diff --git a/docs/homey/products/btn1/battery-sensors/wake-up-battery-sensor.md b/docs/homey/products/btn1/battery-sensors/wake-up-battery-sensor.md new file mode 100644 index 0000000000..f6d27b3bef --- /dev/null +++ b/docs/homey/products/btn1/battery-sensors/wake-up-battery-sensor.md @@ -0,0 +1 @@ +--8<-- "products/general/battery-sensors/wake-up-battery-sensor.md:5:" diff --git a/docs/homey/products/general/battery-sensors/wake-up-battery-sensor.md b/docs/homey/products/general/battery-sensors/wake-up-battery-sensor.md index 06e885295b..1844c3757f 100755 --- a/docs/homey/products/general/battery-sensors/wake-up-battery-sensor.md +++ b/docs/homey/products/general/battery-sensors/wake-up-battery-sensor.md @@ -2,30 +2,4 @@ title: Apollo Battery Devices - wake up battery device. description: How to wake up your Apollo device which is currently sleeping. --- -###### Method 1 - -Press the reset button and let go to restart the device
TEMP-1B reset button - -![](/assets/temp-1-reset-button-lid-off.jpg) - -
PLT-1B reset button - -![](/assets/plt-boot-mode-pic-6-1.jpg) - -###### Method 2 - -Quickly press and hold the boot button for 4-5 seconds - -TEMP-1B boot button - -![](/assets/temp-1b-boot-button-lid-off.jpg) - -PLT-1B boot button - -![](/assets/plt-boot-mode-pic-2.jpg) - -Your device is now "awake" but it will not stay awake on its own yet. Click the "prevent sleep" button on your device page in Home Assistant or directly on the device web server such as plt-1.local or its IP address. - -!!! success "Head to the awake helper wiki article" - - If you need to keep your sensor awake for extended periods of time we suggest using our [OTA awake helper](https://wiki.apolloautomation.com/products/general/battery-sensors/awake-ha-helper/). \ No newline at end of file +--8<-- "products/general/battery-sensors/wake-up-battery-sensor.md:5:" diff --git a/docs/products/btn1/battery-sensors/wake-up-battery-sensor.md b/docs/products/btn1/battery-sensors/wake-up-battery-sensor.md new file mode 100644 index 0000000000..f6d27b3bef --- /dev/null +++ b/docs/products/btn1/battery-sensors/wake-up-battery-sensor.md @@ -0,0 +1 @@ +--8<-- "products/general/battery-sensors/wake-up-battery-sensor.md:5:" diff --git a/docs/products/general/battery-sensors/wake-up-battery-sensor.md b/docs/products/general/battery-sensors/wake-up-battery-sensor.md index 06e885295b..ca23452542 100755 --- a/docs/products/general/battery-sensors/wake-up-battery-sensor.md +++ b/docs/products/general/battery-sensors/wake-up-battery-sensor.md @@ -2,30 +2,72 @@ title: Apollo Battery Devices - wake up battery device. description: How to wake up your Apollo device which is currently sleeping. --- -###### Method 1 +There are two ways to wake a sleeping Apollo battery sensor: press the reset button, or hold the boot button. Select your device below for the button locations. -Press the reset button and let go to restart the device
TEMP-1B reset button +=== "TEMP-1B" -![](/assets/temp-1-reset-button-lid-off.jpg) + **Method 1: Reset button.** Press and release the reset button to restart the device. -
PLT-1B reset button + ![](/assets/temp-1-reset-button-lid-off.jpg) -![](/assets/plt-boot-mode-pic-6-1.jpg) + **Method 2: Boot button.** Quickly press and hold the boot button for 4-5 seconds. -###### Method 2 + ![](/assets/temp-1b-boot-button-lid-off.jpg) -Quickly press and hold the boot button for 4-5 seconds + Button locations: [TEMP-1B boot mode](https://wiki.apolloautomation.com/products/temp1b/troubleshooting/temp1b-boot-mode/). -TEMP-1B boot button +=== "PLT-1B" -![](/assets/temp-1b-boot-button-lid-off.jpg) + **Method 1: Reset button.** Press and release the reset button to restart the device. -PLT-1B boot button + ![](/assets/plt-boot-mode-pic-6-1.jpg) -![](/assets/plt-boot-mode-pic-2.jpg) + **Method 2: Boot button.** Quickly press and hold the boot button for 4-5 seconds. -Your device is now "awake" but it will not stay awake on its own yet. Click the "prevent sleep" button on your device page in Home Assistant or directly on the device web server such as plt-1.local or its IP address. + ![](/assets/plt-boot-mode-pic-2.jpg) + + Button locations: [PLT-1B boot mode](https://wiki.apolloautomation.com/products/plt1b/troubleshooting/plt1b-boot-mode/). + +=== "BTN-1" + + **Method 1: Reset button.** Press and release the reset (left) button to restart the device. + + **Method 2: Boot button.