The Incident Logs page currently explains how to view the details of an "Alert" incident that's been logged. However, we have no information on how to manage "Alarm" incidents/actions; per @kyle-nrs, there should be a way to clear Alarms, which then causes On Clear actions in an action plan to execute. The test site Yakima Steel doesn't have any logged Alarms. Someone with the technical knowledge will have to provide basic documentation. (I might be able to do it if someone can set up an Alarm action and trigger it, without then acknowledging and clearing it. Probably would need a few triggered Alarms just so I can go through the process a few times if needed.)
The Incident Logs page currently explains how to view the details of an "Alert" incident that's been logged. However, we have no information on how to manage "Alarm" incidents/actions; per @kyle-nrs, there should be a way to clear Alarms, which then causes On Clear actions in an action plan to execute. The test site Yakima Steel doesn't have any logged Alarms. Someone with the technical knowledge will have to provide basic documentation. (I might be able to do it if someone can set up an Alarm action and trigger it, without then acknowledging and clearing it. Probably would need a few triggered Alarms just so I can go through the process a few times if needed.)