diff --git a/docs/assets/temp-1-select-temp-probe-example.png b/docs/assets/temp-1-select-temp-probe-example.png new file mode 100644 index 0000000000..39cb5dda6d Binary files /dev/null and b/docs/assets/temp-1-select-temp-probe-example.png differ diff --git a/docs/assets/temp1b-temp-probe-pic-1-1.png b/docs/assets/temp1b-temp-probe-pic-1-1.png deleted file mode 100644 index a6bd37864c..0000000000 Binary files a/docs/assets/temp1b-temp-probe-pic-1-1.png and /dev/null differ diff --git a/docs/homey/products/temp1/addons/temp-probe.md b/docs/homey/products/temp1/addons/temp-probe.md index fbdcddab74..d01301b6c2 100755 --- a/docs/homey/products/temp1/addons/temp-probe.md +++ b/docs/homey/products/temp1/addons/temp-probe.md @@ -1,27 +1 @@ -# TEMP-1 Temp Probe - -The TEMP-1 comes with an optional temp probe which can be used to monitor a fridge, freezer, fish tank, pool, hot tub, etc. It includes a protected cable but the TEMP-1 itself needs to stay in a cool environment. - -1\. To use your temp probe simply take it out of the package and insert it into the 3.5mm port on your TEMP-1. - -![](/assets/temp1-temp-probe-insert-1.jpg) - -![](/assets/temp1-probe-fully-inserted.jpg) - -2\. Once inserted, proceed to step 3. - -![](/assets/temp1-temp-probe-pic-1.jpg) - -3\. Go to the device page of your TEMP-1 in Home Assistant and choose probe "Dallas" aka Temperature. - -![](/assets/temp1b-temp-probe-pic-1-1.png) - -!!! danger "Do not leave your sensor outside or let it get wet!" - - The TEMP-1 should not be left outside for long periods of time or allowed to get wet. You will need to use another case around your TEMP-1 if there will be high moisture content in the air or if it is expected to rain. - -**Example images of the long temperature probe in a mini freezer:** - -![](/assets/temp1b-temp-probe-freezer-pic-1.jpg) - -![](/assets/temp1b-temp-probe-freezer-pic-2.jpg) \ No newline at end of file +--8<-- "products/temp1/addons/temp-probe.md:5:" diff --git a/docs/homey/products/temp1b/addons/temp-probe.md b/docs/homey/products/temp1b/addons/temp-probe.md index 2272846f73..0887a27137 100755 --- a/docs/homey/products/temp1b/addons/temp-probe.md +++ b/docs/homey/products/temp1b/addons/temp-probe.md @@ -1,33 +1 @@ -# TEMP-1B Temp Probe - -The TEMP-1B comes with an optional temp probe which can be used to monitor a fridge, freezer, fish tank, pool, hot tub, etc. It includes a protected cable but the TEMP-1 itself needs to stay in a cool environment. - -1\. To use your temp probe simply take it out of the package and insert it into the 3.5mm port on your TEMP-1B. - -![](/assets/temp-probe-insert-1.jpg) - -![](/assets/temp-probe-fully-inserted.jpg) - -2\. Once inserted, proceed to step 3 unless you have a battery in it - -!!! tip "If you are using it with a battery you need to push the reset button." - - The TEMP-1B looks for the temp probe when it boots and if it is not there then the sensor is marked as failed and will not work properly in Home Assistant. You need to click the reset button if you have a battery in it or power cycle your TEMP-1B to make it reliably use the new food temperature probe. - -  - -![](/assets/temp1b-temp-probe-pic-1.jpg) - -3\. Go to the device page of your TEMP-1B in Home Assistant and choose probe "Dallas" aka Temperature. - -![](/assets/temp1b-temp-probe-pic-1-1.png) - -!!! danger "Do not leave your sensor outside or let it get wet!" - - The TEMP-1B should not be left outside for long periods of time or allowed to get wet. You will need to use another case around your TEMP-1B if there will be high moisture content in the air or if it is expected to rain. - -**Example images of the long temperature probe in a mini freezer:** - -![](/assets/temp1b-temp-probe-freezer-pic-1.jpg) - -![](/assets/temp1b-temp-probe-freezer-pic-2.jpg) \ No newline at end of file +--8<-- "products/temp1b/addons/temp-probe.md:5:" diff --git a/docs/products/temp1/addons/temp-probe.md b/docs/products/temp1/addons/temp-probe.md index 41ee4a042d..6c6204aa75 100755 --- a/docs/products/temp1/addons/temp-probe.md +++ b/docs/products/temp1/addons/temp-probe.md @@ -18,7 +18,7 @@ The TEMP-1 comes with an optional temp probe which can be used to monitor a frid 3\. Go to the device page of your TEMP-1 in Home Assistant and choose the Temperature Probe. -![](/assets/temp1b-temp-probe-pic-1-1.png) +![](/assets/temp-1-select-temp-probe-example.png) !!! danger "Do not leave your sensor outside or let it get wet!" diff --git a/docs/products/temp1b/addons/temp-probe.md b/docs/products/temp1b/addons/temp-probe.md index f23490965c..73b87341e1 100755 --- a/docs/products/temp1b/addons/temp-probe.md +++ b/docs/products/temp1b/addons/temp-probe.md @@ -24,7 +24,7 @@ The TEMP-1B comes with an optional temp probe which can be used to monitor a fri 3\. Go to the device page of your TEMP-1B in Home Assistant and choose the Temperature Probe. -![](/assets/temp1b-temp-probe-pic-1-1.png) +![](/assets/temp-1-select-temp-probe-example.png) !!! danger "Do not leave your sensor outside or let it get wet!"