Audio not working vs1053

[redstoicescu]

I do not use i2s but :
[ 3226][E][main.cpp:1809] reservepin(): [main] Pin 5 is already reserved!
[ 3232][I][main.cpp:1911] readIOprefs(): [main] pin_i2s_bck set to 5
[ 3239][E][main.cpp:1809] reservepin(): [main] Pin 32 is already reserved!
[ 3245][I][main.cpp:1911] readIOprefs(): [main] pin_i2s_lck set to 32
[ 3252][E][main.cpp:1809] reservepin(): [main] Pin 34 is already reserved!
[ 3258][I][main.cpp:1911] readIOprefs(): [main] pin_i2s_din set to 34
[

[Edzelf]

Remove the settings of "pin_i2s_bc", "pin_i2s_lck" and "pin_i2s_din" from the configuration page through the web interface.

[redstoicescu]

removed but :
[ 30437][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:802E R1:802E R2:8700
[ 30447][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:804F R1:83FF R2:804F
[ 30457][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:808B R1:8BFF R2:808B
[ 30468][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:809D R1:8AFF R2:809D
[ 30478][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:80D3 R1:89FF R2:80D3
[ 30489][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:80F1 R1:8CFF R2:80F1
[ 30499][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:811B R1:83FF R2:811B
[ 30510][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:8142 R1:8142 R2:8100
[ 30523][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:81C3 R1:89FF R2:81C3
[ 30533][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:81C6 R1:81C6 R2:8900
[ 30544][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:81E1 R1:8CFF R2:81E1
[ 30554][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:81FC R1:81FC R2:8E00
[ 30564][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:822C R1:822C R2:9600
[ 30575][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:8241 R1:90FF R2:8241
[ 30586][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:8283 R1:99FF R2:8283
[ 30595][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:8289 R1:9AFF R2:8289
[ 30605][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:8298 R1:8298 R2:9A00
[ 30615][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:82A1 R1:9CFF R2:82A1
[ 30630][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:837C R1:837C R2:9600
[ 30641][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:83A3 R1:9DFF R2:83A3
[ 31282][I][main.cpp:2836] setup(): [main] Playtask started
[ 31499][I][main.cpp:967] nextPreset(): [main] nextPreset is 6

[Edzelf]

Send the full logging, then I can see what is wrong. It is certainly an SPI problem (wiring/configuration).

[redstoicescu]

