diff --git a/vee-port/validation/serial/.gitignore b/vee-port/validation/serial/.gitignore
new file mode 100644
index 0000000..56e8774
--- /dev/null
+++ b/vee-port/validation/serial/.gitignore
@@ -0,0 +1,3 @@
+build/
+.gradle/
+local.properties
diff --git a/vee-port/validation/serial/README.md b/vee-port/validation/serial/README.md
new file mode 100644
index 0000000..2e22acd
--- /dev/null
+++ b/vee-port/validation/serial/README.md
@@ -0,0 +1,41 @@
+# Serial Test Suite
+
+This folder contains a ready-to-use project for testing [Serial](https://docs.microej.com/en/latest/VEEPortingGuide/serial.html) implementations on a device.
+This Test Suite will typically test the following serial operations: open, close, read, write.
+
+## Specifications
+
+- Tested Foundation Library: `Serial <https://repository.microej.com/modules/ej/api/serial/>`_
+- Test Suite Module: `com.microej.pack.serial#serial-testsuite <https://repository.microej.com/modules/com/microej/pack/serial/serial-testsuite/>`_
+
+Set the Test Suite's module version in [build.gradle.kts](build.gradle.kts) to match the version of the pack included in the VEE Port tested.
+
+Please refer to [VEE Port Qualification Test Suite Versioning](https://docs.microej.com/en/latest/VEEPortingGuide/veePortQualification.html#test-suite-versioning)
+to determine the Serial Test Suite module version.
+
+## Requirements
+
+- Read VEE Port Test Suites [documentation](../README.md).
+
+## Tests properties
+
+Before running tests, please fill in the following fields in file `validation/microej-testsuite-common.properties` with expected values:
+
+-  **microej.java.property.serial.port.rx**: [*MANDATORY*] set port used for rx operations (both tx and rx can get mapped to the same port so as to test serial in loopback mode).
+-  **microej.java.property.serial.port.tx**: [*MANDATORY*] set port used for tx operations (both tx and rx can get mapped to the same port so as to test serial in loopback mode).
+-  **microej.java.property.serial.port.baudrate**: [*OPTIONAL*] set baudrate of rx/tx ports (default value: 115200).
+-  **microej.java.property.serial.port.bitsperchar**: [*OPTIONAL*] set data bits of rx/tx ports (default value: 8).
+-  **microej.java.property.serial.port.stopbits**: [*OPTIONAL*] set stop bits of rx/tx ports (default value: 1).
+-  **microej.java.property.serial.port.parity**: [*OPTIONAL*] set parity of rx/tx ports (default value: 0).
+
+## Usage
+
+- Follow the configuration and execution steps described in VEE Port Test Suites [documentation](../README.md).
+
+## Test Suite Source Code Navigation
+
+- See VEE Port Test Suites [documentation](../README.md).
+
+## Troubleshooting
+
+- See Vee Port Test Suites [documentation](../README.md).
diff --git a/vee-port/validation/serial/build.gradle.kts b/vee-port/validation/serial/build.gradle.kts
new file mode 100644
index 0000000..4bd7866
--- /dev/null
+++ b/vee-port/validation/serial/build.gradle.kts
@@ -0,0 +1,52 @@
+import com.microej.gradle.plugins.TestMode
+import com.microej.gradle.plugins.TestTarget
+
+plugins {
+    id("com.microej.gradle.testsuite")
+}
+
+microej {
+    architectureUsage = System.getProperty("com.microej.architecture.usage") ?: "eval" // or "prod"
+    skippedCheckers = "readme,license,changelog"
+}
+
+dependencies {
+    // Define the VEE Port absolute path here if you test a VEE Port already built
+    // microejVee(files("[vee-port-absolute-path]"))
+    // Uncomment this line and comment the line above it this testsuite project is a part of the VEE Port project
+    microejVee(project(veePortProject))
+}
+
+testing {
+    suites {
+        val test by getting(JvmTestSuite::class) {
+            microej.useMicroejTestEngine(this, TestTarget.EMB, TestMode.MAIN)
+
+            dependencies {
+                implementation(project())
+                implementation(libs.ej.junit)
+                implementation(libs.junit.platform)
+
+                implementation(libs.testsuite.serial)
+                implementation(libs.ej.edc)
+                implementation(libs.ej.bon)
+                implementation(libs.ej.serial)
+            }
+
+            targets {
+                all {
+                    testTask.configure {
+                        filter {
+                            // do not embed inner classes as test classes
+                            excludeTestsMatching("*$*")
+                            excludeTestsMatching("*AbstractTest*")
+                            excludeTestsMatching("*AllTestClasses")
+							
+                            includeTestsMatching("*SingleTest_*")
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
diff --git a/vee-port/validation/serial/config.properties.tpl b/vee-port/validation/serial/config.properties.tpl
new file mode 100644
index 0000000..70c7569
--- /dev/null
+++ b/vee-port/validation/serial/config.properties.tpl
@@ -0,0 +1,85 @@
+# Properties
+#
+# Copyright 2025 MicroEJ Corp. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be found with this software.
+
+###############################################################################
+# 						Testsuite Configuration Options
+#
+# Usage: 
+#   Uncomment and set options marked '[required]'. 
