Use for the Jlink

[DavidEnds]

Hi, Thanks for your jobs. Its so usefull. I bought a jlink (chinesse) loader with the idea that I needed it to load a bootloader. From what I see, it is not necessary for anything. What can I use it for? Thanks again

[BLavery]

Hello David, I bought a Jlink also. And I also have not used it & not needed it. It's lucky the Chinese versions don't cost too much! I got as far as tracking down a miniature connector for those half-pitch pins. But then I never needed it. Which of course is a different story from the STM devices, where using a STlink was pretty much a necessity. Brian

…

On Tue, 12 Mar 2019 at 06:08, David Matias ***@***.***> wrote: Hi, Thanks for your jobs. Its so usefull. I bought a jlink (chinesse) loader with the idea that I needed it to load a bootloader. From what I see, it is not necessary for anything. What can I use it for? Thanks again — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#1>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AIYX1boegVcMpyej4s1OLy1y8MNTCv-dks5vVreagaJpZM4bpdP2> .

[mpmarks]

I bought some of these boards from Robotdyn recently and found that I could use PlatformIO to program them if I set the board type to mzeroproUSB. Then Platformio used the stk500 upload by default and it worked perfectly.