Starting ESP32-radio running on CPU 1 at 240 MHz.
[ 3042][I][main.cpp:2584] setup(): [main] Version Thu, 26 Dec 2023 14:30:00 GMT. Free memory 110580
[ 3044][I][main.cpp:2585] setup(): [main] Display type is BLUETFT
[ 3141][I][main.cpp:2595] setup(): [main] SPIFFS is okay, space 1016801, used 33383
[ 3145][I][main.cpp:2616] setup(): [main] Found partition 'nvs ' at offset 0x009000 with size 20480
[ 3147][I][main.cpp:2616] setup(): [main] Found partition 'otadata ' at offset 0x00E000 with size 8192
[ 3156][I][main.cpp:2616] setup(): [main] Found partition 'spiffs ' at offset 0x2F0000 with size 1114112
[ 3171][I][main.cpp:2488] fillkeylist(): [main] Read 45 keys from NVS
[ 3178][I][main.cpp:1911] readIOprefs(): [main] pin_ir set to 35
[ 3179][I][main.cpp:1911] readIOprefs(): [main] pin_enc_clk set to 25
[ 3185][I][main.cpp:1911] readIOprefs(): [main] pin_enc_dt set to 26
[ 3191][I][main.cpp:1911] readIOprefs(): [main] pin_enc_sw set to 27
[ 3197][I][main.cpp:1911] readIOprefs(): [main] pin_tft_cs set to 15
[ 3204][I][main.cpp:1911] readIOprefs(): [main] pin_tft_dc set to 2
[ 3210][I][main.cpp:1911] readIOprefs(): [main] pin_vs_cs set to 5
[ 3216][I][main.cpp:1911] readIOprefs(): [main] pin_vs_dcs set to 32
[ 3222][I][main.cpp:1911] readIOprefs(): [main] pin_vs_dreq set to 34
[ 3227][I][main.cpp:1911] readIOprefs(): [main] pin_spi_sck set to 18
[ 3233][I][main.cpp:1911] readIOprefs(): [main] pin_spi_miso set to 19
[ 3240][I][main.cpp:1911] readIOprefs(): [main] pin_spi_mosi set to 23
[ 3257][I][main.cpp:2657] setup(): [main] GPIO0 is HIGH
[ 3268][I][main.cpp:2657] setup(): [main] GPIO2 is LOW, probably no PULL-UP
[ 3278][I][main.cpp:2657] setup(): [main] GPIO4 is HIGH
[ 3288][I][main.cpp:2657] setup(): [main] GPIO5 is HIGH
[ 3298][I][main.cpp:2657] setup(): [main] GPIO12 is HIGH
[ 3308][I][main.cpp:2657] setup(): [main] GPIO13 is HIGH
[ 3318][I][main.cpp:2657] setup(): [main] GPIO14 is HIGH
[ 3328][I][main.cpp:2657] setup(): [main] GPIO15 is HIGH
[ 3338][I][main.cpp:2657] setup(): [main] GPIO16 is HIGH
[ 3348][I][main.cpp:2657] setup(): [main] GPIO17 is HIGH
[ 3358][I][main.cpp:2657] setup(): [main] GPIO18 is HIGH
[ 3368][I][main.cpp:2657] setup(): [main] GPIO19 is HIGH
[ 3378][I][main.cpp:2657] setup(): [main] GPIO21 is HIGH
[ 3388][I][main.cpp:2657] setup(): [main] GPIO22 is HIGH
[ 3398][I][main.cpp:2657] setup(): [main] GPIO23 is HIGH
[ 3408][I][main.cpp:2657] setup(): [main] GPIO25 is HIGH
[ 3418][I][main.cpp:2657] setup(): [main] GPIO26 is HIGH
[ 3428][I][main.cpp:2657] setup(): [main] GPIO27 is HIGH
[ 3438][I][main.cpp:2657] setup(): [main] GPIO32 is HIGH
[ 3448][I][main.cpp:2657] setup(): [main] GPIO33 is HIGH
[ 3458][I][main.cpp:2657] setup(): [main] GPIO34 is HIGH
[ 3468][I][main.cpp:2657] setup(): [main] GPIO35 is LOW, probably no PULL-UP
[ 3478][I][main.cpp:2657] setup(): [main] GPIO39 is LOW, probably no PULL-UP
[ 3479][I][main.cpp:1757] readprogbuttons(): [main] gpio_00 will execute uppreset = 1
[ 3482][I][main.cpp:1757] readprogbuttons(): [main] gpio_12 will execute upvolume = 2
[ 3489][I][main.cpp:1757] readprogbuttons(): [main] gpio_13 will execute downvolume = 2
[ 3497][I][main.cpp:1757] readprogbuttons(): [main] gpio_14 will execute stop
[ 3504][I][main.cpp:1757] readprogbuttons(): [main] gpio_17 will execute resume
[ 3513][I][main.cpp:2669] setup(): [main] Enable pin 35 for IR
[ 3517][I][main.cpp:2674] setup(): [main] Start BLUETFT display
[ 4306][I][main.cpp:2280] mk_lsan(): [main] Create list with acceptable WiFi networks
[ 4307][I][WiFiMulti.cpp:84] addAP(): [WIFI][APlistAdd] add SSID: SSID-11
[ 4309][I][main.cpp:2310] mk_lsan(): [main] Added SSID-11 to list of networks
[ 4317][I][WiFiMulti.cpp:84] addAP(): [WIFI][APlistAdd] add SSID: red
[ 4323][I][main.cpp:2310] mk_lsan(): [main] Added red to list of networks
[ 4330][I][WiFiMulti.cpp:84] addAP(): [WIFI][APlistAdd] add SSID: SSID2
[ 4336][I][main.cpp:2310] mk_lsan(): [main] Added SSID2 to list of networks