+#   Other options are set with a value that shall not be changed by default.
+# 
+# Each option can be declared outside this file as a system property (in the 
+# gradle.properties with the `systemProp.` prefix for example).
+# This can be useful to avoid to share absolute file-system locations in this file.
+# In this case, it overrides the option defined in this file if any.
+# Moreover, options related to local setup (absolute file-system locations, trace ip & port)
+# can be extracted to the file 'local.properties' which is ignored for source control.   
+#
+# This file respects the Java properties file convention: the OS path
+# must use the UNIX path convention (path separator is '/'). The WINDOWS
+# paths must have been converted manually replacing '\' by '/' or by '\\'.
+###############################################################################
+
+###############################################################################
+# BSP Connection [required]
+# Uncomment one and only one option block depending on how the target VEE Port is connected to BSP.  
+# See https://docs.microej.com/en/latest/VEEPortingGuide/platformCreation.html
+###############################################################################
+
+# No BSP Connection
+#microej.testsuite.properties.deploy.dir.microejapp=[absolute_path]
+#microej.testsuite.properties.deploy.dir.microejlib=[absolute_path]
+#microej.testsuite.properties.deploy.dir.microejinc=[absolute_path]
+#microej.testsuite.properties.deploy.dir.microejscript=[absolute_path]
+
+# Partial BSP Connection
+#microej.testsuite.properties.deploy.bsp.root.dir=[absolute_path]
+#microej.testsuite.properties.deploy.bsp.microejscript=true
+
+# Full BSP Connection
+#microej.testsuite.properties.deploy.bsp.microejscript=true
+
+###############################################################################
+# Trace Redirection (System.out)
+###############################################################################
+
+# Uncomment and define these 2 properties when trace is redirected by 'Serial to Socket Transmitter' tool
+#microej.testsuite.properties.testsuite.trace.ip=localhost
+#microej.testsuite.properties.testsuite.trace.port=5555
+# Otherwise uncomment this property if the trace is redirected by 'run.bat' or 'run.sh' script.
+#microej.testsuite.properties.launch.test.trace.file=true
+
+# VEE Port specific option to redirect trace on dedicated UART
+#microej.testsuite.properties.debug.traces.uart=SET
+
+#######################################################################
+# Advanced Options
+# These options shall not be changed by default.
+###############################################################################
+
+# The deploy tool to run after the build of the microejapp.o (defaults to 'Platform Configuration Additions')
+microej.testsuite.properties.microejtool.deploy.name=deployToolBSPRun
+
+# Set the verbose or not. Possible values: `true` or `false`
+# When this option is set to `true`, the harness will output the execution trace.
+microej.testsuite.verbose=true
+
+# The testsuite timeout (in seconds)
+microej.testsuite.timeout=600
+
+# The number of times we'll retry a test if it fails
+microej.testsuite.retry.count=1
+
+# Retry a test unless this pattern is shown
+microej.testsuite.retry.unless=MicroEJ START
+
+# A jvm args to pass to the testsuite harness
+microej.testsuite.jvmArgs=-Xmx768m
+
+# A jvm args to pass to launch scripts forked vm
+microej.testsuite.properties.launch.properties.jvm=-Xmx2048M
+
+# The foundation jars used for the code coverage, useful only if the target.vm.name = S3
+microej.testsuite.cc.jars.name.regex=serial-(.*)\.jar
diff --git a/vee-port/validation/serial/validation/microej-testsuite-common.properties b/vee-port/validation/serial/validation/microej-testsuite-common.properties
new file mode 100644
index 0000000..539cd6c
--- /dev/null
+++ b/vee-port/validation/serial/validation/microej-testsuite-common.properties
@@ -0,0 +1,35 @@
+# Testsuite Application Options
+#
+# Copyright 2025 MicroEJ Corp. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be found with this software.
+
+# Java memory settings
+core.memory.immortal.memory=RAM
+core.memory.immortal.size=1024
+core.memory.javaheap.memory=RAM
+core.memory.javaheap.size=65536
+core.memory.javaheapsum.size=65536
+core.memory.thread.block.size=512
+core.memory.thread.max.size=10
+core.memory.threads.memory=RAM
+core.memory.threads.pool.memory=RAM
+core.memory.threads.pool.size=16
+core.memory.threads.size=4
+
+# [MANDATORY] set port used for rx operations (both tx and rx can get mapped to the same port so as to test serial in loopback mode).
+microej.java.property.serial.port.rx=COM0
+
+# [MANDATORY] set port used for tx operations (both tx and rx can get mapped to the same port so as to test serial in loopback mode).
+microej.java.property.serial.port.tx=COM0
+
+# [OPTIONAL] set baudrate of rx/tx ports (default value: 115200).
+microej.java.property.serial.port.baudrate=115200
+
+# [OPTIONAL] set data bits of rx/tx ports (default value: 8).
+microej.java.property.serial.port.bitsperchar=8
+
+# [OPTIONAL] set stop bits of rx/tx ports (default value: 1).
+microej.java.property.serial.port.stopbits=1
+
+# [OPTIONAL] set parity of rx/tx ports (default value: 0).
+microej.java.property.serial.port.parity=0