diff --git a/docs/assets/esphome-starter-kit-disassembly-final.gif b/docs/assets/esphome-starter-kit-disassembly-final.gif new file mode 100755 index 0000000000..a3bf8b704d Binary files /dev/null and b/docs/assets/esphome-starter-kit-disassembly-final.gif differ diff --git a/docs/assets/esphome-starter-kit-fpc-cable-1.gif b/docs/assets/esphome-starter-kit-fpc-cable-1.gif new file mode 100755 index 0000000000..8e8309660b Binary files /dev/null and b/docs/assets/esphome-starter-kit-fpc-cable-1.gif differ diff --git a/docs/assets/esphome-starter-kit-fpc-cable.gif b/docs/assets/esphome-starter-kit-fpc-cable.gif new file mode 100755 index 0000000000..8e8309660b Binary files /dev/null and b/docs/assets/esphome-starter-kit-fpc-cable.gif differ diff --git a/docs/products/ESPHome-Starter-Kit/setup/getting-started-advanced.md b/docs/products/ESPHome-Starter-Kit/setup/getting-started-advanced.md index 404d7eeefa..8364bbc883 100755 --- a/docs/products/ESPHome-Starter-Kit/setup/getting-started-advanced.md +++ b/docs/products/ESPHome-Starter-Kit/setup/getting-started-advanced.md @@ -18,7 +18,7 @@ The ESP32-C6 is the main board in your kit. It is the small module with the USB- For your first project, we will attach the LED & Buzzer module (ten RGB LEDs and a piezo buzzer) to the ESP32-C6 module of your device using the FPC connector and ribbon cable. You can connect to the top or bottom FPC connector - in this example we will connect it to the top! -  +![](../../../assets/esphome-starter-kit-fpc-cable-1.gif) ### Connect the C6 to your computer diff --git a/docs/products/ESPHome-Starter-Kit/start-here.md b/docs/products/ESPHome-Starter-Kit/start-here.md index 5f0c2b9f1a..8fed5be448 100755 --- a/docs/products/ESPHome-Starter-Kit/start-here.md +++ b/docs/products/ESPHome-Starter-Kit/start-here.md @@ -30,10 +30,7 @@ Each module is connected to the panel by small breakaway tabs. Follow the steps 1. Hold the panel flat on a table with one hand on the module you want to remove. 2. Gently flex the panel along the tab line until the tab snaps cleanly. - +![](../../assets/esphome-starter-kit-disassembly-final.gif) ## Meet the modules