'WiFi' was not declared in this scope

[RobertSchuster]

Compiling with Arduino IDE failes with 'WiFi' was not declared in this scope

See attached file.
compile Error.txt

Arduino IDE and all libraries are up2date.
Any ideas?

[ptownhippie]

I read somewhere about changing something in the file concerning HTTP. Somewhere in the file HTTP needs to change to be changed to utilize Wi-Fi. I read this from a collaborator and I will try to find it and let you know.

[bdokimakis]

Same here.

[CircuitSetup]

Please try using this build of EmonESP: https://github.com/CircuitSetup/EmonESP

[bdokimakis]

Compiling with Arduino IDE 2.3.6 gives the following error:

In file included from C:\Users\bdoki\Downloads\EmonESP-master\EmonESP-master\src\emonesp.h:31,
from C:\Users\bdoki\Downloads\EmonESP-master\EmonESP-master\src\src.ino:30:
C:\Users\bdoki\Downloads\EmonESP-master\EmonESP-master\src\debug.h:7:10: fatal error: MicroDebug.h: No such file or directory
7 | #include "MicroDebug.h"
| ^~~~~~~~~~~~~~
compilation terminated.
exit status 1

Compilation error: MicroDebug.h: No such file or directory

[CircuitSetup]

Yes, that is a library that needs to be installed, along with others listed in the platformio file

[bdokimakis]

I've installed all the libraries that are mentioned in https://github.com/CircuitSetup/EmonESP/blob/master/platformio.ini and could be found via the Library Manager of the Arduino IDE. Micro Debug@^0.0.4 was not among them. Only this https://github.com/rlogiacco/MicroDebug is available and doesn't resolve the problem I mentioned above.

Could you provide a thorough installation guide for Arduino IDE?

[CircuitSetup]

I've installed all the libraries that are mentioned in https://github.com/CircuitSetup/EmonESP/blob/master/platformio.ini and could be found via the Library Manager of the Arduino IDE. Micro Debug@^0.0.4 was not among them.

This is the library needed: https://github.com/jeremypoulter/MicroDebug
There are also some others written by Jeremy:
https://github.com/jeremypoulter/StreamSpy
https://github.com/jeremypoulter/ESPAL
https://github.com/jeremypoulter/ConfigJson