy @BBL P1S.json	
@@ -0,0 +1,365 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Pro Galaxy @BBL P1S",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "0"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "0"
+    ],
+    "filament_preheat_temperature_delta": [
+        "0"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "200"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0"
+    ],
+    "filament_prime_volume": [
+        "45"
+    ],
+    "filament_prime_volume_nc": [
+        "60"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Pro Galaxy @BBL P1S"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "10"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "112"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab X1C 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1E 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n\n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB03",
+    "description": " ",
+    "setting_id": "GFSB99",
+    "version": "2.6.0.5",
+    "idle_temperature": 0
+}
\ No newline at end of file
diff --git a/preset/Polymaker ABS Pro Galaxy/BBL/P2S/BambuStudio/Polymaker ABS Pro Galaxy @BBL P2S.json b/preset/Polymaker ABS Pro Galaxy/BBL/P2S/BambuStudio/Polymaker ABS Pro Galaxy @BBL P2S.json
new file mode 100644
index 00000000..3cfcf99a
--- /dev/null
+++ b/preset/Polymaker ABS Pro Galaxy/BBL/P2S/BambuStudio/Polymaker ABS Pro Galaxy @BBL P2S.json	
@@ -0,0 +1,372 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Pro Galaxy @BBL P2S",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "60"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_preheat_temperature_delta": [
+        "0"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_flow_ratio": [
+        "0.93",
+        "nil"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "nil"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0"
+    ],
+    "filament_prime_volume": [
+        "45"
+    ],
+    "filament_prime_volume_nc": [
+        "60"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Pro Galaxy @BBL P2S"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "10"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "280",
+        "nil"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280",
+        "nil"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "112"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n\n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB03",
+    "description": " ",
+    "setting_id": "GFSB99_09",
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "version": "2.6.0.5",
+    "idle_temperature": 0
+}
\ No newline at end of file
diff --git a/preset/Polymaker ABS Pro Galaxy/BBL/X2D/BambuStudio/Polymaker ABS Pro Galaxy @BBL X2D.json b/preset/Polymaker ABS Pro Galaxy/BBL/X2D/BambuStudio/Polymaker ABS Pro Galaxy @BBL X2D.json
new file mode 100644
index 00000000..f1782960
--- /dev/null
+++ b/preset/Polymaker ABS Pro Galaxy/BBL/X2D/BambuStudio/Polymaker ABS Pro Galaxy @BBL X2D.json	
@@ -0,0 +1,389 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Pro Galaxy @BBL X2D",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "60"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_preheat_temperature_delta": [
+        "0"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow",
+        "Bowden Standard",
+        "Bowden High Flow"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0"
+    ],
+    "filament_prime_volume": [
+        "45"
+    ],
+    "filament_prime_volume_nc": [
+        "60"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Pro Galaxy @BBL X2D"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "10"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "280",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "112"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n\n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB03",
+    "description": " ",
+    "setting_id": "GFSB99_13",
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
+    "version": "2.6.0.5",
+    "idle_temperature": 0
+}
\ No newline at end of file
diff --git a/preset/Polymaker ABS Pro/BBL/H2C/BambuStudio/Polymaker ABS Pro @BBL H2C.json b/preset/Polymaker ABS Pro/BBL/H2C/BambuStudio/Polymaker ABS Pro @BBL H2C.json
new file mode 100644
index 00000000..54eaf771
--- /dev/null
+++ b/preset/Polymaker ABS Pro/BBL/H2C/BambuStudio/Polymaker ABS Pro @BBL H2C.json	
@@ -0,0 +1,395 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Pro @BBL H2C",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "60"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "90"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "90"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_flow_ratio": [
+        "1.04",
+        "nil"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "8",
+        "nil"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Pro @BBL H2C"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "nil"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "112"
+    ],
+    "textured_plate_temp": [
+        "110"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "110"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB04",
+    "description": " ",
+    "setting_id": "GFSB99_16",
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "version": "2.7.0.7",
+    "idle_temperature": 0
+}
\ No newline at end of file
diff --git a/preset/Polymaker ABS Pro/BBL/P1S/BambuStudio/Polymaker ABS Pro @BBL P1S.json b/preset/Polymaker ABS Pro/BBL/P1S/BambuStudio/Polymaker ABS Pro @BBL P1S.json
new file mode 100644
index 00000000..6f154f64
--- /dev/null
+++ b/preset/Polymaker ABS Pro/BBL/P1S/BambuStudio/Polymaker ABS Pro @BBL P1S.json	
@@ -0,0 +1,365 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Pro @BBL P1S",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "0"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "0"
+    ],
+    "filament_preheat_temperature_delta": [
+        "0"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "200"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0"
+    ],
+    "filament_prime_volume": [
+        "45"
+    ],
+    "filament_prime_volume_nc": [
+        "60"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Pro @BBL P1S"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "10"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "112"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab X1C 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1E 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n\n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB04",
+    "description": " ",