[ 4857][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 4953][V][WiFiGeneric.cpp:338] _arduino_event_cb(): STA Started
[ 4953][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 2 - STA_START
[ 5453][I][main.cpp:866] listNetworks(): [main] Scan Networks
[ 7377][V][WiFiGeneric.cpp:381] _arduino_event_cb(): SCAN Done: ID: 128, Status: 0, Results: 10
[ 7378][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 1 - SCAN_DONE
[ 7382][I][main.cpp:868] listNetworks(): [main] Scan completed
[ 7388][I][main.cpp:876] listNetworks(): [main] Number of available networks: 10
[ 7395][I][main.cpp:894] listNetworks(): [main] 1 - DIGI-7Mk9 Signal: -49 dBm,
Encryption WPA_WPA2_PSK, Not accepttable
[ 7407][I][main.cpp:894] listNetworks(): [main] 2 - red Signal: -50 dBm,
Encryption WPA_WPA2_PSK, Acceptable
[ 7419][I][main.cpp:894] listNetworks(): [main] 3 - red2 Signal: -51 dBm,
Encryption WPA_WPA2_PSK, Acceptable
[ 7430][I][main.cpp:894] listNetworks(): [main] 4 - TP-Link_9590 Signal: -68 dBm,
Encryption WPA2_PSK, Not accepttable
[ 7442][I][main.cpp:894] listNetworks(): [main] 5 - UPCBEE11235 Signal: -73 dBm,
Encryption WPA_WPA2_PSK, Not accepttable
[ 7454][I][main.cpp:894] listNetworks(): [main] 6 - Cosconel2.5 Signal: -76 dBm,
Encryption WPA_WPA2_PSK, Not accepttable
[ 7466][I][main.cpp:894] listNetworks(): [main] 7 - Cosconel1 Signal: -76 dBm,
Encryption WPA_WPA2_PSK, Not accepttable
[ 7478][I][main.cpp:894] listNetworks(): [main] 8 - DIGI-cNh7 Signal: -82 dBm,
Encryption WPA_WPA2_PSK, Not accepttable
[ 7490][I][main.cpp:894] listNetworks(): [main] 9 - UPC95246C4 Signal: -92 dBm,
Encryption WPA_WPA2_PSK, Not accepttable
[ 7502][I][main.cpp:894] listNetworks(): [main] 10 - UPC4265EE6 Signal: -93 dBm,
Encryption WPA_WPA2_PSK, Not accepttable
[ 7514][I][main.cpp:898] listNetworks(): [main] End of list
[ 7541][I][main.cpp:967] nextPreset(): [main] nextPreset is 0
[ 7556][I][main.cpp:2719] setup(): [main] Connect to network
[ 7561][V][WiFiGeneric.cpp:341] _arduino_event_cb(): STA Stopped
[ 7563][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 3 - STA_STOP
[ 8572][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 8576][V][WiFiGeneric.cpp:338] _arduino_event_cb(): STA Started
[ 8576][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 2 - STA_START
[ 16188][V][WiFiGeneric.cpp:381] _arduino_event_cb(): SCAN Done: ID: 129, Status: 0, Results: 16
[ 16189][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 1 - SCAN_DONE
[ 16193][I][WiFiMulti.cpp:114] run(): [WIFI] scan done
[ 16198][I][WiFiMulti.cpp:119] run(): [WIFI] 16 networks found
[ 16203][D][WiFiMulti.cpp:151] run(): 0: [3][54:E1:05:5D:27:A1] DIGI-7Mk9 (-51) *
[ 16211][D][WiFiMulti.cpp:149] run(): ---> 1: [3][56:E1:05:1D:27:A1] red (-51) *
[ 16219][D][WiFiMulti.cpp:151] run(): 2: [3][56:E1:05:2D:27:A1] red2 (-52) *
[ 16226][D][WiFiMulti.cpp:151] run(): 3: [3][90:5C:44:4F:0C:4D] UPCBEE11235 (-73) *
[ 16234][D][WiFiMulti.cpp:151] run(): 4: [9][FA:4E:33:17:7B:21] Cosconel2.5 (-76) *
[ 16242][D][WiFiMulti.cpp:151] run(): 5: [9][F8:4E:33:17:7B:21] Cosconel1 (-77) *
[ 16250][D][WiFiMulti.cpp:151] run(): 6: [4][7A:A2:F4:8B:95:88] TP-Link_9590 (-79) *
[ 16258][D][WiFiMulti.cpp:151] run(): 7: [9][74:31:AF:13:AB:11] DIGI-cNh7 (-80) *
[ 16266][D][WiFiMulti.cpp:151] run(): 8: [1][E2:37:BF:09:CD:C1] DIRECT-R1-BRAVIA (-86) *
[ 16274][D][WiFiMulti.cpp:151] run(): 9: [3][66:FF:0A:02:60:5D] DIRECT-Li-BRAVIA (-86) *
[ 16282][D][WiFiMulti.cpp:151] run(): 10: [1][F4:91:1E:67:A7:B7] 1e67a7b7 (-92) *
[ 16290][D][WiFiMulti.cpp:151] run(): 11: [1][C8:3A:35:1D:F5:90] Liviu_Network (-92) *
[ 16298][D][WiFiMulti.cpp:151] run(): 12: [4][72:5A:B0:B5:BC:E5] TP-Link_Guest_BCE5 (-92)
*
[ 16307][D][WiFiMulti.cpp:151] run(): 13: [1][F0:A7:31:B4:68:B2] DIGI-rx3M (-93) *
[ 16315][D][WiFiMulti.cpp:151] run(): 14: [11][54:67:51:20:42:DB] UPC95246C4 (-93) *
[ 16323][D][WiFiMulti.cpp:151] run(): 15: [11][54:67:51:26:97:58] UPC4265EE6 (-95) *