** Quickly press and hold the boot (right) button for 4-5 seconds. + + ![](/assets/btn-1-reset-boot-buttons.png) + + Button locations: [BTN-1 boot mode](https://wiki.apolloautomation.com/products/btn1/troubleshooting/btn1-boot-mode/). + +=== "H-1" + + !!! note "Smart firmware only" + + The H-1 only sleeps when running the [smart firmware](https://wiki.apolloautomation.com/products/h1/reflash/). These steps apply when it is running that firmware. + + **Method 1: Reset button.** Press and release the reset button to restart the device. + + **Method 2: Boot button.** Quickly press and hold the boot button for 4-5 seconds. + + ![](/assets/screenshot-2024-11-01-015948.png) + + Button locations: [H-1 boot mode](https://wiki.apolloautomation.com/products/h1/boot-mode/). + +=== "H-2" + + !!! note "Smart firmware only" + + The H-2 only sleeps when running the [smart firmware](https://wiki.apolloautomation.com/products/h2/troubleshooting/reflash/). These steps apply when it is running that firmware. + + **Method 1: Reset button.** Press and release the reset (left) button to restart the device. + + **Method 2: Boot button.** Quickly press and hold the boot (right) button for 4-5 seconds. + + ![](/assets/h-2-reset-and-boot-buttons-labeled.png) + + Button locations: [H-2 boot mode](https://wiki.apolloautomation.com/products/h2/troubleshooting/boot-mode/). + +Your device is now awake, but it will not stay awake on its own yet. Click the **Prevent Sleep** button on your device page in Home Assistant, or directly on the device web server such as plt-1.local or its IP address. !!! success "Head to the awake helper wiki article" - If you need to keep your sensor awake for extended periods of time we suggest using our [OTA awake helper](https://wiki.apolloautomation.com/products/general/battery-sensors/awake-ha-helper/). \ No newline at end of file + If you need to keep your sensor awake for extended periods of time we suggest using our [OTA awake helper](https://wiki.apolloautomation.com/products/general/battery-sensors/awake-ha-helper/). diff --git a/docs/products/h1/battery-sensors/wake-up-battery-sensor.md b/docs/products/h1/battery-sensors/wake-up-battery-sensor.md new file mode 100644 index 0000000000..f6d27b3bef --- /dev/null +++ b/docs/products/h1/battery-sensors/wake-up-battery-sensor.md @@ -0,0 +1 @@ +--8<-- "products/general/battery-sensors/wake-up-battery-sensor.md:5:" diff --git a/docs/products/h1/boot-mode.md b/docs/products/h1/boot-mode.md index ba3789e523..745748819e 100755 --- a/docs/products/h1/boot-mode.md +++ b/docs/products/h1/boot-mode.md @@ -12,7 +12,7 @@ This will cover how to put the H-1 into boot mode. Sometimes, this is needed to 2\. Press and hold the boot button, while holding the boot button plug the H-1 back into your computer/power and then release the boot button -3\. Continue with [uploading the firmware](https://wiki.apolloautomation.com/products/h1/code/) +3\. Continue with [uploading the firmware](https://wiki.apolloautomation.com/products/h1/reflash/) ## **Boot and Reset Buttons** @@ -20,4 +20,4 @@ This will cover how to put the H-1 into boot mode. Sometimes, this is needed to 2\. Press and hold the boot button, while holding it press and release the reset button, then release the boot button -3\. Continue with [uploading the firmware](https://wiki.apolloautomation.com/products/h1/code/) \ No newline at end of file +3\. Continue with [uploading the firmware](https://wiki.apolloautomation.com/products/h1/reflash/) \ No newline at end of file diff --git a/docs/products/h1/getting-started.md b/docs/products/h1/getting-started.md index 0f98b424e7..4ce8327c1d 100755 --- a/docs/products/h1/getting-started.md +++ b/docs/products/h1/getting-started.md @@ -24,7 +24,7 @@ Once the ornament is awake, press the gold button (see image below) to play one 4\. Add to Home Assistant (Optional): -For additional customization, you will need to flash the [smart H-1 firmware](https://wiki.apolloautomation.com/products/h1/code/) and then connect to Home Assistant following the [setup guide](https://wiki.apolloautomation.com/products/general/setup/getting-started/). Through Home Assistant, you can add new songs, change LED effects, and create custom automations. +For additional customization, you will need to flash the [smart H-1 firmware](https://wiki.apolloautomation.com/products/h1/reflash/) and then connect to Home Assistant following the [setup guide](https://wiki.apolloautomation.com/products/general/setup/getting-started/). Through Home Assistant, you can add new songs, change LED effects, and create custom automations. 