+    "setting_id": "GFSB99",
+    "version": "2.6.0.5",
+    "idle_temperature": 0
+}
\ No newline at end of file
diff --git a/preset/Polymaker ABS Pro/BBL/P2S/BambuStudio/Polymaker ABS Pro @BBL P2S.json b/preset/Polymaker ABS Pro/BBL/P2S/BambuStudio/Polymaker ABS Pro @BBL P2S.json
new file mode 100644
index 00000000..8c720041
--- /dev/null
+++ b/preset/Polymaker ABS Pro/BBL/P2S/BambuStudio/Polymaker ABS Pro @BBL P2S.json	
@@ -0,0 +1,372 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Pro @BBL P2S",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "60"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_preheat_temperature_delta": [
+        "0"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_flow_ratio": [
+        "0.93",
+        "nil"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "nil"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0"
+    ],
+    "filament_prime_volume": [
+        "45"
+    ],
+    "filament_prime_volume_nc": [
+        "60"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Pro @BBL P2S"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "10"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "280",
+        "nil"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280",
+        "nil"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "112"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n\n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB04",
+    "description": " ",
+    "setting_id": "GFSB99_09",
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "version": "2.6.0.5",
+    "idle_temperature": 0
+}
\ No newline at end of file
diff --git a/preset/Polymaker ABS Pro/BBL/X2D/BambuStudio/Polymaker ABS Pro @BBL X2D.json b/preset/Polymaker ABS Pro/BBL/X2D/BambuStudio/Polymaker ABS Pro @BBL X2D.json
new file mode 100644
index 00000000..eb1f2e8e
--- /dev/null
+++ b/preset/Polymaker ABS Pro/BBL/X2D/BambuStudio/Polymaker ABS Pro @BBL X2D.json	
@@ -0,0 +1,389 @@
+{
+    "type": "filament",
+    "name": "Polymaker ABS Pro @BBL X2D",
+    "from": "User",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "60"
+    ],
+    "circle_compensation_speed": [
+        "200"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "close_additional_fan_first_x_layers": [
+        "3"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "counter_coef_1": [
+        "0"
+    ],
+    "counter_coef_2": [
+        "0.008"
+    ],
+    "counter_coef_3": [
+        "-0.041"
+    ],
+    "counter_limit_max": [
+        "0.033"
+    ],
+    "counter_limit_min": [
+        "-0.035"
+    ],
+    "diameter_limit": [
+        "50"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "100"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_adaptive_volumetric_speed": [
+        "0"
+    ],
+    "filament_extruder_compatibility": [
+        "0"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_preheat_temperature_delta": [
+        "0"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+        "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+        "0"
+    ],
+    "filament_tower_ironing_area": [
+        "4"
+    ],
+    "filament_tower_interface_purge_volume": [
+        "20"
+    ],
+    "filament_tower_interface_print_temp": [
+        "-1"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_dev_ams_drying_ams_limitations": [
+        "1"
+    ],
+    "filament_dev_ams_drying_heat_distortion_temperature": [
+        "90"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "75"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_dev_chamber_drying_bed_temperature": [
+        "90.0"
+    ],
+    "filament_dev_chamber_drying_time": [
+        "12.0"
+    ],
+    "filament_dev_drying_cooling_temperature": [
+        "75"
+    ],
+    "filament_dev_drying_softening_temperature": [
+        "80"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow",
+        "Bowden Standard",
+        "Bowden High Flow"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_flush_temp": [
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_metal_stickiness": [
+        "None"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_pre_cooling_temperature": [
+        "0"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "0"
+    ],
+    "filament_prime_volume": [
+        "45"
+    ],
+    "filament_prime_volume_nc": [
+        "60"
+    ],
+    "filament_printable": [
+        "3"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "0"
+    ],
+    "filament_ramming_volumetric_speed": [
+        "-1"
+    ],
+    "filament_ramming_volumetric_speed_nc": [
+        "-1"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_settings_id": [
+        "Polymaker ABS Pro @BBL X2D"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "additional_fan_full_speed_layer": [
+        "0"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retract_length_nc": [
+        "14"
+    ],
+    "filament_enable_overhang_speed": [
+        "1"
+    ],
+    "filament_overhang_1_4_speed": [
+        "0"
+    ],
+    "filament_overhang_2_4_speed": [
+        "50"
+    ],
+    "filament_overhang_3_4_speed": [
+        "30"
+    ],
+    "filament_overhang_4_4_speed": [
+        "10"
+    ],
+    "filament_overhang_totally_speed": [
+        "10"
+    ],
+    "filament_bridge_speed": [
+        "25"
+    ],
+    "filament_change_length": [
+        "10"
+    ],
+    "filament_velocity_adaptation_factor": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "hole_coef_1": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.008"
+    ],
+    "hole_coef_3": [
+        "0.23415"
+    ],
+    "hole_limit_max": [
+        "0.22"
+    ],
+    "hole_limit_min": [
+        "0.088"
+    ],
+    "impact_strength_z": [
+        "10"
+    ],
+    "long_retractions_when_ec": [
+        "0"
+    ],
+    "no_slow_down_for_cooling_on_outwalls": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "280",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "cooling_slowdown_logic": [
+        "uniform_cooling"
+    ],
+    "cooling_perimeter_transition_distance": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "112"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "volumetric_speed_coefficients": [
+        "0 0 0 0 0 0"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n\n"
+    ],
+    "filament_adhesiveness_category": [
+        "200"
+    ],
+    "filament_id": "PMAB04",
+    "description": " ",
+    "setting_id": "GFSB99_13",
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
+    "version": "2.6.0.5",
+    "idle_temperature": 0
+}
\ No newline at end of file