[ 16331][I][WiFiMulti.cpp:160] run(): [WIFI] Connecting BSSID: 56:E1:05:1D:27:A1 SSID: red Channel: 3 (-51)
[ 16342][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
[ 16978][V][WiFiGeneric.cpp:353] _arduino_event_cb(): STA Connected: SSID: red, BSSID: 56:e1:05:1d:27:a1, Channel: 3, Auth: WPA_WPA2_PSK
[ 16979][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 4 - STA_CONNECTED
[ 17218][V][WiFiGeneric.cpp:367] _arduino_event_cb(): STA Got New IP:192.168.1.112
[ 17219][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 7 - STA_GOT_IP
[ 17222][D][WiFiGeneric.cpp:991] _eventCallback(): STA IP: 192.168.1.112, MASK: 255.255.255.0, GW: 192.168.1.1
[ 17232][I][WiFiMulti.cpp:174] run(): [WIFI] Connecting done.
[ 17237][D][WiFiMulti.cpp:175] run(): [WIFI] SSID: red
[ 17242][D][WiFiMulti.cpp:176] run(): [WIFI] IP: 192.168.1.112
[ 17248][D][WiFiMulti.cpp:177] run(): [WIFI] MAC: 56:E1:05:1D:27:A1
[ 17254][D][WiFiMulti.cpp:178] run(): [WIFI] Channel: 3
[ 17260][I][main.cpp:1639] connectwifi(): [main] SSID = red
[ 17264][I][main.cpp:1643] connectwifi(): [main] IP = 192.168.1.112
[ 17272][I][main.cpp:2729] setup(): [main] Start web server
[ 17277][I][main.cpp:2739] setup(): [main] Network found. Starting clients
[ 17287][I][main.cpp:2773] setup(): [main] MDNS responder started
[ 18290][I][main.cpp:2811] setup(): [main] Rotary encoder is enabled
[ 18290][I][main.cpp:4375] gettime(): [main] Sync TOD
[ 19531][I][main.cpp:4388] gettime(): [main] TOD synced
[ 19661][I][VS1053.cpp:129] testComm(): [VS1053] Slow SPI, Testing VS1053 read/write registers...[ 19912][I][VS1053.cpp:129] testComm(): [VS1053] Fast SPI, Testing VS1053 read/write registers again...
[ 20175][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A60 R1:FF00 R2:0000
[ 20185][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A63 R1:0000 R2:0000
[ 20195][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A66 R1:0000 R2:0000
[ 20205][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A69 R1:0000 R2:0000
[ 20215][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A6C R1:0000 R2:0000
[ 20225][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A6F R1:0000 R2:0000
[ 20235][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A72 R1:0000 R2:0000
[ 20245][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A75 R1:0000 R2:0000
[ 20255][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A78 R1:0000 R2:0000
[ 20265][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A7B R1:0000 R2:0000
[ 20275][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A7E R1:0000 R2:0000
[ 20285][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A81 R1:0000 R2:0000
[ 20295][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A84 R1:0000 R2:0000
[ 20305][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A87 R1:0000 R2:0000
[ 20315][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A8A R1:0000 R2:0000
[ 20325][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A8D R1:0000 R2:0000
[ 20335][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A90 R1:0000 R2:0000
[ 20345][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A93 R1:0000 R2:0000
[ 20355][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A96 R1:0000 R2:0000
[ 20365][E][VS1053.cpp:150] testComm(): [VS1053] SPI error. SB:2A99 R1:0000 R2:0000
[ 20376][W][VS1053.cpp:162] testComm(): [VS1053] This is not a VS1053, but a VS1001 instead!
[ 21532][I][main.cpp:2836] setup(): [main] Playtask started
[ 21749][I][main.cpp:967] nextPreset(): [main] nextPreset is 6
[ 21750][I][main.cpp:3406] radiofuncs(): [main] Radiofuncs cmd is 1
[ 21750][I][main.cpp:4451] playtask(): [main] QSTOPSONG
[ 21752][I][main.cpp:1401] connecttohost(): [main] Connect to host icecast.omroep.nl:80/radio1-bb-mp3
[ 21777][I][VS1053.cpp:286] stopSong(): [VS1053] Song stopped correctly after 0 msec