5\. Enjoy Your Ornament: diff --git a/docs/products/h1/code.md b/docs/products/h1/reflash.md similarity index 71% rename from docs/products/h1/code.md rename to docs/products/h1/reflash.md index c02f472961..5ecdf3c93f 100755 --- a/docs/products/h1/code.md +++ b/docs/products/h1/reflash.md @@ -10,23 +10,23 @@ If your device has already been connected to Home Assistant previously please re 2. Navigate to our installer page and click connect [\*\* Install Page \*\*](https://apolloautomation.github.io/H-1/) 3. Select your Apollo device, it will show with a similar name to the one below, and click connect. If you aren't sure which device it is, you can unplug the sensor and see which disappears. -[![ComSelection.png](https://apolloautomation.github.io/docs/products/mtr1/assets/comselection.png)](https://apolloautomation.github.io/docs/products/mtr1/assets/comselection.png) +![](/assets/comselection.png) If no device shows, click cancel and then install the recommended driver that shows on the popup. If you have installed the driver, tried different cables, and it still won't work refer [here](https://wiki.apolloautomation.com/products/h1/boot-mode/) for putting the sensor in bootloader mode and then retry step 3. 4\. Choose to install the new firmware -[![](https://apolloautomation.github.io/docs/products/mtr1/assets/image-1698806750134.png)](https://apolloautomation.github.io/docs/products/mtr1/assets/image-1698806750134.png) +![](/assets/image-1698806750134.png) 5\. Wait for the installer to finish - if you see "ERROR Logger is not configured!" that is totally expected! The logger is disabled to make more room for other components on the microcontroller. -[![](https://apolloautomation.github.io/docs/products/mtr1/assets/image-1698806082666.png)](https://apolloautomation.github.io/docs/products/mtr1/assets/image-1698806082666.png) +![](/assets/image-1698806082666.png) 6\. VERY IMPORTANT - you need to unplug your device and plug it back in to leave boot mode! -1. After finishing, check for the Apollo hotspot and connect. This might not show if you previously had the MTR-1 connected to your wifi +1. After finishing, check for the Apollo hotspot and connect. This might not show if you previously had the H-1 connected to your wifi 2. Log into Home Assistant and go to the ESPHome app check to see if you can adopt the device. If you encounter the below error, please complete the [Putting H-1 In Boot Mode Document](https://wiki.apolloautomation.com/products/h1/boot-mode/) and go back to step 3. -[![](https://apolloautomation.github.io/docs/products/mtr1/assets/image-1698806793309.png)](https://apolloautomation.github.io/docs/products/mtr1/assets/image-1698806793309.png) \ No newline at end of file +![](/assets/image-1698806793309.png) \ No newline at end of file diff --git a/docs/products/h2/battery-sensors/wake-up-battery-sensor.md b/docs/products/h2/battery-sensors/wake-up-battery-sensor.md new file mode 100644 index 0000000000..f6d27b3bef --- /dev/null +++ b/docs/products/h2/battery-sensors/wake-up-battery-sensor.md @@ -0,0 +1 @@ +--8<-- "products/general/battery-sensors/wake-up-battery-sensor.md:5:" diff --git a/mkdocs.yml b/mkdocs.yml index e98d6e740b..782792defa 100755 --- a/mkdocs.yml +++ b/mkdocs.yml @@ -496,6 +496,7 @@ nav: - General Tips: products/btn1/setup/general-tips.md - Sensor Definitions: products/btn1/setup/sensor-definitions.md - Prevent Sleep: products/btn1/additional-info/prevent-sleep.md + - How To Wake Up Your Sensor: products/btn1/battery-sensors/wake-up-battery-sensor.md - Examples: - Blueprint: products/btn1/examples/blueprint.md - Troubleshooting: @@ -532,16 +533,20 @@ nav: - Introduction: products/h1/introduction.md - FAQ: products/h1/faq.md - Getting Started: products/h1/getting-started.md + - Additional Info: + - How To Wake Up Your Sensor: products/h1/battery-sensors/wake-up-battery-sensor.md - Reviews: products/h1/reviews.md - Examples: - Holiday Songs: products/general/holiday-songs.md - Troubleshooting: - H-1 Boot Mode: products/h1/boot-mode.md - - Factory Re-Flash H-1: products/h1/code.md + - Factory Re-Flash H-1: products/h1/reflash.md - H-2: - Introduction: products/h2/introduction.md - FAQ: products/h2/faq.md - Getting Started: products/h2/setup/getting-started.md + - Additional Info: + - How To Wake Up Your Sensor: products/h2/battery-sensors/wake-up-battery-sensor.md - Reviews: products/h2/h2-reviews.md - Examples: - Holiday Songs: products/h2/examples/holiday-songs.md @@ -833,6 +838,7 @@ nav: - General Tips: homey/products/btn1/setup/general-tips.md - Sensor Definitions: homey/products/btn1/setup/sensor-definitions.md - Prevent Sleep: homey/products/btn1/additional-info/prevent-sleep.md + - How To Wake Up Your Sensor: homey/products/btn1/battery-sensors/wake-up-battery-sensor.md - Addons: - BTN-1 Addon: homey/products/btn1/addons/btn1-addon.md - Examples: