Hello Community,
any chance this is working with one of these alternative boards?
- Banana Pi M2 Berry
- Banana Pi M5
- Radxa Rock 3 A
- Radxa Rock 4 C+
my first test with M2 Berry and the 16.04 official image was that the GrovePi is visible via $ sudo i2cdetect -y 2
the grove_rgb_lcd example works with the smbus number changed from 1 to 2.
but i did not get the grovepi.py to work. also i tried with setting it to hw smbus mode and tweaking the di_i2c.py script to use also use the bus '2':
with this i get an exception at line 225
as after the first read the data variable just has a simple 0 in there. (not a list...)
anyone had this running?
Hello Community,
any chance this is working with one of these alternative boards?
my first test with M2 Berry and the 16.04 official image was that the GrovePi is visible via
$ sudo i2cdetect -y 2the grove_rgb_lcd example works with the smbus number changed from 1 to 2.
but i did not get the grovepi.py to work. also i tried with setting it to hw smbus mode and tweaking the di_i2c.py script to use also use the bus '2':
with this i get an exception at line 225
as after the first read the data variable just has a simple 0 in there. (not a list...)
anyone had this running?