[ 22081][I][main.cpp:2543] onConnect(): [main] Connected to host at 145.58.53.168 on port 80
[ 22166][I][main.cpp:1462] connecttohost(): [main] send GET command
[ 22271][I][main.cpp:3654] handlebyte_ch(): [main] Switch to HEADER
[ 22271][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: Server: Icecast 2.4.0-kh22
[ 22274][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: Connection: Close
[ 22281][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: Pragma: no-cache
[ 22288][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: Expires: Thu, 19 Nov 1981 08:52:00 GMT
[ 22297][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: Cache-Control: no-store, no-cache, private
[ 22306][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: Content-Type: audio/mpeg
[ 22314][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: icy-br: 192
[ 22320][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: ice-audio-info: samplerate=48000;channels=2;bitrate=192
[ 22331][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: icy-genre: Talk
[ 22338][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: icy-metadata: 1
[ 22345][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: icy-name: NPO Radio1
[ 22352][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: icy-pub: 0
[ 22359][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: icy-url: http://www.radio1.nl
[ 22367][I][main.cpp:3675] handlebyte_ch(): [main] Headerline: icy-metaint: 16000
[ 22374][I][main.cpp:3745] handlebyte_ch(): [main] Switch to DATA, bitrate is 192, metaint is 16000
[ 22383][I][main.cpp:4443] playtask(): [main] QSTARTSONG
[ 22743][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 65 bytes
[ 22743][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - Langs de Lijn En
Omstreken - NOS, EO';
[260233][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 51 bytes
[260234][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Charles & Eddie - Would I lie to you';
[470908][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 65 bytes
[470909][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - Langs de Lijn En
Omstreken - NOS, EO';
[4432619][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 55 bytes
[4432620][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Dylan, Bob - Subterranean homesick blues';
[4567942][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 65 bytes
[4567942][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - Langs de Lijn En Omstreken - NOS, EO';
[5803163][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 60 bytes
[5803163][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - NOS Met het Oog
op Morgen - NOS';
[6586008][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 43 bytes
[6586008][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Noisettes - Never forget you';[6703362][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 60 bytes
[6703363][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - NOS Met het Oog
op Morgen - NOS';
[7220288][I][main.cpp:4373] gettime(): [main] Sync TOD, old value is 23:23:38
[7220288][I][main.cpp:4375] gettime(): [main] Sync TOD
[7220289][I][main.cpp:4388] gettime(): [main] TOD synced
[7278792][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 26 bytes
[7278793][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Nona - Liar';
[7408713][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 60 bytes
[7408714][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - NOS Met het Oog
op Morgen - NOS';
[8137596][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 78 bytes
[8137597][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Marvin Gaye & Tammi Terrell -
Ain't nothing like the real thing';
[8265644][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 60 bytes
[8265644][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - NOS Met het Oog
op Morgen - NOS';
[9403056][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 66 bytes
[9403056][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - Nooit Meer Slapen: Herman Koch - VPRO';
[13002430][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 38 bytes
[13002430][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Wie luistert, weet meer';
[13003134][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 71 bytes
[13003134][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - MISCHA! praat met Fajah Lourens - AVROTROS';
[14420288][I][main.cpp:4373] gettime(): [main] Sync TOD, old value is 01:23:38
[14420288][I][main.cpp:4375] gettime(): [main] Sync TOD
[14420289][I][main.cpp:4388] gettime(): [main] TOD synced
[16603468][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 49 bytes
[16603469][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - De Nacht van EO - EO';
[21620289][I][main.cpp:4373] gettime(): [main] Sync TOD, old value is 03:23:37
[21620289][I][main.cpp:4375] gettime(): [main] Sync TOD
[21620290][I][main.cpp:4388] gettime(): [main] TOD synced
[23715976][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 63 bytes
[23715977][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Simon & Garfunkel - Old friends / Bookends theme';
[23794575][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 49 bytes
[23794575][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - De Nacht van EO - EO';
[24815997][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 37 bytes
[24815998][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Nutini, Paolo - Rewind';
[25068741][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 49 bytes
[25068741][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - De Nacht van EO - EO';
[26289410][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 36 bytes
[26289411][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Kodaline - All I want';
[26584752][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 49 bytes
[26584752][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - De Nacht van EO - EO';
[27129560][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 47 bytes
[27129560][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Scott, Calum - Dancing on my
own';
[27383020][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 49 bytes
[27383021][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - De Nacht van EO - EO';
[27404123][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 45 bytes
[27404123][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - Vroeg! - BNNVARA';
[28820288][I][main.cpp:4373] gettime(): [main] Sync TOD, old value is 05:23:37
[28820288][I][main.cpp:4375] gettime(): [main] Sync TOD
[28820289][I][main.cpp:4388] gettime(): [main] TOD synced
[30015129][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 38 bytes
[30015129][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='Beatles - Come together';
[30265242][I][main.cpp:1295] showstreamtitle(): [main] Streamtitle found, 45 bytes
[30265243][I][main.cpp:1296] showstreamtitle(): [main] StreamTitle='NPO Radio 1 - Vroeg! - BNNVARA';

[Edzelf]

It is an SPI problem. At [ 19661] you can see that the SPI test succeeded with a low SPI frequency (0.2 MHz) succeeded. The test with a high SPI frequency (5 MHz) fails. So first thing to do is to check the SPI bus wiring.
At [ 20376] you can see that the chip in your soundmodule is a VS1001 instead of a VS1053. It might also be a fake VS1053. A real VS1001 will work for MP3 data only.
You may try to remove line 205 in VS1053.cpp ( S1053_SPI._clock = 5000000 ; // SPI Clock to 5 MHz. ), but it would be better to replace your VS1053 module with a better one.

[redstoicescu]

changed in config.h dec1003 to 1053 :
[ 84816][W][VS1053.cpp:162] testComm(): [VS1053] This is not a VS1053, but a VS1001 instead!

[redstoicescu]

modified vs1053
rebooting continuous

[redstoicescu]

Solved , wiring problem
Thank you for your patience